860 research outputs found
Bow-Tie Microstrip Antenna Design
In this paper, the bow-tie microstrip antennas have been designed with two different angles of 40° and 80°. An investigaton on the effect of the angle to the return loss and radiation patterns had been carried out. The impedance matching network with the niicrostrip transmission line feeding was used in this study. Simulation and measurement results for the return loss and radiation patterns were presented
Effects of Solder Temperature on Pin Through-Hole during Wave Soldering: Thermal-Fluid Structure Interaction Analysis
An efficient simulation technique was proposed to examine the thermal-fluid structure interaction in the effects of solder
temperature on pin through-hole during wave soldering. This study investigated the capillary flow behavior as well as the
displacement, temperature distribution, and von Mises stress of a pin passed through a solder material. A single pin throughhole
connector mounted on a printed circuit board (PCB) was simulated using a 3D model solved by FLUENT. The ABAQUS
solver was employed to analyze the pin structure at solder temperatures of 456.15 K (183∘C)
Pembuatan Buku Makanan Tradisional Surabaya Sebagai Upaya Pelestarian Produk Lokal
The design goal as preserving local products and a bridge to the limited information about the existence of traditional foods in Surabaya. Then the production of this book was done by interview, observation, literature and existing studies are useful for determining the design concept. Through analysis of the theme of concept design is obtained Rescue Culture. The concept of the stretcher to be a theme in the book-making, and taking pictures, which showed that most of the traditional food is all around us. Results of a book deal is expected to help increase public awareness that it is important to preserve the local product with regard to its existence
Modified EDF Goodness of Fit Tests for Logistic Distribution under SRS and RSS
Modified forms of goodness of fit tests are presented for the logistic distribution using statistics based on the empirical distribution function (EDF). A method to improve the power of the modified EDF goodness of fit tests is introduced based on Ranked Set sampling (RSS). Data are collected via the Ranked Set Sampling (RSS) technique (McIntyre, 1952). Critical values for the logistic distribution with unknown parameters are provided and the powers of the tests are given for a number of alternative distributions. A simulation study is presented to illustrate the power of the new method
The impact of board diversity on financial reporting quality in the GCC listed firms: the role of family and royal directors
The present study examines the impact of board diversity on financial
reporting quality with special consideration of the extent to
which family and royal directors influence financial reporting quality
(FRQ). The study utilises a sample of 181 listed GCC firms over the
period from 2010 to 2016. Board personal attributes, including board
expertise, age, gender, and nationality are investigated along with
some other board issues such as; board size, meetings, and independence.
Panel data analysis with fixed and random effect models
are conducted to estimate the results. The results reveal that companies
with large board size and greater age have less FRQ. Further, the
results report that institutional founders, higher board independence,
and expertise associate with greater levels of FRQ. The results
also find that board meetings and family founders negatively influence
FRQ. However, female directors, foreign directors, and royal
board members setting in the board did not contribute to the levels
of FRQ in the sampled companies. Finally, the results indicate that
companies with a CEO royal member have higher levels of FRQ however,
companies with chair board royals have less levels of FRQ. This
research has valuable implications for investors, board of directors,
analysts, academicians, and policymakers
Process Control of Pink Guava Puree Pasteurization Process: Simulation and Validation by Experiment
Recently, process control has been applied extensively in many food processes include pasteurization process. The purpose is to control and maintain the product temperature at desired value. In order to be able to control the process properly, the model of the process needs to be obtained. This research aims to obtain the empirical model and to determine the best control strategy in pasteurization process of pink guava puree. The PID controller tuned by different tuning methods was simulated using Simulink and closed loop responses were observed. Simulation results revealed that PID controller tuned by minimizing of integral absolute error (IAE) method were satisfactory adaptable in this process in term of faster settling time, less overshoot, smallest values of IAE and ISE that less than 1. Then, experiment was performed using this method in order to validate simulation results. In general, a good agreement was achieved between experimental data and dynamic simulation result in control of pasteurization temperature process with R2=0.83. As the conclusion, the results obtained can be used as the recommendation for a suitable control strategy for the pasteurization process of pink guava puree in the industry
Protonated carbon nitride incorporated polyamide thin film nanocomposite for reverse osmosis desalination
Protonated carbon nitride (pCN) prepared from acid treatment of carbon nitride (CN) was incorporated in the polysulfone (PSf) substrate and polyamide (PA) layer to produce thin film nanocomposite (TFN) membrane. The hydrophilicity of CN is expected to improve the surface hydrophilicity of the membrane and acid treatment of nanoparticle is aimed to further enhance the surface structure and prevent the agglomeration of nanomaterial from taking place. pCN loading used in the PSf substrate was 0.5% while in the PA layer was varied as 0.05%, 0.1% and 0.15%. All the membrane prepared were characterized in terms of morphology, structural properties, and surface chemistry. Reverse osmosis dead-end filtration system was used to determine the water permeability and the salt rejection. It was observed that, all the membrane prepared could maintain the salt rejection with improvement of water permeability. However, the salt rejection was sacrificed when higher loading of 0.15% pCN was tested, although the water permeability of the membrane has reached approximately 0.5 LMHbar. This work demonstrates that the use of pCN in RO membrane can improve the water permeability without sacrificing the salt rejection
Recent trends in biodiesel production from commonly used animal fats
Changes in climate due to the enormous amount of carbon dioxide emissions have really encouraged the development of energy sources that are renewable, sustainable, and eco-friendly. The development of alternative energy sources can also be attributed to the rapid decrease in resources of fossil energy. Biodiesel has gained significant interest in recent years due to its fossil fuel–like properties and sustainable and eco-friendly characteristics. However, most biodiesels are expensive because of the high cost of feedstock largely based on edible vegetable oil sources. The use of animal fats waste as cost effective feedstock in biodiesel production has gained considerable attention in recent years. Although, most studies regarding the use of animal wastes as feedstock in biodiesel production are still in the early stages, the advantages of this type of feedstock have been highlighted in the literature. However, most studies have not focus on the recent advances in the use of animal fats waste. The studies on the use of novel approach have been reported in isolation. Therefore, this current study attempts to highlight recent developments of the most commonly used animal fats waste in the production of biodiesel. In addition, emphasis was given to the most appropriate production technique, catalyst, energy requirement, and optimum reaction conditions
INVESTIGATING THE ROLE OF NF-κB, COX-1, COX-2, COMT, IL-10, IL-6 AND TNF-α IN MODULATING ANTI-NOCICEPTIVE ACTIVITY OF METHANOLIC EXTRACT OF ENTADA PHASEOLOIDES
Objective: To investigate the analgesic activity of methanolic extract of Entada phaseoloides (MEEP) along with its molecular mechanistic pathway.
Methods: Swiss albino female mice and Wistar rats of either sex were administered orally with MEEP extracts (100, 200 and 400 mg/kg) and pentazocine, tramadol and diclofenac sodium, as standard drugs. Following administration, anti-nociceptive activity was evaluated using an acetic acid-induced writhing test, Eddy’s hot plate, and hot water immersion test. Serum was collected for molecular expression of various proteins and genes using Reverse Transcriptase PCR and Western Blotting.
Results: Acetic acid writhing test, a frequently used method to assess peripheral analgesic activity, revealed that MEEP reduced peripherally induced pain in a dose-dependent manner. Likewise, Eddy’s hot plate and hot water immersion methods, often implicated for testing central analgesic activities, showed that MEEP is bestowed with the capability to counteract analgesia in a dose and time-dependent manner. Pro-inflammatory cytokines and factors like COX-2, IL-6, TNF-α, and NF-κB that cause inflammatory responses and pain were significantly reduced, suggesting its analgesic and anti-inflammatory potential. This analgesic and the anti-inflammatory role played by MEEP is also supported by the up-regulation of anti-inflammatory cytokine IL-10 and COMT and COX-1 enzyme demonstrated no significant difference between the groups.
Conclusion: The study revealed the weak peripheral and potent central analgesic property MEEP by modulating pro-inflammatory and anti-inflammatory pathways
- …