A Fast Induction Motor Speed Estimation based on Hybrid Particle Swarm Optimization (HPSO)

AbstractIntelligent control and estimation of power electronic systems by fuzzy logic and neural network techniques with fast torque and flux show tremendous promise in future. This paper proposed the application of Hybrid Particle Swarm Optimization (HPSO) for losses and operating cost minimization control in the induction motor drives. The main advantages of the proposed technique are; its simple structure and its straightforward maximization of induction motor efficiency and its operating cost for a given load torque. As will be demonstrated, Hybrid Particle Swarm Optimization (HPSO) is so efficient in finding the optimum operating machine's flux level. The results demonstrate the good quality and robustness in the system dynamic response and reduction in the steady-state and transient motor ripple torque

Are UK E-waste recycling facilities a source of environmental contamination and occupational exposure to brominated flame retardants?

Investigations into the impacts of regulated electrical and electronic waste (e-waste) recycling activities on urban environments in Europe remain rather scarce. In this study, dust samples taken both inside and outside of five UK e-waste recycling facilities were analysed for concentrations of polybrominated diphenyl ethers (PBDEs), novel brominated flame retardants (NBFRs), and hexabromocyclododecane (HBCDD). Average concentrations of ∑BFRs in dust inside and outside UK e-waste recycling facilities were 12,000 ng/g and 180 ng/g, with median concentrations of 7500 ng/g and 85 ng/g, respectively. BDE-209 and decabromodiphenyl ethane (DBDPE) were the most abundant BFRs in both indoor and kerb dust, making a combined contribution to ∑BFRs of ~90 % on average. While four out of the five studied e-waste facilities showed a lack of significant impact on BFR contamination in surrounding environment, one of the studied e-waste recycling facilities was identified as a likely source of BFR contamination to UK urban environments, with industrial activities as another potential source of NBFRs. Occupational exposure of UK e-waste recycling workers to BFRs via dust ingestion was generally lower than that estimated for e-waste recyclers from other countries, but was comparable to BFR exposure via dust ingestion of UK office workers. Our estimates suggested that health burdens posed by dust ingestion of BFRs were minimal for UK e-waste recycling workers.</p

Production of four-quark states with double heavy quarks at LHC

We study the hadronic production of four-quark states with double heavy quarks and double light antiquarks at LHC. The production mechanism is that a color anti-triplet diquark cluster consisting of double heavy quarks is formed first from the produced double heavy quark-antiquark pairs via $gg$ fusion hard process, followed by the fragmentation of the diquark cluster into a four-quark (tetraquark) state. Predictions for the production cross sections and their differential distributions are presented. Our results show that it is quite promising to discover these tetraquark states in LHC experiments both for large number events and for their unique signatures in detectors.Comment: 17 pages,8 figure

Assessment of human dermal absorption of flame retardant additives in polyethylene and polypropylene microplastics using 3D human skin equivalent models

Data availability: Data will be made available on request.Supplementary material is available online at: https://www.sciencedirect.com/science/article/pii/S0160412024002216#:~:text=Appendix%20A.-,Supplementary%20material,-Data%20availability .To overcome ethical and technical challenges impeding the study of human dermal uptake of chemical additives present in microplastics (MPs), we employed 3D human skin equivalent (3D-HSE) models to provide first insights into the dermal bioavailability of polybrominated diphenyl ether (PBDEs) present in MPs; and evaluated different factors influencing human percutaneous absorption of PBDEs under real-life exposure scenario. PBDEs were bioavailable to varying degrees (up to 8 % of the exposure dose) and percutaneous permeation was evident, albeit at low levels (≤0.1 % of the exposure dose). While the polymer type influenced the release of PBDEs from the studied MPs to the skin, the polymer type was less important in driving the percutaneous absorption of PBDEs. The absorbed fraction of PBDEs was strongly correlated (r2 = 0.88) with their water solubility, while the dermal permeation coefficient Papp of PBDEs showed strong association with their molecular weight and logKOW. More sweaty skin resulted in higher bioavailability of PBDEs from dermal contact with MPs than dry skin. Overall, percutaneous absorption of PBDEs upon skin contact with MPs was evident, highlighting, for the first time, the potential significance of the dermal pathway as an important route of human exposure to toxic additive chemicals in MPs.European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska - Curie Individual Fellowship Grant Agreement Number 101026229

Impact of Legislation on Brominated Flame Retardant Concentrations in UK Indoor and Outdoor Environments:Evidence for Declining Indoor Emissions of Some Legacy BFRs

Concentrations of polybrominated diphenyl ethers, hexabromocyclododecane (HBCDD), and novel brominated flame retardants (NBFRs) were measured in indoor dust, indoor air, and outdoor air in Birmingham, UK. Concentrations of ΣBFRs ranged from 490 to 89,000 ng/g, 46–14,000 pg/m3, and 22–11,000 pg/m3, respectively, in UK indoor dust, indoor air, and outdoor air. BDE-209 and decabromodiphenyl ethane (DBDPE) were the main contributors. The maximum concentration of DBDPE (10,000 pg/m3) in outdoor air is the highest reported anywhere to date. In contrast with previous studies of outdoor air in Birmingham, we observed significant correlations between concentrations of tri- to hepta-BDEs and HBCDD and temperature. This may suggest that primary emissions from ongoing use of these BFRs have diminished and that secondary emissions (e.g., evaporation from soil) are now a potentially major source of these BFRs in outdoor air. Conversely, the lack of significant correlations between temperature and concentrations of BDE-209 and DBDPE may indicate that ongoing primary emissions from indoor sources remain important for these BFRs. Further research to clarify the relative importance of primary and secondary sources of BFRs to outdoor air is required. Comparison with earlier studies in Birmingham reveals significant (p &lt; 0.05) declines in concentrations of legacy BFRs, but significant increases for NBFRs over the past decade. While there appear minimal health burdens from BFR exposure for UK adults, dust ingestion of BDE-209 may pose a significant risk for UK toddlers

Genome-wide mRNA and miRNA expression profiling reveal multiple regulatory networks in colorectal cancer

Despite recent advances in cancer management, colorectal cancer (CRC) remains the third most common cancer and a major health-care problem worldwide. MicroRNAs have recently emerged as key regulators of cancer development and progression by targeting multiple cancer-related genes; however, such regulatory networks are not well characterized in CRC. Thus, the aim of this study was to perform global messenger RNA (mRNA) and microRNA expression profiling in the same CRC samples and adjacent normal tissues and to identify potential miRNA-mRNA regulatory networks. Our data revealed 1273 significantly upregulated and 1902 downregulated genes in CRC. Pathway analysis revealed significant enrichment in cell cycle, integrated cancer, Wnt (wingless-type MMTV integration site family member), matrix metalloproteinase, and TGF-β pathways in CRC. Pharmacological inhibition of Wnt (using XAV939 or IWP-2) or TGF-β (using SB-431542) pathways led to dose- and time-dependent inhibition of CRC cell growth. Similarly, our data revealed up- (42) and downregulated (61) microRNAs in the same matched samples. Using target prediction and bioinformatics, ~77% of the upregulated genes were predicted to be targeted by microRNAs found to be downregulated in CRC. We subsequently focused on EZH2 (enhancer of zeste homolog 2 ), which was found to be regulated by hsa-miR-26a-5p and several members of the let-7 (lethal-7) family in CRC. Significant inverse correlation between EZH2 and hsa-miR-26a-5p (R(2)=0.56, P=0.0001) and hsa-let-7b-5p (R(2)=0.19, P=0.02) expression was observed in the same samples, corroborating the belief of EZH2 being a bona fide target for these two miRNAs in CRC. Pharmacological inhibition of EZH2 led to significant reduction in trimethylated histone H3 on lysine 27 (H3K27) methylation, marked reduction in cell proliferation, and migration in vitro. Concordantly, small interfering RNA-mediated knockdown of EZH2 led to similar effects on CRC cell growth in vitro. Therefore, our data have revealed several hundred potential miRNA-mRNA regulatory networks in CRC and suggest targeting relevant networks as potential therapeutic strategy for CRC

Organophosphate triesters and their diester degradation products in the atmosphere:A critical review

Organophosphate triesters (tri-OPEs) have found substantial use as plasticizers and flame retardants in commercial and industrial products. Despite upcoming potential restrictions on use of OPEs, widespread environmental contamination is likely for the foreseeable future. Organophosphate diesters (di-OPEs) are known biotic or abiotic degradation products of tri-OPEs. In addition, direct use of di-OPEs as commercial products also contributes to their presence in the atmosphere. We review the available data on contamination with tri-OPEs and di-OPEs in both indoor and outdoor air. Concentrations of tri-OPEs in indoor air exceed those in outdoor air. The widespread discovery of tri-OPE traces in polar regions and oceans is noteworthy and is evidence that they undergo long-range transport. There are only two studies on di-OPEs in outdoor air and no studies on di-OPEs in indoor air until now. Current research on di-OPEs in indoor and outdoor air is urgently needed, especially in countries with potentially high exposure to di-OPEs such as the UK and the US. Di-OPE concentrations are higher at e-waste dismantling areas than at surrounding area. We also summarise the methods employed for sampling and analysis of OPEs in the atmosphere and assess the relative contribution to atmospheric concentrations of di-OPEs made by environmental degradation of triesters, compared to the presence of diesters as by-products in commercial triester products. Finally, we identify shortcomings of current research and provide suggestions for future research.</p

How Students View the Role of Faculty Advisors in the SWE Organization

The Society of Women Engineers (SWE) collegiate sections attract many men and women to the society, and they can be among the largest and most active student organizations on the university campuses. A key factor to boost membership is the active involvement of faculty advisors, who serve as the liaison between SWE collegiate sections, the university, the National SWE organization, and professional SWE members. A group of SWE faculty advisors previously conducted a survey of faculty advisors and counselors, with advisors and counselors aggregated in the results, to determine what aspects of their role they consider most significant, and how they engage with the students. The study showed that faculty advisors play an important role in providing continuity to the section, participation in and understanding of the larger organization, and in mentoring students on both general leadership and SWE leadership. This paper examines how students view the role of their faculty advisor in their SWE collegiate section. The objectives of this study are to understand the challenges that collegiate sections face and what types of support they need from their faculty advisor. A survey about the level of importance of different roles of faculty advisors was conducted. Additional ways students feel their faculty advisor could help them was also addressed. The data was analyzed to identify key factors that faculty advisors should consider while serving in these roles within student sections. The findings were then compared to the results of the self-assessment of the faculty advisors