2,632 research outputs found

    Investigation of stacking faults in MOVPE-grown zincblende GaN by XRD and TEM

    Get PDF
    X-ray diffraction and bright-field transmission electron microscopy are used to investigate the distribution and density of {111}-type stacking faults (SFs) present in a heteroepitaxial zincblende GaN epilayer with high phase purity, grown on a 3C-SiC/Si (001) substrate by metalorganic vapour-phase epitaxy. It is found that the 4° miscut towards the [110] direction of the substrate, that prevents the formation of undesirable antiphase domains, has a profound effect on the relative densities of SFs occurring on the different {111} planes. The two orientations of SFs in the [-110] zone, where the SF inclination angle with the GaN/SiC interface is altered by the 4° miscut, show a significant difference in density, with the steeper (111) SFs being more numerous than the shallower (-1-11) SFs by a factor of ~ 5 at 380 nm from the GaN/SiC interface. In contrast, the two orientations of SFs in the [110] zone, which is unaffected by the miscut, have densities comparable with the (-1-11) SFs in the [-110] zone. A simple model, simulating the propagation and annihilation of SFs in zincblende GaN epilayers, reproduces the presence of local SF bunches observed in TEM data. The model also verifies that a difference in the starting density at the GaN/SiC interface of the two orientations of intersecting {111} SFs in the same zone reduces the efficiency of SF annihilation. Hence, (111) SFs have a higher density compared with SFs on the other three {111} planes, due to their preferential formation at the GaN/SiC interface caused by the miscut.the Ministry of Education, Youth and Sports of the Czech Republi

    A tri-dimensional approach for auditing brand loyalty

    Get PDF
    Over the past twenty years brand loyalty has been an important topic for both marketing practitioners and academics. While practitioners have produced proprietary brand loyalty audit models, there has been little academic research to make transparent the methodology that underpins these audits and to enable practitioners to understand, develop and conduct their own audits. In this paper, we propose a framework for a brand loyalty audit that uses a tri-dimensional approach to brand loyalty, which includes behavioural loyalty and the two components of attitudinal loyalty: emotional and cognitive loyalty. In allowing for different levels and intensity of brand loyalty, this tri-dimensional approach is important from a managerial perspective. It means that loyalty strategies that arise from a brand audit can be made more effective by targeting the market segments that demonstrate the most appropriate combination of brand loyalty components. We propose a matrix with three dimensions (emotional, cognitive and behavioural loyalty) and two levels (high and low loyalty) to facilitate a brand loyalty audit. To demonstrate this matrix, we use the example of financial services, in particular a rewards-based credit card

    Suicide, self-harm and thoughts of suicide or self-harm in infectious disease epidemics: a systematic review and meta-analysis.

    Get PDF
    AIMS: Suicide accounts for 2.2% of all years of life lost worldwide. We aimed to establish whether infectious epidemics are associated with any changes in the incidence of suicide or the period prevalence of self-harm, or thoughts of suicide or self-harm, with a secondary objective of establishing the frequency of these outcomes. METHODS: In this systematic review and meta-analysis, MEDLINE, Embase, PsycINFO and AMED were searched from inception to 9 September 2020. Studies of infectious epidemics reporting outcomes of (a) death by suicide, (b) self-harm or (c) thoughts of suicide or self-harm were identified. A random-effects model meta-analysis for the period prevalence of thoughts of suicide or self-harm was conducted. RESULTS: In total, 1354 studies were screened with 57 meeting eligibility criteria, of which 7 described death by suicide, 9 by self-harm, and 45 thoughts of suicide or self-harm. The observation period ranged from 1910 to 2020 and included epidemics of Spanish Flu, severe acute respiratory syndrome, human monkeypox, Ebola virus disease and coronavirus disease 2019 (COVID-19). Regarding death by suicide, data with a clear longitudinal comparison group were available for only two epidemics: SARS in Hong Kong, finding an increase in suicides among the elderly, and COVID-19 in Japan, finding no change in suicides among children and adolescents. In terms of self-harm, five studies examined emergency department attendances in epidemic and non-epidemic periods, of which four found no difference and one showed a reduction during the epidemic. In studies of thoughts of suicide or self-harm, one large survey showed a substantial increase in period prevalence compared to non-epidemic periods, but smaller studies showed no difference. As a secondary objective, a meta-analysis of thoughts of suicide and self-harm found that the pooled prevalence was 8.0% overall (95% confidence interval (CI) 5.2-12.0%; 14 820 of 99 238 cases in 24 studies) over a time period of between seven days and six months. The quality assessment found 42 studies were of high quality, nine of moderate quality and six of high quality. CONCLUSIONS: There is little robust evidence on the association of infectious epidemics with suicide, self-harm and thoughts of suicide or self-harm. There was an increase in suicides among the elderly in Hong Kong during SARS and no change in suicides among young people in Japan during COVID-19, but it is unclear how far these findings may be generalised. The development of up-to-date self-harm and suicide statistics to monitor the effect of the current pandemic is an urgent priority

    Suicide, self-harm and thoughts of suicide or self-harm in infectious disease epidemics: a systematic review and meta-analysis (vol 30, pg 1, 2021)

    Get PDF
    Aims: Suicide accounts for 2.2% of all years of life lost worldwide. We aimed to establish whether infectious epidemics are associated with any changes in the incidence of suicide or the period prevalence of self-harm, or thoughts of suicide or self-harm, with a secondary objective of establishing the frequency of these outcomes. Methods: In this systematic review and meta-analysis, MEDLINE, Embase, PsycINFO and AMED were searched from inception to 9 September 2020. Studies of infectious epidemics reporting outcomes of (a) death by suicide, (b) self-harm or (c) thoughts of suicide or self-harm were identified. A random-effects model meta-analysis for the period prevalence of thoughts of suicide or self-harm was conducted. Results: In total, 1354 studies were screened with 57 meeting eligibility criteria, of which 7 described death by suicide, 9 by self-harm, and 45 thoughts of suicide or self-harm. The observation period ranged from 1910 to 2020 and included epidemics of Spanish Flu, severe acute respiratory syndrome, human monkeypox, Ebola virus disease and coronavirus disease 2019 (COVID-19). Regarding death by suicide, data with a clear longitudinal comparison group were available for only two epidemics: SARS in Hong Kong, finding an increase in suicides among the elderly, and COVID-19 in Japan, finding no change in suicides among children and adolescents. In terms of self-harm, five studies examined emergency department attendances in epidemic and non-epidemic periods, of which four found no difference and one showed a reduction during the epidemic. In studies of thoughts of suicide or self-harm, one large survey showed a substantial increase in period prevalence compared to non-epidemic periods, but smaller studies showed no difference. As a secondary objective, a meta-analysis of thoughts of suicide and self-harm found that the pooled prevalence was 8.0% overall (95% confidence interval (CI) 5.2–12.0%; 14 820 of 99 238 cases in 24 studies) over a time period of between seven days and six months. The quality assessment found 42 studies were of low quality, nine of moderate quality and six of high quality. Conclusions: There is little robust evidence on the association of infectious epidemics with suicide, self-harm and thoughts of suicide or self-harm. There was an increase in suicides among the elderly in Hong Kong during SARS and no change in suicides among young people in Japan during COVID-19, but it is unclear how far these findings may be generalised. The development of up-to-date self-harm and suicide statistics to monitor the effect of the current pandemic is an urgent priority

    Adsorption and Thermal Decomposition of Triphenyl Bismuth on Silicon (001)

    Get PDF
    We investigate the adsorption and thermal decomposition of triphenyl bismuth (TPB) on the silicon (001) surface using atomic-resolution scanning tunneling microscopy, synchrotron-based X-ray photoelectron spectroscopy, and density functional theory calculations. Our results show that the adsorption of TPB at room temperature creates both bismuth–silicon and phenyl–silicon bonds. Annealing above room temperature leads to increased chemical interactions between the phenyl groups and the silicon surface, followed by phenyl detachment and bismuth subsurface migration. The thermal decomposition of the carbon fragments leads to the formation of silicon carbide at the surface. This chemical understanding of the process allows for controlled bismuth introduction into the near surface of silicon and opens pathways for ultra-shallow doping approaches

    Emotions in business-to-business service relationships

    Get PDF
    Emotion in business-to-business service relationships regarding cargo services is explored. The service relationship is characterised by mutual trust and cooperation. Contact is mainly via telephone or e-mail with some face-to-face interactions and participants providing a complex, multi-skilled seamless service. Experience rather than training plays a vital role with long-term service relationships built up and maintained. Emotional sensitivity is acquired partly by experience and a repeat customer base but mainly through a genuine desire to help and get to know others. In contrast to the view of emotional labour bringing managerial control or adverse affects to service staff, the emotion engendered by this work is authentic expression bringing personal satisfaction

    Novel mutation in YMDD motif and direct neighbourhood in a child with chronic HBV-infection and clinical lamivudine and adefovir resistance - a scholarly case

    Get PDF
    <p>Abstract</p> <p>Context</p> <p>Chronic HBV infection is a major cause of hepatocellular carcinoma (HCC) which meanwhile has become the 5<sup>th </sup>most reason for a fatal outcome of cancer. Worldwide, approximately 350 million people are chronically HBV infected and as such of risk to develop HCC, of those an estimated high rate of children. Treatment of chronic infection is sufficient to reduce the rate of HCC but the rate of sustained virological response remains to low, not at least due to emergence of resistant virus strains. Less is known on HBV infection in children despite the extremely high rate of chronicity.</p> <p>Objective, Design, Setting, and Patient</p> <p>The case of a nine years old male with a 6 year history of chronic HBV infection, of those 5 years with antiviral treatment is described.</p> <p>Interventions and Main Outcome Measure(s)</p> <p>Before our lab was consulted, the patient was unsuccessfully treated with interferon, an obscure drug named Hepon, which should activate antiviral immune response, and Lamivudine, the latter most likely becoming ineffective due to the mergence of resistant subpopulations (rtL180 M, rtV207 M, two strains with stop codons at position rt188 and rt198, rtM204V (YVDD), rtM204K (YKDD)). Replacement of Lamivudine by adefovir displayed no advantage despite the lack of resistance mutations, thus no decrease in viremia was observed under adefovir treatment.</p> <p>Results and Conclusions</p> <p>Novel mutations in the YMDD motif and its direct neighbourhood were observed, both being compatible with Lamivudine resistance. No mutations were found that are associated with ADF resistance. Both, the clinical course of treatment and the genotypic resistance profile emphasize the need for systematic analyses of the HBV resistance mechanisms and structured therapy concept also for children chronically infected with HBV.</p

    Oceanic Sharks Clean at Coastal Seamount

    Get PDF
    Interactions between pelagic thresher sharks (Alopias pelagicus) and cleaner wrasse were investigated at a seamount in the Philippines. Cleaning associations between sharks and teleosts are poorly understood, but the observable interactions seen at this site may explain why these mainly oceanic sharks regularly venture into shallow coastal waters where they are vulnerable to disturbance from human activity. From 1,230 hours of observations recorded by remote video camera between July 2005 and December 2009, 97 cleaner-thresher shark events were analyzed, 19 of which were interrupted. Observations of pelagic thresher sharks interacting with cleaners at the seamount were recorded at all times of day but their frequency declined gradually from morning until evening. Cleaners showed preferences for foraging on specific areas of a thresher shark's body. For all events combined, cleaners were observed to conduct 2,757 inspections, of which 33.9% took place on the shark's pelvis, 23.3% on the pectoral fins, 22.3% on the caudal fin, 8.6% on the body, 8.3% on the head, 2.1% on the dorsal fin, and 1.5% on the gills respectively. Cleaners did not preferentially inspect thresher sharks by time of day or by shark sex, but there was a direct correlation between the amount of time a thresher shark spent at a cleaning station and the number of inspections it received. Thresher shark clients modified their behavior by “circular-stance-swimming,” presumably to facilitate cleaner inspections. The cleaner-thresher shark association reflected some of the known behavioral trends in the cleaner-reef teleost system since cleaners appeared to forage selectively on shark clients. Evidence is mounting that in addition to acting as social refuges and foraging grounds for large visiting marine predators, seamounts may also support pelagic ecology by functioning as cleaning stations for oceanic sharks and rays

    Nanofiber fabrication in a temperature and humidity controlled environment for improved fibre consistency

    Get PDF
    To fabricate nanofibers with reproducible characteristics, an important demand for many applications, the effect of controlled atmospheric conditions on resulting electrospun cellulose acetate (CA) nanofibers was evaluated for temperature ranging 17.5 - 35&#xb0;C and relative humidity ranging 20% - 70%. With the potential application of nanofibers in many industries, especially membrane and filter fabrication, their reproducible production must be established to ensure commercially viability.&#xd;&#xa;Cellulose acetate (CA) solution (0.2 g/ml) in a solvent mixture of acetone/DMF/ethanol (2:2:1) was electrospun into nonwoven fibre mesh with the fibre diameter ranging from 150nm to 1&#xb5;m.&#xd;&#xa;The resulting nanofibers were observed and analyzed by scanning electron microscopy (SEM), showing a correlation of reducing average fibre diameter with increasing atmospheric temperature. A less pronounced correlation was seen with changes in relative humidity regarding fibre diameter, though it was shown that increased humidity reduced the effect of fibre beading yielding a more consistent, and therefore better quality of fibre fabrication.&#xd;&#xa;Differential scanning calorimetry (DSC) studies observed lower melt enthalpies for finer CA nanofibers in the first heating cycle confirming the results gained from SEM analysis. From the conditions that were explored in this study the temperature and humidity that gave the most suitable fibre mats for a membrane purpose were 25.0&#xb0;C and 50%RH due to the highest level of fibre diameter uniformity, the lowest level of beading while maintaining a low fibre diameter for increased surface area and increased pore size homogeneity. This study has highlighted the requirement to control the atmospheric conditions during the electrospinning process in order to fabricate reproducible fibre mats
    corecore