11 research outputs found

    The usefulness and feasibility of a screening instrument to identify psychosocial problems in patients receiving curative radiotherapy: a process evaluation

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Psychosocial problems in cancer patients are often unrecognized and untreated due to the low awareness of the existence of these problems or pressures of time. The awareness of the need to identify psychosocial problems in cancer patients is growing and has affected the development of screening instruments. This study explored the usefulness and feasibility of using a screening instrument (SIPP: Screening Inventory of Psychosocial Problems) to identify psychosocial problems in cancer patients receiving curative radiotherapy treatment (RT).</p> <p>Methods</p> <p>The study was conducted in a radiation oncology department in the Netherlands. Several methods were used to document the usefulness and feasibility of the SIPP. Data were collected using self-report questionnaires completed by seven radiotherapists and 268 cancer patients.</p> <p>Results</p> <p>Regarding the screening procedure 33 patients were offered to consult a psychosocial care provider (e.g. social worker, psychologist) during the first consultation with their radiotherapist. Of these patients, 31 patients suffered from at least sub-clinical symptoms and two patients hardly suffered from any symptoms. Patients' acceptance rate 63.6% (21/33) was high. Patients were positive about the content of the SIPP (mean scores vary from 8.00 to 8.88, out of a range between 0 and 10) and about the importance of discussing items of the SIPP with their radiotherapist (mean score = 7.42). Radiotherapists' perspectives about the contribution of the SIPP to discuss the different psychosocial problems were mixed (mean scores varied from 3.17 to 4.67). Patients were more positive about discussing items of the SIPP if the radiotherapists had positive attitudes towards screening and discussing psychosocial problems.</p> <p>Conclusions</p> <p>The screening procedure appeared to be feasible in a radiotherapy department. In general, patients' perspectives were at least moderate. Radiotherapists considered the usefulness and feasibility of the SIPP generally to be lower, but their evaluations were mixed. A positive attitude to using screening instruments like the SIPP needs to be encouraged among radiotherapists, as this may not only improve the usefulness of a screening instrument, but also patients' satisfaction with care.</p> <p>Trial Registration</p> <p>ClinicalTrials.gov: <a href="http://www.clinicaltrials.gov/ct2/show/NCT00859768">NCT00859768</a></p

    Competition in Frisian Past Participles

    Get PDF
    This paper evaluates recent developments in the inflection of Frisian past participles and how to account for them with the aid of a model of morphological productivity. In Frisian, there are two alternative types of past participles which both have their origin in the South-western dialect region of Fryslân, but of which only one is spreading productively across the whole language area. The natural existence of contact between the original dialect region and the rest of the language area, in theory enables both alternative types to spread. Also, both of them can be described with rules. We will therefore argue that the reason for the spread of only one of the alternatives is due to the productivity of its underlying rule. Specifically, we will argue that the Tolerance Principle (Yang, Linguis Var Yearb 5(1):265–302, 2005, The price of linguistic productivity: how children learn to break the rules of language. MIT Press, 2016) predicts both the difference in productivity between the two alternatives, as well as the productive spread of one of the alternatives outwards from the dialect region in which it originate

    Overview of the JET results

    No full text
    Since the last IAEA Conference JET has been in operation for one year with a programmatic focus on the qualification of ITER operating scenarios, the consolidation of ITER design choices and preparation for plasma operation with the ITER-like wall presently being installed in JET. Good progress has been achieved, including stationary ELMy H-mode operation at 4.5 MA. The high confinement hybrid scenario has been extended to high triangularity, lower ρ*and to pulse lengths comparable to the resistive time. The steady-state scenario has also been extended to lower ρ*and ν*and optimized to simultaneously achieve, under stationary conditions, ITER-like values of all other relevant normalized parameters. A dedicated helium campaign has allowed key aspects of plasma control and H-mode operation for the ITER non-activated phase to be evaluated. Effective sawtooth control by fast ions has been demonstrated with3He minority ICRH, a scenario with negligible minority current drive. Edge localized mode (ELM) control studies using external n = 1 and n = 2 perturbation fields have found a resonance effect in ELM frequency for specific q95values. Complete ELM suppression has, however, not been observed, even with an edge Chirikov parameter larger than 1. Pellet ELM pacing has been demonstrated and the minimum pellet size needed to trigger an ELM has been estimated. For both natural and mitigated ELMs a broadening of the divertor ELM-wetted area with increasing ELM size has been found. In disruption studies with massive gas injection up to 50% of the thermal energy could be radiated before, and 20% during, the thermal quench. Halo currents could be reduced by 60% and, using argon/deuterium and neon/deuterium gas mixtures, runaway electron generation could be avoided. Most objectives of the ITER-like ICRH antenna have been demonstrated; matching with closely packed straps, ELM resilience, scattering matrix arc detection and operation at high power density (6.2 MW m-2) and antenna strap voltages (42 kV). Coupling measurements are in very good agreement with TOPICA modelling. \ua9 2011 IAEA, Vienna

    Overview of the JET results

    No full text
    Since the last IAEA Conference JET has been in operation for one year with a programmatic focus on the qualification of ITER operating scenarios, the consolidation of ITER design choices and preparation for plasma operation with the ITER-like wall presently being installed in JET. Good progress has been achieved, including stationary ELMy H-mode operation at 4.5 MA. The high confinement hybrid scenario has been extended to high triangularity, lower ρ*and to pulse lengths comparable to the resistive time. The steady-state scenario has also been extended to lower ρ*and ν*and optimized to simultaneously achieve, under stationary conditions, ITER-like values of all other relevant normalized parameters. A dedicated helium campaign has allowed key aspects of plasma control and H-mode operation for the ITER non-activated phase to be evaluated. Effective sawtooth control by fast ions has been demonstrated with3He minority ICRH, a scenario with negligible minority current drive. Edge localized mode (ELM) control studies using external n = 1 and n = 2 perturbation fields have found a resonance effect in ELM frequency for specific q95values. Complete ELM suppression has, however, not been observed, even with an edge Chirikov parameter larger than 1. Pellet ELM pacing has been demonstrated and the minimum pellet size needed to trigger an ELM has been estimated. For both natural and mitigated ELMs a broadening of the divertor ELM-wetted area with increasing ELM size has been found. In disruption studies with massive gas injection up to 50% of the thermal energy could be radiated before, and 20% during, the thermal quench. Halo currents could be reduced by 60% and, using argon/deuterium and neon/deuterium gas mixtures, runaway electron generation could be avoided. Most objectives of the ITER-like ICRH antenna have been demonstrated; matching with closely packed straps, ELM resilience, scattering matrix arc detection and operation at high power density (6.2 MW m-2) and antenna strap voltages (42 kV). Coupling measurements are in very good agreement with TOPICA modelling. \ua9 2011 IAEA, Vienna

    Overview of the JET results

    No full text
    Since the last IAEA Conference JET has been in operation for one year with a programmatic focus on the qualification of ITER operating scenarios, the consolidation of ITER design choices and preparation for plasma operation with the ITER-like wall presently being installed in JET. Good progress has been achieved, including stationary ELMy H-mode operation at 4.5 MA. The high confinement hybrid scenario has been extended to high triangularity, lower ρ*and to pulse lengths comparable to the resistive time. The steady-state scenario has also been extended to lower ρ*and ν*and optimized to simultaneously achieve, under stationary conditions, ITER-like values of all other relevant normalized parameters. A dedicated helium campaign has allowed key aspects of plasma control and H-mode operation for the ITER non-activated phase to be evaluated. Effective sawtooth control by fast ions has been demonstrated with3He minority ICRH, a scenario with negligible minority current drive. Edge localized mode (ELM) control studies using external n = 1 and n = 2 perturbation fields have found a resonance effect in ELM frequency for specific q95values. Complete ELM suppression has, however, not been observed, even with an edge Chirikov parameter larger than 1. Pellet ELM pacing has been demonstrated and the minimum pellet size needed to trigger an ELM has been estimated. For both natural and mitigated ELMs a broadening of the divertor ELM-wetted area with increasing ELM size has been found. In disruption studies with massive gas injection up to 50% of the thermal energy could be radiated before, and 20% during, the thermal quench. Halo currents could be reduced by 60% and, using argon/deuterium and neon/deuterium gas mixtures, runaway electron generation could be avoided. Most objectives of the ITER-like ICRH antenna have been demonstrated; matching with closely packed straps, ELM resilience, scattering matrix arc detection and operation at high power density (6.2 MW m-2) and antenna strap voltages (42 kV). Coupling measurements are in very good agreement with TOPICA modelling. \ua9 2011 IAEA, Vienna

    Overview of JET results

    No full text
    corecore