Intimal Surface Suture Line (End-Product) Assessment of End-to-Side Microvascular Anastomosis.

Microsurgery simulation courses increasingly use assessment methodologies to evaluate the quality of microvascular anastomosis and to provide constructive feedback in competency-based training. Assessment tools evaluating the "journey" of skill acquisition in anastomosis have evolved, including global rating scores, hand motion analysis, and evaluation of the final outcome, that is, "end-product" assessment. Anastomotic patency is the gold standard end-product in clinical microvascular surgery, and in vivo end-to-side anastomosis, which can be confirmed using the Acland-test. Microsurgery simulation training is moving to include nonliving models, where possible, according to the principles of the replacement, reduction, and refinement of the use of animals in research. While a standardized end-product assessment tool for nonliving end-to-end anastomosis exists, there is no similar tool for end-to-side anastomosis. Intimal surface suture line assessment is an error list-based tool, which involves exposing the intimal surface of a vessel and analysis of the quality of suture placement. Errors in end-to side anastomosis were classified according to the potential clinical significance (high, medium, or low) perceived by the senior authors. Intimal surface suture line assessment provides constructive feedback during microsurgery training, helping to minimize technical errors, which are likely to impact on the final outcome in a clinical environment. Intimal surface suture line assessment lends itself to nonliving simulation training courses as an end-product self-assessment tool, especially during the early learning curve, to demonstrate progression. It has intraoperative relevance by assessment of the intimal surface suture line as the final sutures are placed in an end-to-side anastomosis to provide objective feedback to trainees in relation to likely physiological anastomotic outcome

Is visual estimation of passive range of motion in the pediatric lower limb valid and reliable

<p>Abstract</p> <p>Background</p> <p>Visual estimation (VE) is an essential tool for evaluation of range of motion. Few papers discussed its validity in children orthopedics' practice. The purpose of our study was to assess validity and reliability of VE for passive range of motions (PROMs) of children's lower limbs.</p> <p>Methods</p> <p>Fifty typically developing children (100 lower limbs) were examined. Visual estimations for PROMs of hip (flexion, adduction, abduction, internal and external rotations), knee (flexion and popliteal angle) and ankle (dorsiflexion and plantarflexion) were made by a pediatric orthopaedic surgeon (POS) and a 5^thyear resident in orthopaedics. A last year medical student did goniometric measurements. Three weeks later, same measurements were performed to assess reliability of visual estimation for each examiner.</p> <p>Results</p> <p>Visual estimations of the POS were highly reliable for hip flexion, hip rotations and popliteal angle (ρ_c≥ 0.8). Reliability was good for hip abduction, knee flexion, ankle dorsiflexion and plantarflexion (ρ_c≥ 0.7) but poor for hip adduction (ρ_c= 0.5). Reproducibility for all PROMs was verified. Resident's VE showed high reliability (ρ_c≥ 0.8) for hip flexion and popliteal angle. Good correlation was found for hip rotations and knee flexion (ρ_c≥ 0.7). Poor results were obtained for ankle PROMs (ρ_c< 0.6) as well as hip adduction and abduction, the results of which not being reproducible. Influence of experience was clearly demonstrated for PROMs of hip rotations, adduction and abduction as well as ankle plantarflexion.</p> <p>Conclusion</p> <p>Accuracy of VE of passive hip flexion and knee PROMs is high regardless of the examiner's experience. Same accuracy can be found for hip rotations and abduction whenever VE is performed by an experienced examiner. Goniometric evaluation is recommended for passive hip adduction and for ankle PROMs.</p

IL-3 and oncogenic Abl regulate the myeloblast transcriptome by altering mRNA stability

The growth factor interleukin-3 (IL-3) promotes the survival and growth of multipotent hematopoietic progenitors and stimulates myelopoiesis. It has also been reported to oppose terminal granulopoiesis and to support leukemic cell growth through autocrine or paracrine mechanisms. The degree to which IL-3 acts at the posttranscriptional level is largely unknown. We have conducted global mRNA decay profiling and bioinformatic analyses in 32Dcl3 myeloblasts indicating that IL-3 caused immediate early stabilization of hundreds of transcripts in pathways relevant to myeloblast function. Stabilized transcripts were enriched for AU-Response elements (AREs), and an ARE-containing domain from the interleukin-6 (IL-6) 3′-UTR rendered a heterologous gene responsive to IL-3-mediated transcript stabilization. Many IL-3-stabilized transcripts had been associated with leukemic transformation. Deregulated Abl kinase shared with IL-3 the ability to delay turnover of transcripts involved in proliferation or differentiation blockade, relying, in part, on signaling through the Mek/ Erk pathway. These findings support a model of IL-3 action through mRNA stability control and suggest that aberrant stabilization of an mRNA network linked to IL-3 contributes to leukemic cell growth. © 2009 Ernst et al

Handheld computers for self-administered sensitive data collection: A comparative study in Peru

<p>Abstract</p> <p>Background</p> <p>Low-cost handheld computers (PDA) potentially represent an efficient tool for collecting sensitive data in surveys. The goal of this study is to evaluate the quality of sexual behavior data collected with handheld computers in comparison with paper-based questionnaires.</p> <p>Methods</p> <p>A PDA-based program for data collection was developed using Open-Source tools. In two cross-sectional studies, we compared data concerning sexual behavior collected with paper forms to data collected with PDA-based forms in Ancon (Lima).</p> <p>Results</p> <p>The first study enrolled 200 participants (18–29 years). General agreement between data collected with paper format and handheld computers was 86%. Categorical variables agreement was between 70.5% and 98.5% (Kappa: 0.43–0.86) while numeric variables agreement was between 57.1% and 79.8% (Spearman: 0.76–0.95). Agreement and correlation were higher in those who had completed at least high school than those with less education. The second study enrolled 198 participants. Rates of responses to sensitive questions were similar between both kinds of questionnaires. However, the number of inconsistencies (p = 0.0001) and missing values (p = 0.001) were significantly higher in paper questionnaires.</p> <p>Conclusion</p> <p>This study showed the value of the use of handheld computers for collecting sensitive data, since a high level of agreement between paper and PDA responses was reached. In addition, a lower number of inconsistencies and missing values were found with the PDA-based system. This study has demonstrated that it is feasible to develop a low-cost application for handheld computers, and that PDAs are feasible alternatives for collecting field data in a developing country.</p

Fatigue life of machined components

A correlation between machining process and fatigue strength of machined components clearly exists. However, a complete picture of the knowledge on this is not readily available for practical applications. This study addresses this issue by investigating the effects of machining methods on fatigue life of commonly used materials, such as titanium alloys, steel, aluminium alloys and nickel alloys from previous literature. Effects of turning, milling, grinding and different non-conventional machining processes on fatigue strength of above-mentioned materials have been investigated in detail with correlated information. It is found that the effect of materials is not significant except steel in which phase change causes volume expansion, resulting in compressive/tensile residual stresses based on the amounts of white layers. It is very complex to identify the influence of surface roughness on the fatigue strength of machined components in the presence of residual stresses. The polishing process improves the surface roughness, but removes the surface layers that contain compressive residual stresses to decrease the fatigue strength of polished specimens. The compressive and tensile residual stresses improve and reduce fatigue strength, respectively. Grinding process induces tensile residual stresses on the machined surfaces due to high temperature generation. On the other hand, milling and turning processes induce compressive residual stresses. High temperature non-conventional machining generates a network of micro-cracks on the surfaces in addition to tensile residual stresses to subsequently reduce fatigue strength of machined components. Embedded grits of abrasive water jet machining degrade the fatigue performance of components machined by this method

Neurosyphilis manifesting with unilateral visual loss and hyponatremia: a case report

<p>Abstract</p> <p>Background</p> <p>Syphilis is called the chameleon of the diseases due to its variety of its clinical presentations, potentially affecting every organ of the body. Incidence of this ancient disease is once again on the increase worldwide.</p> <p>Case presentation</p> <p>We here report an unusual case of neurosyphilis manifesting with unilateral visual loss and hyponatremia. The patient also had primary syphilitic lesions and was concomitantly diagnosed with Human Immunodeficiency Virus (HIV), Hepatitis B Virus (HBV) and Hepatitis C Virus (HCV) infection. Treatment with ceftriaxone and prednisolone, completely resolved the hyponatremia and visual acuity was partially restored.</p> <p>Conclusion</p> <p>Awareness of syphilis as a differential diagnosis is important as previously unreported presentations of neurosyphilis can arise, especially in HIV infected patients.</p

Whole-body imaging of the musculoskeletal system: the value of MR imaging

In clinical practice various modalities are used for whole-body imaging of the musculoskeletal system, including radiography, bone scintigraphy, computed tomography, magnetic resonance imaging (MRI), and positron emission tomography-computed tomography (PET-CT). Multislice CT is far more sensitive than radiographs in the assessment of trabecular and cortical bone destruction and allows for evaluation of fracture risk. The introduction of combined PET-CT scanners has markedly increased diagnostic accuracy for the detection of skeletal metastases compared with PET alone. The unique soft-tissue contrast of MRI enables for precise assessment of bone marrow infiltration and adjacent soft tissue structures so that alterations within the bone marrow may be detected before osseous destruction becomes apparent in CT or metabolic changes occur on bone scintigraphy or PET scan. Improvements in hard- and software, including parallel image acquisition acceleration, have made high resolution whole-body MRI clinically feasible. Whole-body MRI has successfully been applied for bone marrow screening of metastasis and systemic primary bone malignancies, like multiple myeloma. Furthermore, it has recently been proposed for the assessment of systemic bone diseases predisposing for malignancy (e.g., multiple cartilaginous exostoses) and muscle disease (e.g., muscle dystrophy). The following article gives an overview on state-of-the-art whole-body imaging of the musculoskeletal system and highlights present and potential future applications, especially in the field of whole-body MRI