Rf Deflector Based Sub-Ps Beam Diagnostics:. Application to Fel and Advanced Accelerators

RF deflectors are very promising devices for longitudinal and transverse phase space characterization and beam manipulation in advanced accelerators. Measurement setups for longitudinal pulse shape as well as phase space and transverse beam slice emittance characterizations are described as well the main design criteria of traveling wave and standing wave RF deflectors used for beam diagnostics putting in evidence the advantages or disadvantages of the two devices in terms of performances, required power and power limitations

Longitudinal beam dynamics simulation in electron rings in strong rf focusing regime

Obtaining very short bunches in an electron storage ring is one of the frontiers of the accelerator physics. The strong rf focusing (SRFF) is a way to have short bunches at a given position in the ring, thanks to the principle of the bunch length modulation. Until now, the bunch length modulation has been studied only in the limit of zero current; in this paper we present the results of a simulation code suitable to study the effects of coherent synchrotron radiation and vacuum chamber wakefields on the single bunch longitudinal dynamics in the SRFF regime . The code has been applied to three different lattices that can be realized in the Frascati e^{+}/e^{-} collider DAΦNE for a possible experiment on bunch length modulation

TE Wave Measurement and Modeling

In the TE wave method, microwaves are coupled into the beam-pipe and the effect of the electron cloud on these microwaves is measured. An electron cloud (EC) density can then be calculated from this measurement. There are two analysis methods currently in use. The first treats the microwaves as being transmitted from one point to another in the accelerator. The second more recent method, treats the beam-pipe as a resonant cavity. This paper will summarize the reasons for adopting the resonant TE wave analysis as well as give examples from CESRTA and DA{\Phi}NE of resonant beam-pipe. The results of bead-pull bench measurements will show some possible standing wave patterns, including a cutoff mode (evanescent) where the field decreases exponentially with distance from the drive point. We will outline other recent developments in the TE wave method including VORPAL simulations of microwave resonances, as well as the simulation of transmission in the presence of both an electron cloud and magnetic fields.Comment: Presented at ECLOUD'12: Joint INFN-CERN-EuCARD-AccNet Workshop on Electron-Cloud Effects, La Biodola, Isola d'Elba, Italy, 5-9 June 2012; CERN-2013-002, pp. 193-20

Thermal simulations for optical transition radiation screen for Eli-NP compton gamma source

The ELI-NP GBS (Extreme Light Infrastructure-Nuclear Physics Gamma Beam Source) is a high brightness elec-tron LINAC that is being built in Romania. The goal for this facility is to provide high luminosity gamma beam through Compton Backscattering. A train of 32 bunches at 100Hz with a nominal charge of 250pC is accelerated up to 740 MeV. Two interaction points with an IR Laser beam produces the gamma beam at different energies. In order to measure the electron beam spot size and the beam proper-ties along the train, the OTR screens must sustain the ther-mal and mechanical stress due to the energy deposited by the bunches. This paper is an ANSYS study of the issues due to the high quantity of energy transferred to the OTR screen. They will be shown different analysis, steady-state and thermal transient analysis, where the input loads will be the internal heat generation equivalent to the average power, deposited by the ELI-GBS beam in 512 ns, that is the train duration. Each analyses will be followed by the structural analysis to investigate the performance of the OTR materi

New technology based on clamping for high gradient radio frequency photogun

High gradient rf photoguns have been a key development to enable several applications of high quality electron beams. They allow the generation of beams with very high peak current and low transverse emittance, satisfying the tight demands for free-electron lasers, energy recovery linacs, Compton/Thomson sources and high-energy linear colliders. In the present paper we present the design of a new rf photogun recently developed in the framework of the SPARC_LAB photoinjector activities at the laboratories of the National Institute of Nuclear Physics in Frascati (LNF-INFN, Italy). This design implements several new features from the electromagnetic point of view and, more important, a novel technology for its realization that does not involve any brazing process. From the electromagnetic point of view the gun presents high mode separation, low peak surface electric field at the iris and minimized pulsed heating on the coupler. For the realization, we have implemented a novel fabrication design that, avoiding brazing, strongly reduces the cost, the realization time and the risk of failure. Details on the electromagnetic design, low power rf measurements and high power radiofrequency and beam tests performed at the University of California in Los Angeles (UCLA) are discussed in the paper