Tribology in Ballroom Dance With Energy Consumption Analysis

Tribology phenomena are obviously present and have significant importance in most of human activities, processes and actions. Ballroom Dance as a common activitie with practically importance is not enough studied and analyzed from the tribological point of view. This paper presents an attempt in this direction dealing with study of tribology aspects by analyzing a couple of Standard and Latin ballroom dances with characteristic steps and choreography. This paper shows an approximate calculation of friction forces and torques caused by some common movements and their influence on interaction in foot floor interface. Besides the approximate calculation of friction loss, authors have measured and analyze the total energy consumption by making several experiments with corresponding equipment

Study of the synthesis, structure and properties of the derivatives of 4,6-disubstituted-3-cyano-2-pyridones

U cilju proučavanja strukture i svojstava derivata 4,6-disupstituisanih-3-cijano-2-piridona izvršena je sintez a dve serije jedinjenja: N -(supstituisani fenil)-3-cijano - 4,6- dimetil-2-piridona i 3-cijano-4-(supstituisani fenil)-6-fenil-2(1 H )-piridona. Ispitan je uticaj temperature, vremena reakcije i molskog odnosa reaktanata na prinos i čistoću proizvoda dobijenih različitim klasičnim metodama sinteze, kao i mikrotalasnom sintezom sa ili bez rastvarača...In order to study structure and properties of 4,6-disubstituted- 3-cyano-2-pyridones a synthesis of two series of N -(substituted phenyl)-3-cyano-4, 6-dimethyl-2-pyridones and 3- cyano-4-(substituted phenyl)-6-phenyl-2(1 H )-pyridones have been done. Influences of different reaction parameters: temperature, reaction time and reactant molar ratio on the purity and product yield have been studied. The compounds was obtained by different classical methods, as well as microwave method us ing solvent or by solvent free synthesis

Separation and determination of dimethylarsenate in natural waters

A simple and efficient method for separation and determination of dimethylarsenate DMAs(V) was developed in this work. Two resins, a strong base anion exchange (SBAE) resin and iron-oxide coated hybrid (HY) resin were tested. By simple adjusting pH value of water at 7.00, DMAs(V) passed through the HY column without any changes, while all other arsenic species [inorganic arsenic and monomethylarsonate, MMAs(V)] were quantitatively bonded on HY resin. The resin capacity was calculated according to the breakthrough points in a fixed bed flow system. At pH 7.00 the HY resins bonded more than 4150 μg g-1 of As(III), 3500 μg g-1 of As(V) and 1500 μg g1 of MMAs(V). Arsenic adsorption behavior in the presence of impurities showed tolerance with the respect to potential interference of anions commonly found in natural water. DMAs(V) was determined in the effluent by ICP-MS. The detection limit was 0.03 μg L?1 and relative standard deviation (RSD) was between 1.1?7.5 %. Proposed method was established performing standard procedures: with external standard, certified reference material and the standard addition method

ESI-MS spectra of 3-cyano-4-(substituted phenyl)-6-phenyl-2(1H)-pyridinones

Twelve 3-cyano-4-(substituted phenyl)-6-phenyl-2(1H)-pyridinones were investigated by tandem mass spectrometry using positive as well as negative electrospray ionization. The influence of the electron affinity of the substituent and the steric effect on the fragmentation is discussed. Pyridinones with a substituent of low proton affinity show loss of water, HCN or benzene from the pyridinone ring in the first step of MS2 fragmentations. Oppositely, if a substituent with high proton affinity is present on the phenyl ring in the 4-position of pyridinone, the fragmentation paths are complex, depending mainly on the substituent proton acceptor ability. Elimination of neutral molecules CO, HCN, H2O, PhH (benzene) or Ph and CN radicals are fragmentation processes common for all compounds in the subsequent steps of the fragmentations

Eco-friendly Elderberry based sorbent for removing Pb2+ ions from aqueous solutions

Elderberry (Sambucus nigra) pith was modified with polyethyleneimine (PEI) in order to improve the adsorption properties. Characterization of both dried Sambucus nigra pith (DSNP) and amino modification of elderberry pith with branched PEI (PEI/DSNP) was performed by: Fourier-transform infrared spectroscopy (FTIR), optical microscopy, and porosity determination. The amine and ester number, as well as acid value, were determined on DSNP and PEI/DSNP samples using standard volumetric methods. The samples were used as adsorbents for Pb2+ ions from an aqueous solution in a batch system. The obtained results were fitted using suitable equilibrium isotherm and kinetic models. The maximum adsorption capacity for Pb2+ ions on DSNP and aminаted sample, obtained using Langmuir adsorption isotherm at 298 K, are 18.9 and 47.8 mg g-1, respectively. Based on the kinetic studies, the adsorption process follows the pseudo second-order model. Thermodynamic parameters showed that the adsorption process is endothermic and spontaneous. In general, the overall adsorption process was improved by modifying starting material with branched PEI modifier by introducing large numbers of amino functionalities having high affinity to cations

Microwave-Assisted of synthesis and characterizations of levulinic acid (LA)

Levulinic acid (4-oxopentanoic acid) (LA) is a two-functional γ-keto acid widely used in a production of pharmaceuticals, ethyl levulinate, the substance which is widely used in the cream and perfume industry, polymers, plasticizers, biofuel, resins, and various other additives. LA was synthesized by the dehydration of fructose in a strongly acidic aqueous medium, using diluted hydrochloric acid, and subjected to microwave irradiation at different operational conditions. LA was further used in two subsequent steps of peroxidation and dehydration to obtain 3-hydroxypropanoic acid and maleic anhydride (MA) and acrylic acid (AA), respectively, which could be used for acrylic ester synthesis which could be used as a monomer in a polyacrylate production (Figure 1).Poster presented at: 7 th Conference of Young Chemists of Serbia, Belgrad

Primena modifikovanih tanina u antikorozionim alkidnim premazima

The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and their use in alkyd based coatings to improve anticorrosive properties is presented in this work. Two methods of tannin modification were applied: direct method using ammonium hydroxide, ammonium hydroxide/ammonium chloride buffer or diethylenetriamine (DETA); and a two-step method including tannin modification with epichlorohydrin (ECH) in first step to produce epoxy modified tannin, ET, and further modification with heteroaromatic amines or linseed oil fatty acids (LFA) in second step. The obtained anticorrosive additives were characterized using ATR-FTIR, 1H and 13C NMR spectroscopies and elemental analysis. Epoxy, amino, hydroxyl, acid and iodine values of the synthesized inhibitors were determined according to standard methods. The prepared alkyd coating with tannin inhibitors was tested according to standard SRPS EN ISO 4628 method. Anticorrosive coating containing modified tannin based additive showed increased anticorrosive properties, good adhesion and coverage comparing to the coating with zinc phosphate additive. The alkyd coating films based on ET-LFA and ET modified with 2-amino-5- mercapto-1,3,4-thiadiazole showed best anticorrosive results.U ovom radu prikazana je sinteza antikorozionih aditiva na bazi hemijski modifikovanog tanina i njihova primena u alkidnim premazima u cilju poboljšanja antikorozionih svojstava. Prikazane su dve metode modifikacije tanina: direktna modifikacija tanina primenom amonijum-hidroksida, amonijum-hidroksid/amonijum-hlorid pufera ili dietilentriamina (DETA); i dvostepena modifikacija tanina koja u prvom stupnju uključuje modifikaciju epihlorhidrinom sa ciljem da se dobije tannin sa epoksi terminiranim funkcionalnim grupama, ET, i modifikaciju ET tanina sa heteroaromatičnim aminima ili masnim kiselinama izolovanim iz lanenog ulja (LFA) u drugom stupnju. Sintetisani antikorozioni aditivi su okarakterisani primenom ATR-FTIR, 1H i 13C NMR spektroskopija, i elementalnom analizom. Sadržaj epoksi, amino, hidroksilnih i karboksilnih grupa i vrednost jodnog broja sintetisanih aditiva određen je prema standardnim metodama. Alkidni premazi koji sadrže antikorozione aditive na bazi modifikovanog tanina ispitani su prema standardnoj SRPS EN ISO 4628 metodi. Antikorozivni alkidni premazi na bazi modfikovanih tanina pokazali su poboljšane antikorozione karakteristike i adheziju u poređenju sa alkidnim premazom na bazi cink-fosfata. Alkidni premazi koji sadrže dvostepeno modifikovani tanin sa LFA i 2-amino-5-merkapto-1,3,4-tiadiazolom pokazali su najbolje antikorozione karakteristike

Voltammetric and Square-Wave Anodic Stripping Determination of Amlodipine Besylate on Gold Electrode

The oxidative behaviour of amlodipine besylate was studied. The gold electrode and Au/o-MWCNT (oxidized multi-wall carbon nanotubes) were used for determination of amlodipine besylate standard and as a content of Alopres tablet, in 0.05 M NaHCO3 and in phosphate buffer (pH=11) by cyclic voltammetry and square-wave anodic stripping voltammetry. Electrode surfaces were characterized by AFM in the presence of amlodipine and the concentrations of drugs in electrolytes were simultaneously followed by HPLC. The linear dependency of the anodic currents of amlodipine besylate as standard and in Alopres tablet vs. concentration was observed in both electrolytes, but in phosphate buffer for the higher concentrations. The peak currents obtained in all experiments are more than fifty-fold higher comparing to all previously published results concerning the glassy carbon electrode and the carbon paste electrode. The gold electrode is better catalyst for anodic oxidation of amlodipine besylate than glassy carbone. The results obtained with Au/o-MWCNT show lower anodic activity comparing to previously published GC/o-MWCNT. GC/o-MWCNT is better catalyst than Au/o-MWCNT under similar experimental conditions

Optimization of Microwave-Assisted synthesis of 5-hydroxymethyl-2-furfural

Heterocyclic furan-based compounds are interesting bio-renewable materials used as intermediate for pharmaceuticals, biodegradable resins, biofuels and fine chemicals syntheses. Additionally, HMF also functions as an anti-sickling agent for intermolecular sickle hemoglobin without inhibition by plasma and tissue proteins or other undesirable sequences.Poster presented at: 7 th Conference of Young Chemists of Serbia, Belgrad