51 research outputs found

    RETRACTED ARTICLE: Painful os intermetatarseum in athletes: a literature review of this condition is presented

    Get PDF
    Painful os intermetatarseum is a very rare condition. Gruber et al. first described os intermetatarseum in 1877. This condition is usually asymptomatic. One should consider painful os intermetatarseum as being a possible cause of dorsal foot pain in athletes. Surgical excision of the os intermetatarseum should be considered for those patients failing conservative treatment. Here, a literature review of this condition is presented

    Gene expression profiling of human ovarian tumours

    Get PDF
    There is currently a lack of reliable diagnostic and prognostic markers for ovarian cancer. We established gene expression profiles for 120 human ovarian tumours to identify determinants of histologic subtype, grade and degree of malignancy. Unsupervised cluster analysis of the most variable set of expression data resulted in three major tumour groups. One consisted predominantly of benign tumours, one contained mostly malignant tumours, and one was comprised of a mixture of borderline and malignant tumours. Using two supervised approaches, we identified a set of genes that distinguished the benign, borderline and malignant phenotypes. These algorithms were unable to establish profiles for histologic subtype or grade. To validate these findings, the expression of 21 candidate genes selected from these analyses was measured by quantitative RT–PCR using an independent set of tumour samples. Hierarchical clustering of these data resulted in two major groups, one benign and one malignant, with the borderline tumours interspersed between the two groups. These results indicate that borderline ovarian tumours may be classified as either benign or malignant, and that this classifier could be useful for predicting the clinical course of borderline tumours. Immunohistochemical analysis also demonstrated increased expression of CD24 antigen in malignant versus benign tumour tissue. The data that we have generated will contribute to a growing body of expression data that more accurately define the biologic and clinical characteristics of ovarian cancers

    A polarimetrically oriented X-ray stare at the accreting pulsar EXO 2030+375

    Get PDF
    Accreting X-ray pulsars (XRPs) are presumed to be ideal targets for polarization measurements, as their high magnetic field strength is expected to polarize the emission up to a polarization degree of 80%. However, such expectations are being challenged by recent observations of XRPs with the Imaging X-ray Polarimeter Explorer (IXPE). Here, we report on the results of yet another XRP, namely, EXO 2030+375, observed with IXPE and contemporarily monitored with Insight-HXMT and SRG/ART-XC. In line with recent results obtained with IXPE for similar sources, an analysis of the EXO 2030+375 data returns a low polarization degree of 0%- 3% in the phase-averaged study and a variation in the range of 2%- 7% in the phase-resolved study. Using the rotating vector model, we constrained the geometry of the system and obtained a value of 60 for the magnetic obliquity. When considering the estimated pulsar inclination of 130, this also indicates that the magnetic axis swings close to the observera's line of sight. Our joint polarimetric, spectral, and timing analyses hint toward a complex accreting geometry, whereby magnetic multipoles with an asymmetric topology and gravitational light bending significantly affect the behavior of the observed source

    Complex variations in X-ray polarization in the X-ray pulsar LS V +44 17/RX J0440.9+4431

    Get PDF
    We report on Imaging X-ray polarimetry explorer (IXPE) observations of the Be-transient X-ray pulsar LS V +44 17/RX J0440.9+4431 made at two luminosity levels during the giant outburst in January- February 2023. Considering the observed spectral variability and changes in the pulse profiles, the source was likely caught in supercritical and subcritical states with significantly different emission-region geometry, associated with the presence of accretion columns and hot spots, respectively. We focus here on the pulse-phase-resolved polarimetric analysis and find that the observed dependencies of the polarization degree and polarization angle (PA) on the pulse phase are indeed drastically different for the two observations. The observed differences, if interpreted within the framework of the rotating vector model (RVM), imply dramatic variations in the spin axis inclination, the position angle, and the magnetic colatitude by tens of degrees within the space of just a few days. We suggest that the apparent changes in the observed PA phase dependence are predominantly related to the presence of an unpulsed polarized component in addition to the polarized radiation associated with the pulsar itself. We then show that the observed PA phase dependence in both observations can be explained with a single set of RVM parameters defining the pulsar s geometry. We also suggest that the additional polarized component is likely produced by scattering of the pulsar radiation in the equatorial disk wind

    Polarized x-rays constrain the disk-jet geometry in the black hole x-ray binary Cygnus X-1

    Get PDF
    A black hole x-ray binary (XRB) system forms when gas is stripped from a normal star and accretes onto a black hole, which heats the gas sufficiently to emit x-rays. We report a polarimetric observation of the XRB Cygnus X-1 using the Imaging X-ray Polarimetry Explorer. The electric field position angle aligns with the outflowing jet, indicating that the jet is launched from the inner x-ray–emitting region. The polarization degree is 4.01 ± 0.20% at 2 to 8 kiloelectronvolts, implying that the accretion disk is viewed closer to edge-on than the binary orbit. These observations reveal that hot x-ray–emitting plasma is spatially extended in a plane perpendicular to, not parallel to, the jet axis

    Influência do resfriamento dinâmico na medição da tensão limite de escoamento

    Get PDF
    Non-Newtonian fluids may present several complex characteristics, such as viscoelasticity, plasticity and thixotropy. Understanding the behaviour of these materials is essential to facilitate its applicability, since many of them are present in daily life, such as gels, chocolate, and mayonnaise. The material studied on the present work was an waxy crude oil. The oil, present in reservoirs located in deep water, when subjected to low temperatures during production shutdowns, precipitates its paraffin, creating a structure which may be very resistant to flow. Thus, the formed material may represent a great difficulty to production restart. The design of pumps and compressors used in these systems depend on a rheological property called yield stress and therefore, it is essential to obtain reliable values of this rheological parameter. However, the complex behaviour, and the dependence of the crude oil characteristics on the shearing and temperature history make this a challenging task. Besides these, other factors may influence the measurement of yield stress, as the effect of wall slip and if the cooling is static or dynamic. This work shows the variation of yield stress for tests with dynamic cooling. The imposition of a stress during cooling caused the reduction in yield stress 0. Increasing the imposed stress, 0 decreased until it reached a minimum. Next, it was noticed an increase in yield stress with increasing imposed stress. The experiments carried out in this work were made in a commercial stress control rheometer. The effect of wall slip was tested by comparing smooth and rough geometries and it was verified signs of its presence, with the reduction of yield stress for smooth geometries. The equation of Weissenberg-Rabinowitsch, used for correction of the inhomogeneity of the shear stress along the radius geometry, seemed to be not necessary for the demonstrated results.Fluidos não newtonianos podem apresentar diversas características complexas, como a viscoelasticidade, plasticidade e tixotropia. Entender o comportamento de materiais tão complexos é fundamental para facilitar sua aplicabilidade, já que muitos estão presentes no cotidiano das pessoas, como géis, chocolate e maionese. O material estudado no presente trabalho foi um petróleo parafínico. O petróleo, presente em bacias localizadas em águas profundas, quando submetido a baixas temperaturas durante paradas de produção, precipita suas parafinas dando origem a uma estrutura que pode ser muito resistente ao escoamento. Dessa forma, o material formado pode representar uma grande dificuldade para o reinício da produção. O dimensionamento das bombas e compressores utilizados para retomada da produção depende de uma propriedade reológica denominada tensão limite de escoamento e, por isso, é fundamental obter valores confiáveis desse parâmetro reológico. No entanto, o comportamento complexo, e a dependência das características do petróleo com o histórico de cisalhamento e temperatura tornam a tarefa desafiadora. Outros fatores podem influenciar na medição da tensão limite de escoamento, como o efeito do escorregamento na parede do sensor da geometria e se o resfriamento é estático ou dinâmico. Este trabalho mostra a variação da tensão limite de escoamento para ensaios com resfriamento dinâmico. A imposição de tensão durante o resfriamento causou a redução da tensão limite de escoamento 0. Elevando-se a tensão imposta, 0 reduziu até atingir um valor mínimo. Em seguida, percebeu-se um aumento da tensão limite de escoamento com o aumento da tensão imposta. Os experimentos realizados neste trabalho foram feitos em um reômetro comercial do tipo tensão controlada (“stress controlled”). O efeito de escorregamento da amostra foi testado comparando geometrias com superfícies lisas e ranhuradas e foi possível verificar sinais de sua presença, com a redução da tensão limite de escoamento para geometrias lisas. A equação de Weissenberg-Rabinowitsch, utilizada para correção da não homogeneidade da tensão de cisalhamento ao longo do raio da geometria, mostrou-se não necessária para os resultados demonstrados

    Planck 2015 results I. Overview of products and scientific results

    Get PDF
    The European Space Agency's Planck satellite, which is dedicated to studying the early Universe and its subsequent evolution, was launched on 14 May 2009. It scanned the microwave and submillimetre sky continuously between 12 August 2009 and 23 October 2013. In February 2015, ESA and the Planck Collaboration released the second set of cosmology products based on data from the entire Planck mission, including both temperature and polarization, along with a set of scientific and technical papers and a web-based explanatory supplement. This paper gives an overview of the main characteristics of the data and the data products in the release, as well as the associated cosmological and astrophysical science results and papers. The data products include maps of the cosmic microwave background (CMB), the thermal Sunyaev-Zeldovich effect, diffuse foregrounds in temperature and polarization, catalogues of compact Galactic and extragalactic sources (including separate catalogues of Sunyaev-Zeldovich clusters and Galactic cold clumps), and extensive simulations of signals and noise used in assessing uncertainties and the performance of the analysis methods. The likelihood code used to assess cosmological models against the Planck data is described, along with a CMB lensing likelihood. Scientific results include cosmological parameters derived from CMB power spectra, gravitational lensing, and cluster counts, as well as constraints on inflation, non-Gaussianity, primordial magnetic fields, dark energy, and modified gravity, and new results on low-frequency Galactic foregrounds

    Current drive at plasma densities required for thermonuclear reactors

    No full text
    Progress in thermonuclear fusion energy research based on deuterium plasmas magnetically confined in toroidal tokamak devices requires the development of efficient current drive methods. Previous experiments have shown that plasma current can be driven effectively by externally launched radio frequency power coupled to lower hybrid plasma waves. However, at the high plasma densities required for fusion power plants, the coupled radio frequency power does not penetrate into the plasma core, possibly because of strong wave interactions with the plasma edge. Here we show experiments performed on FTU (Frascati Tokamak Upgrade) based on theoretical predictions that nonlinear interactions diminish when the peripheral plasma electron temperature is high, allowing significant wave penetration at high density. The results show that the coupled radio frequency power can penetrate into high-density plasmas due to weaker plasma edge effects, thus extending the effective range of lower hybrid current drive towards the domain relevant for fusion reactors
    corecore