487 research outputs found
QCD Corrections and the Endpoint of the Lepton Spectrum in Semileptonic B Decays
Recently, Neubert has suggested that a certain class of nonperturbative
corrections dominates the shape of the electron spectrum in the endpoint region
of semileptonic decay. Perturbative QCD corrections are important in the
endpoint region. We study the effects of these corrections on Neubert's
proposal. The connection between the endpoint of the electron spectrum in
semileptonic decay and the photon spectrum in is
outlined.Comment: 18 pages, uses REVTeX, UCSD/PTH 93-38, CALT-68-1910, JHU-TIPAC-930029
(some changes to the discussion of subleading radiative corrections, and
minor typos fixed
Structural, mechanical and swelling characteristics of 3D scaffolds from chitosan-agarose blends
This study aimed to explore the correlation between mechanical and structural properties of chitosan-agarose blend (Ch-Agrs) scaffolds. Porosity of Ch-Agrs scaffolds was constant at 93%, whilst pore sizes varied between 150 and 550 μm. Pore sizes of the blend scaffolds (150 - 300 μm) were significantly smaller than for either agarose or chitosan scaffolds alone (ca. 500 μm). Ch50-Agrs50 blend scaffold showed the highest compressive modulus and strength values (4.5 ± 0.4 and 0.35 ± 0.03 MPa) due to reduction in the pore size. The presence of agarose improved the stability of the blends in aqueous media. The increase in compressive properties and residual weight after the TGA test, combined with the reduction in the swelling percentage of the blend scaffolds suggested an interaction between chitosan and agarose via hydrogen bonding which was confirmed using FTIR analysis. All wet blend scaffolds exhibited instant recovery after full compression. This study shows the potential of Ch-Agrs scaffolds for repairing soft tissue
A SOM-based analysis of the drivers of the 2015–2017 Western Cape drought in South Africa
The multi-year (2015–2017) drought in the South West of the Western Cape (SWC) caused a severe water shortage in the summer of 2017–2018, with damaging impacts on the local and regional economy, and Cape Town being in the news one of the first major cities to potentially run out of water. Here, we assess the links between the rainfall deficits during the drought and (a) large scale circulation patterns, (b) moisture transport, and (c) convective available potential energy (CAPE). We used self-organising maps (SOM) analysis to classify daily ERA-interim 850 hPa geopotential height for the period 1979–2017 (March–October) into synoptic types. This allowed us to identify the dominant synoptic states over Southern Africa that influence the local climate in the area affected by the drought. The results show that (a) the frequency of nodes with rain-bearing circulation types decreased during the drought; (b) the amount of rain falling on days that did have rain-bearing circulation types was reduced, especially in the shoulder seasons (March–May and August–October); (c) the rainfall reduction was also associated with anomalously low moisture transport, and convective energy (CAPE), over SWC. These results add to the existing knowledge of drivers of the Cape Town drought, providing an understanding of underlying synoptic processes
A low inflammatory, Langerhans cell-targeted microprojection patch to deliver ovalbumin to the epidermis of mouse skin
In a low inflammatory skin environment, Langerhans cells (LCs) - but not dermal dendritic cells (dDCs) - contribute to the pivotal process of tolerance induction. Thus LCs are a target for specific-tolerance therapies. LCs reside just below the stratum corneum, within the skin's viable epidermis. One way to precisely deliver immunotherapies to LCs while remaining minimally invasive is with a skin delivery device such as a microprojection arrays (MPA). Today's MPAs currently achieve rapid delivery (e.g. within minutes of application), but are focussed primarily at delivery of therapeutics to the dermis, deeper within the skin. Indeed, no MPA currently delivers specifically to the epidermal LCs of mouse skin. Without any convenient, pre-clinical device available, advancement of LC-targeted therapies has been limited. In this study, we designed and tested a novel MPA that delivers ovalbumin to the mouse epidermis (eMPA) while maintaining a low, local inflammatory response (as defined by low erythema after 24 h). In comparison to available dermal-targeted MPAs (dMPA), only eMPAs with larger projection tip surface areas achieved shallow epidermal penetration at a low application energy. The eMPA characterised here induced significantly less erythema after 24 h (p = 0.0004), less epidermal swelling after 72 h (p
From movement purpose to perceptive spatial mobility prediction
A major limiting factor for prediction algorithms is the forecast of new or never before-visited locations. Conventional personal models utterly relying on personal location data perform poorly when it comes to discoveries of new regions. The reason is explained by the prediction relying only on previously visited/seen (or known) locations. As a side effect, locations that were never visited before (or explorations) by a user cause disturbance to known location's prediction. Besides, such explorations cannot be accurately predicted. We claim the tackling of such limitation first requires identifying the purpose of the next probable movement. In this context, we propose a novel framework for adjusting prediction resolution when probable explorations are going to happen. As recently demonstrated [3, 15], there exist regularities in returning and exploring visits. Moreover, the geographical occurrences of explorations are far from being random in a coarser-grained spatial resolution. Exploiting these properties, instead of directly predicting a user's next location, we design a two-step predictive framework. First, we infer an individual's next type of transition: (i) a return, i.e., a visit to a previously known location, or (ii) an exploration, i.e., a discovery of a new place. Next, we predict the next location or the next coarse-grained zone depending on the inferred type of movement. We conduct extensive experiments on three real-world GPS mobility traces. The results demonstrate substantial improvements in the accuracy of prediction by dint of fruitfully forecasting coarse-grained zones used for exploration activities. To the best of our knowledge, we are the first to propose a framework solely based on personal location data to tackle the prediction of visits to new places.Accepted manuscrip
Assessment of recycled glass and expanded clay in a dual media configuration for drinking water treatment
Lamb wave mode spectroscopy on complex structures with amplitude-based feature detection
The need for fast and effective Non-Destructive Testing (NDT) techniques is ever present. Existing techniques such as ultrasonic testing, whilst established and reliable, face many limitations when considering large structures such as those found in the aerospace and green energy sectors. Wave mode, as well as other wavenumber based filtering techniques have been presented to address many of these limitations. This work describes a novel application of Wave Mode Spectroscopy (WMS) along with feature detection for complex geometric shapes. The specimen's geometry is found during the wavefields measurement through the use of a 3D Scanning Laser Doppler Vibrometer (SLDV) allowing the wavefield to be mapped to a 2D plane with limited distortion of the wavelength and without any prior knowledge of the part's geometry. This was shown to allow WMS to be applied to continuous, multi-frequency wavefields and generate accurate thickness maps. Monogenic signal analysis has been applied to the same measurement data to generate amplitude maps that allow the automatic detection of edge features through the use of a Canny edge detection algorithm
When is policing fair? Groups, identity and judgements of the procedural justice of coercive crowd policing
Procedural justice theory (PJT) is now a widely utilised theoretical perspective in policing research that acknowledges the centrality of police ‘fairness’. Despite its widespread acceptance this paper asserts that there are conceptual limitations that emerge when applying the theory to the policing of crowd events. This paper contends that this problem with PJT is a result of specific assumptions that are highlighted by two studies using a novel experimental approach. Study 1 systematically manipulated the social categories used to describe crowd participants subjected to police coercion. The experiment demonstrates how these social categories dramatically affected participants’ perceptions of the same police action and that it was participants’ relational identification with the police, rather than a superordinate category, that mediated the association between judgements of procedural fairness and intentions to cooperate. In Study 2, using a quasi-experimental design, we then replicated and extended these findings by demonstrating how perceptions of procedural fairness are also influenced by levels of in-group identification. The paper concludes by exploring the implications of the data for reconceptualising the social psychological processes mediating these judgements and impacts of police legitimacy
A Glass Polyalkenoate Cement Carrier for Bone Morphogenetic Proteins
This work considers a glass polyalkenoate cement (GPC)-based carrier for the effective delivery of bone morphogenetic proteins (BMPs) at an implantation site. A 0.12 CaO–0.04 SrO–0.36 ZnO–0.48 SiO2 based glass and poly(acrylic acid) (PAA, Mw 213,000) were employed for the fabrication of the GPC. The media used for the water source in the GPC reaction was altered to produce a series of GPCs. The GPC liquid media was either 100 % distilled water with additions of albumin at 0, 2, 5 and 8 wt% of the glass content, 100 % formulation buffer (IFB), and 100 % BMP (150 µg rhBMP-2/ml IFB). Rheological properties, compressive strength, ion release profiles and BMP release were evaluated. Working times (Tw) of the formulated GPCs significantly increased with the addition of 2 % albumin and remained constant with further increases in albumin content or IFB solutions. Setting time (Ts) experienced an increase with 2 and 5 % albumin content, but a decrease with 8 % albumin. Changing the liquid source to IFB containing 5 % albumin had no significant effect on Ts compared to the 8 % albumin-containing BT101. Replacing the albumin with IFB/BMP-2 did not significantly affect Tw. However, Ts increased for the BT101_BMP-2 containing GPCs, compared to all other samples. The compressive strength evaluated 1 day post cement mixing was not affected significantly by the incorporation of BMPs, but the ion release did increase from the cements, particularly for Zn and Sr. The GPCs released BMP after the first day, which decreased in content during the following 6 days. This study has proven that BMPs can be immobilized into GPCs and may result in novel materials for clinical applications
A new method for quantifying anisotropic martensitic transformation strains accumulated during constrained cooling
Martensitic phase transformations during welding can play a major role in determining the final residual stresses and they can be anisotropic if the transformation occurs under stress. Traditionally, the Satoh test has been used to quantify the response, but it suffers from the fact that the temperature is not uniform along the specimen length, making it difficult to interpret the data. This shortcoming is overcome in our new experimental method using digital image correlation (DIC) to quantify the temperature dependent evolution of the transformation strain locally both parallel and perpendicular to an applied load, in this case for a high-strength low alloy (HSLA) steel and a tough, low transformation temperature weld consumable designed to mitigate tensile weld residual stresses. The method is able to separate the volumetric component of the transformation strain from the deviatoric transformation plasticity component. The volumetric component is shown to be independent of applied load, while the deviatoric component varies approximately linearly with applied load. For the HSLA steel studied here the method also reveals that the transformation start temperature rises under both tensile and compressive loading, confirming previous work. From a weld modelling viewpoint our method provides sufficient information to include the stress dependency of the anisotropic transformation strain in numerical finite element models of the weld process
- …