173 research outputs found
Thermal Sprayed Coatings Used Against Corrosion and Corrosive Wear
International audienceCoatings have historically been developed to provide protection against corrosion and erosion that is to protect the material from chemical and physical interaction with its environment. Corrosion and wear problems are still of great relevance in a wide range of industrial applications and products as they result in the degradation and eventual failure of components and systems both in the processing and manufacturing industries and in the service life of many components. Various technologies can be used to deposit the appropriate surface protection that can resist under specific conditions. They are usually distinguished by coating thickness: deposition of thin films (below 10 to 20 μm according to authors) and deposition of thick films. The latter, mostly produced at atmospheric pressure have a thickness over 30 μm, up to several millimeters and are used when the functional performance and life of component depend on the protective layer thickness. Both coating technology can also be divided into two distinct categories: "wet" and " dry " coating methods, the crucial difference being the medium in which the deposited material is processed. The former group mainly involves electroplating, electroless plating and hot-dip galvanizing while the second includes, among others methods, vapor deposition, thermal spray techniques, brazing, or weld overlays. This chapter deals with coatings deposited by thermal spraying. It is defined by Hermanek (2001) as follows , "Thermal spraying comprises a group of coating processes in which finely divided metallic or non-metallic materials are deposited in a molten or semi-molten condition to form a coating". The processes comprise: direct current (d.c.) arcs or radio frequency (r.f.) discharges-generated plasmas, plasma transferred arcs (PTA), wire arcs, flames, high velocity oxy-fuel flames (HVOF), high velocity air-fuel flames (HVAF), detonation guns (D-gun). Another spray technology has emerged recently ; it is called cold gas-dynamic spray technology, or Cold Spray (CS). It is not really a thermal spray technology as the high energy gas flow is produced by a compressed relatively cold gas (T < 800°C) expanding in a nozzle and will not be included in this presentation
Solution and Suspension Plasma Spraying of Nanostructure Coatings
International audienceThe main motivation for coating industrial parts with a different material lies on the following needs: (1) to improve functional performance, (2) to improve the component life by reducing wear due to abrasion, erosion and/or corrosion, (3) to extend the component life by rebuilding the worn part to its original dimensions, and (4) to improve the functionality of a low-cost material by coating it with a high performance but more expensive coating. Coating technologies can be roughly divided into thin- and thick- film technologies. Thin films, with thickness of less than 20 μm can be produced by dry coating processes like Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD); they offer excellent enhancement of surface properties and are for example used in optical and electronic device and cutting tools, Davis J.R. (2004). However, most of these thin-film technologies require a reduced pressure environment and, therefore, are more expensive with a limit on the size and shape of the substrate. Thick films have a thickness over 20 μm and can be several millimeters thick. They are required when the functional performance depends on the layer thickness, e.g. in thermal barrier coatings, when high erosion and corrosion conditions result in wear and the component life depends on the layer thickness, or when the original dimensions of worn parts have to be restored. Thick film deposition methods include chemical/electro-chemical plating, brazing, weld overlays, and thermal spray. Thermal spray processes, Davis J.R. (2004), are well-established surface treatments aiming at forming a coating by stacking of lamellae resulting from impact, flattening and solidification of impinging molten particles. "Thermal spraying comprises a group of coating processes in which finely divided metallic or non-metallic materials are deposited in a molten or semi-molten condition to form a coating. The coating material may be in the form of powder, ceramic rod, wire or molten materials, Hermanek, F.J. (2001).
INFLUENCE OF HEAT AND MOMENTUM TRANSFERS BETWEEN THERMAL PLASMA JETS AND STABILIZED ZIRCONIA PARTICULATES ON THE THERMOMECHANICAL PROPERTIES OF THE RESULTING COATINGS
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF POWDER VAPORIZATION UNDER THERMAL PLASMA CONDITIONS
The 2017 Plasma Roadmap: Low temperature plasma science and technology
Journal of Physics D: Applied Physics published the first Plasma Roadmap in 2012 consisting of the individual perspectives of 16 leading experts in the various sub-fields of low temperature plasma science and technology. The 2017 Plasma Roadmap is the first update of a planned series of periodic updates of the Plasma Roadmap. The continuously growing interdisciplinary nature of the low temperature plasma field and its equally broad range of applications are making it increasingly difficult to identify major challenges that encompass all of the many sub-fields and applications. This intellectual diversity is ultimately a strength of the field. The current state of the art for the 19 sub-fields addressed in this roadmap demonstrates the enviable track record of the low temperature plasma field in the development of plasmas as an enabling technology for a vast range of technologies that underpin our modern society. At the same time, the many important scientific and technological challenges shared in this roadmap show that the path forward is not only scientifically rich but has the potential to make wide and far reaching contributions to many societal challenges.I Adamovich et al 2017 J. Phys. D: Appl. Phys. 50 32300
An overview of using small punch testing for mechanical characterization of MCrAlY bond coats
Considerable work has been carried out on overlay bond coats in the past several decades because of its excellent oxidation resistance and good adhesion between the top coat and superalloy substrate in the thermal barrier coating systems. Previous studies mainly focus on oxidation and diffusion behavior of these coatings. However, the mechanical behavior and the dominant fracture and deformation mechanisms of the overlay bond coats at different temperatures are still under investigation. Direct comparison between individual studies has not yet been achieved due to the fragmentary data on deposition processes, microstructure and, more apparently, the difficulty in accurately measuring the mechanical properties of thin coatings. One of the miniaturized specimen testing methods, small punch testing, appears to have the potential to provide such mechanical property measurements for thin coatings. The purpose of this paper is to give an overview of using small punch testing to evaluate material properties and to summarize the available mechanical properties that include the ductile-to-brittle transition and creep of MCrAlY bond coat alloys, in an attempt to understand the mechanical behavior of MCrAlY coatings over a broad temperature range
- …