FeNi-based magnetoimpedance multilayers: Tailoring of the softness by magnetic spacers

The microstructure and magnetic properties of sputtered permalloy films and FeNi(170 nm)/X/FeNi(170 nm) (X=Co, Fe, Gd, Gd-Co) sandwiches were studied. Laminating of the thick FeNi film with various spacers was done in order to control the magnetic softness of FeNi-based multilayers. In contrast to the Co and Fe spacers, Gd and Gd-Co magnetic spacers improved the softness of the FeNi/X/FeNi sandwiches. The magnetoimpedance responses were measured for [FeNi/Ti(6 nm)] 2/FeNi and [FeNi/Gd(2 nm)] 2/FeNi multilayers in a frequency range of 1-500 MHz: for all frequencies under consideration the highest magnetoimpedance variation was observed for [FeNi/Gd(2 nm)] 2/FeNi multilayers. © 2012 American Institute of Physics

Giant magnetoimpedance of FeNi-based nanostructures deposited onto glass and flexible substrates

This work was supported in part by the Basque Government through the Actimat Project under Grant IE13-380

Features of the magnetic properties of Co/Si/Co thin-film systems

The magnetic properties of Co/Si/Co thin-film structures grown by magnetron sputtering have been studied using magnetooptical techniques. It is established that the saturation field (H S) of trilayers exhibits oscillations as a function of the thickness of the semiconductor (silicon) interlayer. This behavior is explained by structural features of the Co/Si/Co system and the presence of antiferromagnetic exchange coupling between magnetic layers via the silicon interlayer. © 2013 Pleiades Publishing, Ltd

Angular dependence of the ferromagnetic resonance parameters of [Ti/FeNi]6/Ti/Cu/Ti/[FeNi/Ti]6 nanostructured multilayered elements in the wide frequency range

Magnetically soft [Ti(6)/FeNi(50)]6/Ti(6)/Cu(500)/Ti(6)/[FeNi(50)/Ti(6)]6 nanostructured multilayered elements were deposited by rf-sputtering technique in the shape of elongated stripes. The easy magnetization axis was oriented along the short size of the stripe using deposition in the external magnetic field. Such configuration is important for the development of small magnetic field sensors employing giant magnetoimpedance effect (GMI) for different applications. Microwave absorption of electromagnetic radiation was experimentally and theoretically studied in order to provide an as complete as possible high frequency characterization. The conductor-backed coplanar line was used for microwave properties investigation. The medialization for the precession of the magnetization vector in the uniformly magnetized GMI element was done on the basis of the Landau–Lifshitz equation with a dissipative Bloch–Bloembergen term. We applied the method of the complex amplitude for the analysis of the rotation of the ferromagnetic GMI element in the external magnetic field. The calculated and experimental dependences for the amplitudes of the imaginary part of the magnetic susceptibility tensor x-component and magnetoabsorption related to different angles show a good agreement. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.Russian Science Foundation, RSF: 18-19-00090Funding: This research was funded by the Russian Science Foundation, grant number 18-19-00090

Structural and magnetic properties of Ni0.8Fe0.2/Ti nanoscale multilayers

The influence of the thickness of the Ni0.8Fe0.2 (Permalloy, Py) layers on the structural and magnetic properties of magnetron sputtered Py/Ti multilayers was studied. The thickness of the Py layers was varied in the interval of 8 to 30 Å. X-ray reflectivity scans evidence the existence of a well-defined layered structure in all the samples considered, but also the presence of a complex intermixed interface. The shape of both the temperature dependence of magnetization and the hysteresis loops of the multilayered structures depends strongly on Py thickness. Magnetic and reflectivity measurements were comparatively analyzed in order to better understand the structure of the samples, and specifically, their interfaces. In particular, the presence of small superparamagnetic Py at the interfaces of the samples, especially evident in the samples with the thinnest Py layers, seems confirmed by the magnetic measurements, agreeing well with the reflectivity results. © 2018 by the authors.1 Instituto Regional de Investigación Científica Aplicada (IRICA) and Departamento de Física Aplicada, Universidad de Castilla-La Mancha, 13071 Ciudad Real, Spain; [email protected] (J.A.G.); [email protected] (J.P.A.) 2 Department of Solid State Magnetism, Institute of Natural Sciences and Mathematics, Ural Federal University, 620002 Ekaterinburg, Russia; [email protected] (A.V.S.); [email protected] (G.V.K.) 3 Departamento de Electricidad y Electrónica, Universidad del País Vasco (UPV/EHU), 48080 Bilbao, SpainFunding: The research was supported by the Ministry of Education and Science of the Russian Federation (Agreement no. 02.A03.21.0006) and by the Spanish projects MAT2014-58034-R (MINECO/AEI/FEDER, EU) and PEII-2014-042-P (JCCM/FEDER, EU)

Structure and magnetic properties of FeNi/Ti sputtered multilayers

The microstructure, anisotropic magnetoresistance, magnetic properties and magnetic domain structure of sputtered FeNi films and [Ti/FeNi]n (n = 2-16) multilayers were comparatively analyzed. It was found that although the grain size increases with an increase of the FeNi thickness both in the case of FeNi films and [Ti/FeNi]n multilayers, it did not exceed 25 nm. The values of anisotropic magnetoresistance for FeNi films and [Ti/FeNi]n multilayers were close to each other showing a weak dependence on the total thickness of the multilayered structure. Coercivity for multilayers was found to be smaller than the coercivity of single layer FeNi films. Despite the absence of a direct exchange interaction between FeNi neighboring layers in the [Ti/FeNi]n structures, their domain structures were found to be quite different from magnetic domains in single layer films due to stray field compensation in the multilayers. Obtained results are useful for the development of sensitive elements for small magnetic field detectors and planar inductors. © 2013 Owned by the authors, published by EDP Sciences

Co/Cu/Co pseudo spin-valve system prepared by magnetron sputtering with different argon pressure

Thin Co films were fabricated by DC magnetron sputtering. The effect of argon pressure on the microstructure, surface morphology and magnetic properties of the samples was systematically studied. It was found that with the increase of argon pressure, the sharpness of the crystalline texture of the samples declines, the roughness of film surfaces and the coercivity of the films increase. Based on these results, a Co/Cu/Co pseudo spin-valve system was designed and the corresponding structures were fabricated. The difference in coercivity of magnetic layers was obtained by deposition of the Co layers at different Ar pressures. Change of the resistance of this trilayer is induced at a moderate field by the spin rotation in the soft layer with lower coercivity. © 2015 Trans Tech Publications, Switzerland