437 research outputs found

    Battery choice and management for New Generation Electric Vehicles

    Get PDF
    Different types of electric vehicles (EVs) have been recently designed with the aim of solving pollution problems caused by the emission of gasoline-powered engines. Environmental problems promote the adoption of new-generation electric vehicles for urban transportation. As it is well known, one of the weakest points of electric vehicles is the battery system. Vehicle autonomy and, therefore, accurate detection of battery state of charge (SoC) together with battery expected life, i.e., battery state of health, are among the major drawbacks that prevent the introduction of electric vehicles in the consumer market. The electric scooter may provide the most feasible opportunity among EVs. They may be a replacement product for the primary-use vehicle, especially in Europe and Asia, provided that drive performance, safety, and cost issues are similar to actual engine scooters. The battery system choice is a crucial item, and thanks to an increasing emphasis on vehicle range and performance, the Li-ion battery could become a viable candidate. This paper deals with the design of a battery pack based on Li-ion technology for a prototype electric scooter with high performance and autonomy. The adopted battery system is composed of a suitable number of cells series connected, featuring a high voltage level. Therefore, cell equalization and monitoring need to be provided. Due to manufacturing asymmetries, charge and discharge cycles lead to cell unbalancing, reducing battery capacity and, depending on cell type, causing safety troubles or strongly limiting the storage capacity of the full pack. No solution is available on the market at a cheap price, because of the required voltage level and performance, therefore, a dedicated battery management system was designed, that also includes a battery SoC monitoring. The proposed solution features a high capability of energy storing in braking conditions, charge equalization, overvoltage and undervoltage protection and, obviously, SoC information in order to optimize autonomy instead of performance or vice-versa

    Impact of climate change and urban development on the flora of a southern European city: analysis of biodiversity change over a 120-year period

    Get PDF
    Ecological studies in cities are not only aimed at investigating floristic diversity, but also represent informative test cases for understanding ecological system dynamics and responses to urban and climate changes since cities represent microcosms of environmental changes happening globally. The city of Bologna was selected as a case study since two specific and complete studies have been carried out in a 120-years timespan, one in 1894 and one in 2018. Since 1894, a large increase occurred in the number of taxa (families from 41 to 101, species from 176 to 477) and alien species (from 22 to 144), with a 65% total species turnover. The comparison of species life forms pointed out a noticeable recent expansion of phanerophytes and geophytes at the expense of therophytes and hemicryptophytes. The correlation between urbanistic features and plant richness indicated that the main factor affecting plant richness is the presence of green spaces (parks, tree lines, flowerbeds, etc.). Analysis of variation in Ellenberg\u2019s indicator values over the last 120 years evidenced a shift toward shade-tolerant species, mainly connected to the increased presence of parks and trees within the city. Climate change and the presence of artificially irrigated areas within the city has led to an increase in both hygrophilous and drought-resistant species. In particular, the temperature index showed a significantly higher amount of macrothermal species in accordance with a warmer climate and the urban heat island effect

    Inhibition of the ethylene response by 1-MCP in tomato suggests that polyamines are not involved in delaying ripening, but may moderate the rate of ripening or over-ripening

    Get PDF
    Ethylene initiates the ripening and senescence of climacteric fruit, whereas polyamines have been considered as senescence inhibitors. Ethylene and polyamine biosynthetic pathways share S-adenosylmethionine as a common intermediate. The effects of 1-methylcyclopropene (1-MCP), an inhibitor of ethylene perception, on ethylene and polyamine metabolism and associated gene expression was investigated during ripening of the model climacteric fruit, tomato (Solanum lycopersicum L.), to determine whether its effect could be via polyamines as well as through a direct effect on ethylene. 1-MCP delayed ripening for 8 d compared with control fruit, similarly delaying ethylene production and the expression of 1-aminocyclopropane- 1-carboxylic acid (ACC)-synthase and some ethylene receptor genes, but not that of ACC oxidase. The expression of ethylene receptor genes returned as ripening was reinitiated. Free putrescine contents remained low while ripening was inhibited by 1-MCP, but increased when the fruit started to ripen; bound putrescine contents were lower. The activity of the putrescine biosynthetic enzyme, arginine decarboxylase, was higher in 1-MCP-treated fruit. Activity of S-adenosylmethionine-decarboxylase peaked at the same time as putrescine levels in control and treated fruit. Gene expression for arginine decarboxylase peaked early in non-treated fruit and coincident with the delayed peak in putrescine in treated fruit. A coincident peak in the gene expression for arginase, S-adenosylmethionine-decarboxylase, and spermidine and spermine synthases was also seen in treated fruit. No effect of treatment on ornithine decarboxylase activity was detected. Polyamines are thus not directly associated with a delay in tomato fruit ripening, but may prolong the fully-ripe stage before the fruit tissues undergo senescence

    Ethnobotanical Review and Dataset Compiling on Wild and Cultivated Plants Traditionally Used as Medicinal Remedies in Italy

    Get PDF
    Over the centuries, wild plants have constituted the main food ingredients and traditional medicine in rural communities. In the last decades, thousands of ethnobotanical studies have been conducted, with the aim of documenting the traditional knowledge on wild and cultivated plants both for food and therapeutic purposes. In the present work, 75 published papers related to Italian ethnobotanical knowledge on wild and cultivated plants traditionally used for medical purposes were analyzed and data on 1117 different species organized in the first dataset to target medicinal applications only. For each plant species, the Italian region of use, plant organs, mode of preparation, specific pathological group of application, citation index, and use index were listed. The different therapeutic applications were subdivided into nine main pathological groups according to the targeted human apparatus. Overall, the cited species with highest number of uses were related to the treatment of the digestive system and skin-ears-eyes-hair diseases, followed by diseases of the genito-urinary and respiratory systems. The 13 most relevant species were identified on the basis of their citation and use indexes. The present review on Italian medicinal flora aims to provide valuable information on wild and cultivated species, which are potential sources of plant-based therapeutic remedies, to preserve and reevaluate endangered traditional folk knowledge

    Phytoextraction of arsenic, nickel, selenium and zinc from sewage sludge: from laboratory to pilot scale

    Get PDF
    Aims The present study aimed at: (i) verifying the suitability of pure sewage sludge (SS) as growing medium for the hyperaccumulator species (Pteris vittata, Odontarrhena chalcidica, Astragalus bisulcatus and Noccaea caerulescens); (ii) evaluating the removal of As, Ni, Se and Zn operated by the chosen species; (iii) estimating the potential metal yields (bio-ore production) and connected monetary rewards in a small-scale field experiment. Methods Hyperaccumulator plants were first tested under controlled conditions, on three different SS (P1, P2, P3) characterized by the presence of one or more contaminants among As, Ni, Se and Zn. P1 sludge was then chosen for a small-scale field experiment. Hyperaccumulator seedlings were transferred on SS and cultivated for 16 weeks before harvesting. Results All hyperaccumulator species grew healthy on P1 SS, with A. bisulcatus and O. chalcidica reaching an average biomass of 40.2 and 21.5 g DW/plant. Trace metal concentrations in aerial parts were: As (P. vittata) 380 mg/kg DW, Ni (O. chalcidica) 683 mg/kg DW, Se (A. bisulcatus) 165 mg/kg DW, Zn (N. caerulescens) 461 mg/kg DW. The total removal of As, Ni, Se and Zn from SS due to phytoextraction was 5.8, 19, 18, 29% respectively. Conclusions This study demonstrated that phytoextraction can be applied to SS for the removal contaminants while recovering valuable metals. Se and As were identified as the most promising target element, while Ni and Zn removal was poorly efficient under the present experimental conditions

    Induction of hormesis in plants by urban trace metal pollution

    Get PDF
    Hormesis is a dose–response phenomenon observed in numerous living organisms, caused by low levels of a large number of stressors, among which metal ions. In cities, metal levels are usually below toxicity limits for most plant species, however, it is of primary importance to understand whether urban metal pollution can threaten plant survival, or, conversely, be beneficial by triggering hormesis. The effects of Cd, Cr and Pb urban concentrations were tested in hydroponics on three annual plants, Cardamine hirsuta L., Poa annua L. and Stellaria media (L.) Vill., commonly growing in cities. Results highlighted for the first time that average urban trace metal concentrations do not hinder plant growth but cause instead hormesis, leading to a considerable increase in plant performance (e.g., two to five-fold higher shoot biomass with Cd and Cr). The present findings, show that city habitats are more suitable for plants than previously assumed, and that what is generally considered to be detrimental to plants, such as trace metals, could instead be exactly the plus factor allowing urban plants to thrive

    Phytochemicals Recovery from Grape Pomace: Extraction Improvement and Chemometric Study

    Get PDF
    In the last 20 years, an increased interest has been shown in the application of different types and combinations of enzymes to obtain phenolic extracts from grape pomace in order to maximize its valorization. Within this framework, the present study aims at improving the recovery of phenolic compounds from Merlot and Garganega pomace and at contributing to the scientific background of enzyme-assisted extraction. Five commercial cellulolytic enzymes were tested in different conditions. Phenolic compound extraction yields were analyzed via a Design of Experiments (DoE) methodology and a second extraction step with acetone was sequentially added. According to DoE, 2% w/w enzyme/substrate ratio was more effective than 1%, allowing a higher total phenol recovery, while the effect of incubation time (2 or 4 h) variation was more enzyme-dependent. Extracts were characterized via spectrophotometric and HPLC-DAD analyses. The results proved that enzymatic and acetone Merlot and Garganega pomace extracts were complex mixtures of compounds. The use of different cellulolytic enzymes led to different extract compositions, as demonstrated using PCA models. The enzyme effects were observed both in water enzymatic and in the subsequent acetone extracts, probably due to their specific grape cell wall degradation and leading to the recovery of different molecule arrays

    Advances in combined enzymatic extraction of ferulic acid from wheat bran

    Get PDF
    Wheat bran could be utilised as feedstock for innovative and sustainable biorefinery processes. Here, an enzymatic hydrolysis process for ferulic acid (FA) extraction was optimised step by step for total wheat bran (Tritello) and then also applied to the outer bran layer (Bran 1). Proteins, reducing sugars, total phenols and FA were quantified. The highest FA yields (0.82-1.05\u202fg/kg bran) were obtained either by rehydrating the bran by autoclaving (Tritello) or by steam explosion (Bran 1) using a bran/water ratio of 1:20, followed by enzymatic pre-treatment with Alcalase and Termamyl, to remove protein and sugars, and a final enzymatic hydrolysis with Pentopan and feruloyl esterase to solubilise phenol. FA was recovered from the final digestate via solid phase extraction. A 40-fold scale-up was also performed and the release of compounds along all the process steps and at increasing incubation times was monitored. Results showed that FA was initially present at a minimum level while it was specifically released during the enzymatic treatment. In the final optimized process, the FA extraction yield was higher than that obtained with NaOH control hydrolysis while, in comparison with other FA enzymatic extraction methods, fewer process steps were required and no buffers, strong acid/alkali nor toxic compounds were used. Furthermore, the proposed process may be easily scaled-up, confirming the feasibility of wheat bran valorisation by biorefinery processes to obtain valuable compounds having several areas of potential industrial exploitation

    Enzymatic digestion of calf fleshing meat by-products: Antioxidant and anti-tyrosinase activity of protein hydrolysates, and identification of fatty acids

    Get PDF
    open7noThis research was funded by Italian Ministry of Education, University and Research, National Project Cluster Agrifood SO.FI.A. (SOstenibilità della FIliera Agroalimentare) (2013–2017, Grant Number CTN01_00230_450760).The food waste reduction through an efficient recovery of its valuable building molecules has become an important topic with a positive effect on the economy and the environment. In this work, the revalorization of slaughterhouse calf fleshing meat through its enzymatic hydrolysis is proposed. The proteolytic activity of 11 enzymes was initially screened and the four most efficient enzymes (papain, trypsin, pancreatin, and bromelain) were selected. The molecular profiling of the different protein/peptide fractions by the Linear Trap Quadrupole-OrbiTrap technique showed compositional differences due to the specificity of the enzymes’ cleavage sites. In order to find a potential reuse of these hydrolysates, the analysis of antioxidant and, for the first time on fleshing meat hydrolysates, of anti-tyrosinase activities, was performed. Papain-digested samples were those showing the highest inhibition activity of tyrosinase enzyme (55.6%) as well as the highest antioxidant activity (3.52 g TEAC/L). In addition, the composition analysis of the lipid fraction was performed. The mono-unsaturated fatty acids resulted to be the most abundant lipid in all the samples with the exception of pancreatin-treated hydrolysates in which poly-unsaturated fatty acids were predominant. The present results seemed to support a possible valorization of isolated fractions from calf fleshing by-products, as food or feed ingredients, by the implementation of fraction isolation within the meat-processing pipeline.openTedeschi T.; Anzani C.; Ferri M.; Marzocchi S.; Caboni M.F.; Monari S.; Tassoni A.Tedeschi T.; Anzani C.; Ferri M.; Marzocchi S.; Caboni M.F.; Monari S.; Tassoni A
    • …
    corecore