SecureMEMS: Selective Deposition of Energetic Materials

There exists a pressing operational need to secure and control access to high-valued electromechanical systems, and in some cases render them inoperable. Developing a reliable method for depositing energetic materials will allow for the near-seamless integration of electromechanical systems and energetic material, and, in turn, provide the pathway for security and selective destruction that is needed. In this work, piezoelectric inkjet printing was used to selectively deposit energetic materials. Nanothermites, comprising of nanoscale aluminum and nanoscale copper oxide suspended in dimethyl-formamide (DMF), were printed onto silicon wafers, which enabled both thermal and thrust measurements of the decomposing energetic material. Various solids loadings were studied in order to optimize printing characteristics. Going forward, further studies will focus on the plausibility of inkjet printing other energetic materials for the purposes of the degradation of electromechanical systems

The Influence of the effect of solute on the thermodynamic driving force on grain refinement of Al alloys

Grain refinement is known to be strongly affected by the solute in cast alloys. Addition of some solute can reduce grain size considerably while others have a limited effect. This is usually attributed to the constitutional supercooling which is quantified by the growth restriction factor, Q. However, one factor that has not been considered is whether different solutes have differing effects on the thermodynamic driving force for solidification. This paper reveals that addition of solute reduces the driving force for solidification for a given undercooling, and that for a particular Q value, it is reduced more substantially when adding eutectic-forming solutes than peritectic-forming elements. Therefore, compared with the eutectic-forming solutes, addition of peritectic-forming solutes into Al alloys not only possesses a higher initial nucleation rate resulted from the larger thermodynamic driving force for solidification, but also promotes nucleation within the constitutionally supercooled zone during growth. As subsequent nucleation can occur at smaller constitutional supercoolings for peritectic-forming elements, a smaller grain size is thus produced. The very small constitutional supercooling required to trigger subsequent nucleation in alloys containing Ti is considered as a major contributor to its extraordinary grain refining efficiency in cast Al alloys even without the deliberate addition of inoculants.The Australian Research Council (ARC DP10955737)

Comparative fruit quality parameters of ‘Ninfa’ apricot (Prunus armeniaca L.) grafted on two different rootstocks in a newly established organic orchard

The fruit quality parameters of Prunus armeniaca L. cv ‘Ninfa’ grafted on ‘Myrobalan 29C’ (Prunus cerasifera Ehrh.) and ‘Real Fino’ apricot seedling (Prunus armeniaca L.) were analysed in an experimental orchard under organic management. The study was performed between 2010 and 2012 in the province of Seville (SW Spain). Colour, fruit and stone weights, firmness, soluble solid concentration, and acidity were measured for fruit quality evaluation. Trunk cross-sectional area, main branches, and fruit yield were also determined. In general, ‘Myrobalan 29C’ rootstock produced fruit slightly larger in size and with a bigger weight. By contrast, apricots on ‘Myrobalan 29C’ had less firmness and a lower solid soluble concentration than on ‘Real Fino’. There was little difference in the colour, acidity, and stone dry weights. Trees on ‘Real Fino’ had larger areas of trunk and branches but no significant differences were obtained in relation to fruit yields

The value of ischemia-modified albumin compared with d-dimer in the diagnosis of pulmonary embolism

<p>Abstract</p> <p>Study objective</p> <p>The primary aim of this study was to investigate whether IMA levels are helpful in the diagnosis of pulmonary embolism (PE). The secondary aim was to determine whether IMA was more effective alone or in combination with clinical probability scores in the diagnosis of PE. Thirdly, the sensitivity and specificity of IMA is compared with D-dimer both with and without clinical probability scores in patients with suspected PE.</p> <p>Methods</p> <p>Consecutive patients presenting to the emergency department with suspected PE were prospectively recruited, and healthy volunteers were also enrolled as controls. D-dimer and IMA levels were measured for the entire study group. Wells and Geneva scores were calculated and s-CTPA was performed on all suspected PE patients.</p> <p>Results</p> <p>The study population consisted of 130 patients with suspected PE and 59 healthy controls. Mean IMA levels were 0.362 ± 0.11 ABSU for Group A, the PE group (n = 75); 0.265 ± 0.07 ABSU for Group B, the non-PE group (n = 55); and 0.175 ± 0.05 ABSU for Group C, the healthy control group (p < 0.0001). At a cut-off point of 0.25 ABSU, IMA was 93% sensitive and 75% specific in the diagnosis of PE. PPV was 79.4% and NPV was 78.6%. Mean D-dimer levels were 12.48 ± 10.88 μg/ml for Group A; 5.36 ± 7.80 μg/ml for Group B and 0.36 ± 0.16 μg/ml for Group C (p < 0.0001). The D-dimer cut-off point was 0.81 μg/ml with a sensitivity of 98.9% and a specificity of 62.7%, PPV of 69.4% and NPV of 83.3%. The use of IMA in combination with Wells and Geneva clinical probability scores was determined to have a positive impact on these scores' sensitivity and negative predictive values.</p> <p>Conclusion</p> <p>IMA is a good alternative to D-dimer in PE diagnosis in terms of both cost and efficiency. Used in combination with clinical probability scores, it has a similar positive effect on NPV and sensitivity to that of D-dimer. The PPV of IMA is better than D-dimer, but it is still unable to confirm a diagnosis of PE without additional investigation.</p

Basal Ganglia Pathways Associated With Therapeutic Pallidal Deep Brain Stimulation for Tourette Syndrome

BACKGROUND: Deep brain stimulation (DBS) targeting the globus pallidus internus (GPi) can improve tics and comorbid obsessive-compulsive behavior (OCB) in patients with treatment-refractory Tourette syndrome (TS). However, some patients’ symptoms remain unresponsive, the stimulation applied across patients is variable, and the mechanisms underlying improvement are unclear. Identifying the fiber pathways surrounding the GPi that are associated with improvement could provide mechanistic insight and refine targeting strategies to improve outcomes. METHODS: Retrospective data were collected for 35 patients who underwent bilateral GPi DBS for TS. Computational models of fiber tract activation were constructed using patient-specific lead locations and stimulation settings to evaluate the effects of DBS on basal ganglia pathways and the internal capsule. We first evaluated the relationship between activation of individual pathways and symptom improvement. Next, linear mixed-effects models with combinations of pathways and clinical variables were compared in order to identify the best-fit predictive models of tic and OCB improvement. RESULTS: The best-fit model of tic improvement included baseline severity and the associative pallido-subthalamic pathway. The best-fit model of OCB improvement included baseline severity and the sensorimotor pallidosubthalamic pathway, with substantial evidence also supporting the involvement of the prefrontal, motor, and premotor internal capsule pathways. The best-fit models of tic and OCB improvement predicted outcomes across the cohort and in cross-validation. CONCLUSIONS: Differences in fiber pathway activation likely contribute to variable outcomes of DBS for TS. Computational models of pathway activation could be used to develop novel approaches for preoperative targeting and selecting stimulation parameters to improve patient outcomes

Automatic Tumor-Stroma Separation in Fluorescence TMAs Enables the Quantitative High-Throughput Analysis of Multiple Cancer Biomarkers

The upcoming quantification and automation in biomarker based histological tumor evaluation will require computational methods capable of automatically identifying tumor areas and differentiating them from the stroma. As no single generally applicable tumor biomarker is available, pathology routinely uses morphological criteria as a spatial reference system. We here present and evaluate a method capable of performing the classification in immunofluorescence histological slides solely using a DAPI background stain. Due to the restriction to a single color channel this is inherently challenging. We formed cell graphs based on the topological distribution of the tissue cell nuclei and extracted the corresponding graph features. By using topological, morphological and intensity based features we could systematically quantify and compare the discrimination capability individual features contribute to the overall algorithm. We here show that when classifying fluorescence tissue slides in the DAPI channel, morphological and intensity based features clearly outpace topological ones which have been used exclusively in related previous approaches. We assembled the 15 best features to train a support vector machine based on Keratin stained tumor areas. On a test set of TMAs with 210 cores of triple negative breast cancers our classifier was able to distinguish between tumor and stroma tissue with a total overall accuracy of 88%. Our method yields first results on the discrimination capability of features groups which is essential for an automated tumor diagnostics. Also, it provides an objective spatial reference system for the multiplex analysis of biomarkers in fluorescence immunohistochemistry

A pigmented calcifying cystic odontogenic tumor associated with compound odontoma: a case report and review of literature

<p>Abstract</p> <p>Background</p> <p>Pigmented intraosseous odontogenic lesions are rare with only 47 reported cases in the English literature. Among them, pigmented calcifying cystic odontogenic tumor, formerly known as calcifying odontogenic cyst, is the most common lesion with 20 reported cases.</p> <p>Methods</p> <p>A case of pigmented calcifying cystic odontogenic tumor associated with odontoma occurring at the mandibular canine-premolar region of a young Japanese boy is presented with radiographic, and histological findings. Special staining, electron microscopic study and immunohistochemical staining were also done to characterize the pigmentation.</p> <p>Results</p> <p>The pigments in the lesion were confirmed to be melanin by Masson-Fontana staining and by transmission electron microscopy. The presence of dendritic melanocytes within the lesion was also demonstrated by S-100 immunostaining.</p> <p>Conclusion</p> <p>The present case report of pigmented calcifying cystic odontogenic tumor associated with odontoma features a comprehensive study on melanin and melanocytes, including histochemical, immunohistochemical and transmission electron microscopic findings.</p

Proceedings of the Fourth Annual Deep Brain Stimulation Think Tank: A Review of Emerging Issues and Technologies

This paper provides an overview of current progress in the technological advances and the use of deep brain stimulation (DBS) to treat neurological and neuropsychiatric disorders, as presented by participants of the Fourth Annual DBS Think Tank, which was convened in March 2016 in conjunction with the Center for Movement Disorders and Neurorestoration at the University of Florida, Gainesveille FL, USA. The Think Tank discussions first focused on policy and advocacy in DBS research and clinical practice, formation of registries, and issues involving the use of DBS in the treatment of Tourette Syndrome. Next, advances in the use of neuroimaging and electrochemical markers to enhance DBS specificity were addressed. Updates on ongoing use and developments of DBS for the treatment of Parkinson’s disease, essential tremor, Alzheimer’s disease, depression, post-traumatic stress disorder, obesity, addiction were presented, and progress toward innovation(s) in closed-loop applications were discussed. Each section of these proceedings provides updates and highlights of new information as presented at this year’s international Think Tank, with a view toward current and near future advancement of the field

Nucleation of the electroactive γ phase and enhancement of the optical transparency in low filler content poly(vinylidene)/clay nanocomposites

Poly(vinylidene fluoride), PVDF, based nanocomposites with different clays structures have been processed by solvent casting and melt crystallisation. Depending on the melting temperature of the polymer, the nanocomposite recrystalises in the electroactive or non electroactive β-phase of the polymer. This fact is related to the thermal behaviour of the clay. For montmorillonite clay, the full crystallisation of the electroactiveγ-phase occurs for clay contents lower than 0.5 wt%, allowing the nanocomposites to maintain the mechanical properties of the polymer matrix. The electroactivity of the material has been proven by measuring the piezoelectric d33 response of the material. The obtained value of d33 is -7 pC/N, lower than in β-PVDF obtained by mechanical stretching, but still among the largest coefficients obtained for polymers. Further, the optical transmittance in the visible range is strongly enhanced with respect to the transmittance of the pure polymer. Finally, it is demonstrated that the nucleation of the β-phase can be also obtained in other clays, such as in kaolinite and laponite.Fundação para a Ciência e a Tecnologia (FCT) - NANO/NMed-SD/0156/2007, PTDC/CTM/69316/2006, PTDC/CTM-NAN/112574/2009, SFRH/BD/62507/2009.FEDER funds through the "Programa Operacional Factores de Competitividade – COMPETECOST Action MP1003, the ‘European Scientific Network for Artificial Muscles’ (ESNAM)