138 research outputs found
Horn Operational Experience in K2K, MiniBooNE, NuMI and CNGS
This paper gives an overview of the operation and experience gained in the running of magnetic horns in conventional neutrino beam lines (K2K, MiniBooNE, NuMI and CNGS) over the last decade. Increasing beam power puts higher demands on horn conductors but even more on their hydraulic and electrical systems, while the horn environment itself becomes more hostile due to radiation. Experience shows that designing horns for remote handling and testing them extensively without beam become prerequisites for successful future neutrino beam lines
Metrology of the LHC Dipole Cold Masses
In order to provide the largest possible mechanical aperture for the LHC beam, the dipole cold masses have to match the circular trajectory of the particle beam. The requirements on the dipole cold mass geometry are dictated by the beam optics of the LHC machine and by the mechanical deformation limits of the interconnection zone. The geometry of the approximately 15Â m long, 0.57Â m diameter and 30Â t weight dipole cold mass is verified by the measurement of the axes of the cold bore tubes. The tight tolerances imposed, necessitate the use of a high accuracy 3D measuring system based on optical methods. During the last 2 years, 6 prototypes and 4 pre-series magnets have been assembled at CERN. The summary of the results obtained on these cold masses is presented, as well as the evolution of the tooling and the measuring method
Influence of geometrical parameters on the flexural rigidity of the LHC dipole cold mass assembly
In order to predict the mechanical behavior of the LHC dipole cold mass in situations such as handling, transport and cool down, a number of important structural parameters are required. The dipole's flexural rigidity determines entirely the mechanical elastic behavior of the cold mass. Therefore, models of a bent cold mass were created to calculate its rigidity. This paper presents a simplified parametric finite element model, created to study the deflection of the cold mass in different situations and supporting conditions. The sensitivity of the models to the supporting conditions is computed. To provide the finite element and the analytical models with input, the deflection of the cold mass under discrete loads in normal condition and then 90-degrees rotated were measured with a laser tracker. By comparing models with measurements, the vertical and transversal rigidity of the cold mass assembly are determined. Additionally, the paper reports on the plastic behavior of the cold mass assembly in the range of the deformations that are needed to correct cold masses that result, after final welding of the outer skin, with unacceptable sagitta
Design and Performance of the CNGS Secondary Beam Line
An intense muon-neutrino beam (1017nm /day) is generated at CERN and directed towards the Gran Sasso National Laboratory, LNGS, in Italy, 732 km away from CERN. In the presently approved physics programme, it is foreseen to run the CNGS facility with 4.5.1019 protons per year for five years. During a nominal CNGS cycle, i.e. every 6s, two nominal SPS extractions of 2.4.1013 protons each at 400GeV/c are sent down the proton beam line to the target. The CNGS secondary beam line, starting with the target, has to cope with this situation, which pushes the beam line equipment and instrumentation to the limits of radiation hardness and mechanical stresses during the CNGS operation. An overview of the CNGS secondary beam line is given. Emphasis is on the target, the magnetic focusing lenses (horn and reflector) and the muon monitors. The performance of the secondary beam line during beam commissioning and physics operation is discussed and measurements are compared with simulations
THE CNGS FACILITY: PERFORMANCE AND OPERATIONAL EXPERIENCE
The CNGS facility (CERN Neutrinos to Gran Sasso) aims at directly detecting muon to tau neutrino oscillations. An intense muon-neutrino beam (1E17 muon neutrinos/day) is generated at CERN and directed over 732 km towards the Gran Sasso National Laboratory, LNGS, in Italy, where two large and complex detectors, OPERA and ICARUS, are located. CNGS is the first long-baseline neutrino facility in which the measurement of the oscillation parameters is performed by observation of tau-neutrino appearance. In this paper, an overview of the CNGS facility is presented. The experience gained in operating this 500 kW neutrino beam facility is described. Major events since the commissioning of the facility in 2006 are summarized. Highlights on CNGS beam performance since the start of physics run in 2008 are given
First Year Physics at CNGS, presented at PAC09, Vancouver, Canada, 4-8 May 2009
The CNGS facility (CERN Neutrinos to Gran Sasso) aims at directly detecting νμ→ντ neutrino oscillations [1]. An intense νμ beam (1017 νμ per day) is generated at CERN and directed over 732 km towards the Gran Sasso National Laboratory, LNGS, in Italy, where two large and complex detectors, OPERA and ICARUS, are located. Having resolved successfully some initial issues that occurred since its commissioning in 2006, that will be briefly summarized here, the facility had its first complete year of physics with 1.78×10^19 protons extracted towards CNGS. The experiences gained in operating this 500 kW neutrino beam facility along with highlights of the beamperformance in 2008 are discussed
First Year of Physics at CNGS
The CNGS facility (CERN Neutrinos to Gran Sasso) aims at directly detecting νμ→ντ neutrino oscillations [1]. An intense νμ beam (1017 νμ per day) is generated at CERN and directed over 732 km towards the Gran Sasso National Laboratory, LNGS, in Italy, where two large and complex detectors, OPERA and ICARUS, are located. Having resolved successfully some initial issues that occurred since its commissioning in 2006, that will be briefly summarized here, the facility had its first complete year of physics with 1.78×1019 protons extracted towards CNGS. The experiences gained in operating this 500 kW neutrino beam facility along with highlights of the beam performance in 2008 are discussed
Particle physics applications of the AWAKE acceleration scheme
The AWAKE experiment had a very successful Run 1 (2016-8), demonstrating
proton-driven plasma wakefield acceleration for the first time, through the
observation of the modulation of a long proton bunch into micro-bunches and the
acceleration of electrons up to 2 GeV in 10 m of plasma. The aims of AWAKE Run
2 (2021-4) are to have high-charge bunches of electrons accelerated to high
energy, about 10 GeV, maintaining beam quality through the plasma and showing
that the process is scalable. The AWAKE scheme is therefore a promising method
to accelerate electrons to high energy over short distances and so develop a
useable technology for particle physics experiments. Using proton bunches from
the SPS, the acceleration of electron bunches up to about 50 GeV should be
possible. Using the LHC proton bunches to drive wakefields could lead to
multi-TeV electron bunches, e.g. with 3 TeV acceleration achieved in 4 km of
plasma. This document outlines some of the applications of the AWAKE scheme to
particle physics and shows that the AWAKE technology could lead to unique
facilities and experiments that would otherwise not be possible. In particular,
experiments are proposed to search for dark photons, measure strong field QED
and investigate new physics in electron-proton collisions. The community is
also invited to consider applications for electron beams up to the TeV scale.Comment: 12 pages, 8 figures, submitted to the European Particle Physics
Strategy Update process. arXiv admin note: substantial text overlap with
arXiv:1810.1225
Prospects for at CERN in NA62
The NA62 experiment will begin taking data in 2015. Its primary purpose is a
10% measurement of the branching ratio of the ultrarare kaon decay , using the decay in flight of kaons in an unseparated
beam with momentum 75 GeV/c.The detector and analysis technique are described
here.Comment: 8 pages for proceedings of 50 Years of CP
- …