Estimations of electron-positron pair production at high-intensity laser interaction with high-Z targets

Electron-positron pairs' generation occuring in the interaction of $10^{18}$-$10^{20}$~W/cm$^2$ laser radiation with high-Z targets are examined. Computational results are presented for the pair production and the positron yield from the target with allowance for the contribution of pair production processes due to electrons and bremsstrahlung photons. Monte-Carlo simulations using the PRIZMA code confirm the estimates obtained. The possible positron yield from high-Z targets irradiated by picosecond lasers of power $10^2$-$10^3$~TW is estimated to be $10^9$-$10^{11}$

Investigation of tool-py friction of viscous textile composites (CD-rom)

Dynamic tool-ply friction for a thermoplastic viscous textile composite has been measured using a commercial rotational rheometer as a function of rate, temperature and normal pressure. Results of this novel experimental technique have enabled a general empirical equation to be determined relating the dynamic friction force to experimental conditions. The method has been corroborated using an alternative experimental technique. Advantages of using the rheometer include significantly faster production of data and more precise measurement of experimental conditions

Non-collinear wavemixing for non-linear ultrasonic detection of physical ageing

a b s t r a c t This work considers the characterization of linear PVC acoustic properties using a linear ultrasonic measurement technique and the non-collinear ultrasonic wave mixing technique for measurement of the physical ageing state in PVC. The immersion pulse-echo measurements were used to evaluate phase velocity dispersion and attenuation of longitudinal waves in PVC test specimens. The suggested noncollinear ultrasonic wave mixing technique measurement technique was verified on measurements of laboratory and field PVC test specimens. The measurement results confirm that the ultrasonic wave mixing technique is suitable to estimate the physical ageing state of PVC

Colistin dry powder inhalation with the Twincer (TM):An effective and more patient friendly alternative to nebulization

BACKGROUND: Nebulization of antimicrobial drugs such as tobramycin and colistin is a cornerstone in the treatment of patients with cystic fibrosis (CF) infected with Pseudomonas aeruginosa. However, nebulization has a high treatment burden. The Twincer™ is a dry powder inhaler specifically developed for the inhalation of antibiotics such as colistin. The aim of this study was to compare patient outcomes and experience with colistin dry powder by the Twincer with nebulization of colistin or tobramycin in adult CF patients in a real-life setting. METHODS: This was a retrospective study from 01-01-2015 until 01-07-2018. Effectiveness was evaluated by comparing FEV1 decline and exacerbation rate during a mean of 4.1 years of nebulization therapy prior to the initiation of the Twincer against the same values during a mean of 1.7 years of treatment with the Twincer. RESULTS: Twenty-one patients were evaluated, of whom twelve could be included in the effectiveness analysis, with a total of twenty patient years. Of all patients 71.4% preferred therapy with the Twincer over nebulization. Twincer use resulted in high treatment adherence with an average adherence rate of 92.5%. There was no significant difference in annual decline in FEV1%pred prior to and after start changing from nebulization to the use of the Twincer powder inhaler (median decline -1.56 [-5.57-5.31] and 1.35 [-8.45-6.36]) respectively, p = 0.45 (linear mixed effect model)). No significant difference was found in the number of intravenous or combined total intravenous and oral antibiotic courses during Twincer therapy compared to when using nebulization (1.68 and 2.49 courses during Twincer therapy versus 1.51 and 2.94 courses during nebulization, p = 0.88 and p = 0.63). CONCLUSION: Colistin dry powder inhalation with the Twincer is a more patient friendly alternative to nebulization, and we did not observe significant differences in the clinical outcome, regarding lung function and exacerbation rates

Orbital Interaction Mechanisms of Conductance Enhancement and Rectification by Dithiocarboxylate Anchoring Group

We study computationally the electron transport properties of dithiocarboxylate terminated molecular junctions. Transport properties are computed self-consistently within density functional theory and nonequilibrium Green's functions formalism. A microscopic origin of the experimentally observed current amplification by dithiocarboxylate anchoring groups is established. For the 4,4'-biphenyl bis(dithiocarboxylate) junction, we find that the interaction of the lowest unoccupied molecular orbital (LUMO) of the dithiocarboxylate anchoring group with LUMO and highest occupied molecular orbital (HOMO) of the biphenyl part results in bonding and antibonding resonances in the transmission spectrum in the vicinity of the electrode Fermi energy. A new microscopic mechanism of rectification is predicted based on the electronic structure of asymmetrical anchoring groups. We show that the peaks in the transmission spectra of 4'-thiolato-biphenyl-4-dithiocarboxylate junction respond differently to the applied voltage. Depending upon the origin of a transmission resonance in the orbital interaction picture, its energy can be shifted along with the chemical potential of the electrode to which the molecule is more strongly or more weakly coupled

Distinct fermentation of human milk oligosaccharides 3-FL and LNT2 and GOS/inulin by infant gut microbiota and impact on adhesion of Lactobacillus plantarum WCFS1 to gut epithelial cells

Human milk oligosaccharides (hMOs) are unique bioactive components in human milk. 3-Fucosyllactose (3-FL) is an abundantly present hMO that can be produced in sufficient amounts to allow application in infant formula. Lacto-N-triaose II (LNT2) can be obtained by acid hydrolysis of lacto-N-neotetraose (LNnT). Both 3-FL and LNT2 have been shown to have health benefits, but their impact on infant microbiota composition and microbial metabolic products such as short-chain fatty acids (SCFAs) is unknown. To gain more insight in fermentability, we performed in vitro fermentation studies of 3-FL and LNT2 using pooled fecal microbiota from 12-week-old infants. The commonly investigated galacto-oligosaccharides (GOS)/inulin (9 : 1) served as control. Compared to GOS/inulin, we observed a delayed utilization of 3-FL, which was utilized at 60.3% after 36 h of fermentation, and induced the gradual production of acetic acid and lactic acid. 3-FL specifically enriched bacteria of Bacteroides and Enterococcus genus. LNT2 was fermented much faster. After 14 h of fermentation, 90.1% was already utilized, and production of acetic acid, succinic acid, lactic acid and butyric acid was observed. LNT2 specifically increased the abundance of Collinsella, as well as Bifidobacterium. The GOS present in the GOS/inulin mixture was completely fermented after 14 h, while for inulin, only low DP was rapidly utilized after 14 h. To determine whether the fermentation might lead to enhanced colonization of commensal bacteria to gut epithelial cells, we investigated adhesion of the commensal Lactobacillus plantarum WCFS1 to Caco-2 cells. The fermentation digesta of LNT2 collected after 14 h, 24 h, and 36 h, and GOS/inulin after 24 h of fermentation significantly increased the adhesion of L. plantarum WCFS1 to Caco-2 cells, while 3-FL had no such effect. Our findings illustrate that fermentation of hMOs is very structure-dependent and different from the commonly applied GOS/inulin, which might lead to differential potencies to stimulate adhesion of commensal cells to gut epithelium and consequent microbial colonization. This knowledge might contribute to the design of tailored infant formulas containing specific hMO molecules to meet the need of infants during the transition from breastfeeding to formula

Cluster-based density-functional approach to quantum transport through molecular and atomic contacts

We present a cluster-based density-functional approach to model charge transport through molecular and atomic contacts. The electronic structure of the contacts is determined in the framework of density functional theory, and the parameters needed to describe transport are extracted from finite clusters. A similar procedure, restricted to nearest-neighbor interactions in the electrodes, has been presented by Damle et al. [Chem. Phys. 281, 171 (2002)]. Here, we show how to systematically improve the description of the electrodes by extracting bulk parameters from sufficiently large metal clusters. In this way we avoid problems arising from the use of nonorthogonal basis functions. For demonstration we apply our method to electron transport through Au contacts with various atomic-chain configurations and to a single-atom contact of Al.Comment: 18 pages, 13 figure

Tolerability and pharmacokinetic evaluation of inhaled dry powder hydroxychloroquine in healthy volunteers

RATIONALE: Inhaled antimicrobials enable high local concentrations where needed and, compared to orally administration, greatly reduce the potential for systemic side effects. In SARS-CoV-2 infections, hydroxychloroquine sulphate (HCQ) administered as dry powder via inhalation could be safer than oral HCQ allowing higher and therefore more effective pulmonary concentrations without dose limiting toxic effects. OBJECTIVES: To assess the local tolerability, safety and pharmacokinetic parameters of HCQ inhalations in single ascending doses of 5, 10 and 20 mg using the Cyclops dry powder inhaler. METHODS: Twelve healthy volunteers were included in the study. Local tolerability and safety were assessed by pulmonary function tests, electrocardiogram and recording adverse events. To estimate systemic exposure, serum samples were collected before and 0.5, 2 and 3.5 h after inhalation. RESULTS AND DISCUSSION: Dry powder HCQ inhalations were well tolerated by the participants, except for transient bitter taste in all participants and minor coughing irritation. There was no significant change in QTc-interval or drop in FEV1 post inhalation. The serum HCQ concentration remained below 10 μg/L in all samples. CONCLUSION: Single doses of inhaled dry powder HCQ up to 20 mg are safe and well tolerated. Our data support that further studies with inhaled HCQ dry powder to evaluate pulmonary pharmacokinetics and efficacy are warranted