Functionalization of different polymers with sulfonic groups as a way to coat them with a biomimetic apatite layer

Covalent coupling of sulfonic group (–SO3H) was attempted on different polymers to evaluate efficacy of this functional group in inducing nucleation of apatite in body environment, and thereupon to design a simple biomimetic process for preparing bonelike apatite-polymer composites. Substrates of polyethylene terephthalate (PET), polycaprolactam (Nylon 6), high molecular weight polyethylene (HMWPE) and ethylene-vinyl alcohol copolymer (EVOH) were subjected to sulfonation by being soaked in sulfuric acid (H2SO4) or chlorosulfonic acid (ClSO3H) with different concentrations. In order to incorporate calcium ions, the sulfonated substrates were soaked in saturated solution of calcium hydroxide (Ca(OH)2). The treated substrates were soaked in a simulated body fluid (SBF). Fourier transformed infrared spectroscopy, thin-film X-ray diffraction, and scanning electron microscopy showed that the sulfonation and subsequent Ca(OH)2 treatments allowed formation of –SO3H groups binding Ca2+ ions on the surface of HMWPE and EVOH, but not on PET and Nylon 6. The HMWPE and EVOH could thus form bonelike apatite layer on their surfaces in SBF within 7 d. These results indicate that the –SO3H groups are effective for inducing apatite nucleation, and thereby that surface sulfonation of polymers are effective pre-treatment method for preparing biomimetic apatite on their surfaces

Formation of bone-like apatite layer on chitosan fiber mesh scaffolds by a biomimetic spraying process

Bone-like apatite coating of polymeric substrates by means of biomimetic process is a possible way to enhance the bone bonding ability of the materials. The created apatite layer is believed to have an ability to provide a favorable environment for osteoblasts or osteoprogenitor cells. The purpose of this study is to obtain bone-like apatite layer onto chitosan fiber mesh tissue engineering scaffolds, by means of using a simple biomimetic coating process and to determine the influence of this coating on osteoblastic cell responses. Chitosan fiber mesh scaffolds produced by a previously described wet spinning methodology were initially wet with a Bioglass"–water suspension by means of a spraying methodology and then immersed in a simulated body fluid (SBF) mimicking physiological conditions for one week. The formation of apatite layer was observed morphologically by scanning electron microscopy (SEM). As a result of the use of the novel spraying methodology, a fine coating could also be observed penetrating into the pores, that is clearly within the bulk of the scaffolds. Fourier Transform Infrared spectroscopy (FTIRATR), Electron Dispersive Spectroscopy (EDS) and X-ray diffraction (XRD) analysis also confirmed the presence of apatite-like layer. A human osteoblast-like cell line (SaOs-2) was used for the direct cell contact assays. After 2 weeks of culture, samples were observed under the SEM. When compared to the control samples (unmodified chitosan fiber mesh scaffolds) the cell population was found to be higher in the Ca–P biomimetic coated scaffolds, which indicates that the levels of cell proliferation on this kind of scaffolds could be enhanced. Furthermore, it was also observed that the cells seeded in the Ca–P coated scaffolds have a more spread and flat morphology, which reveals an improvement on the cell adhesion patterns, phenomena that are always important in processes such as osteoconduction

Hydroxyapatite Mineralization on the Calcium Chloride Blended Polyurethane Nanofiber via Biomimetic Method

Polyurethane nanofibers containing calcium chloride (CaCl2) were prepared via an electrospinning technique for the biomedical applications. Polyurethane nanofibers with different concentration of CaCl2 were electrospun, and their bioactivity evaluation was conducted by incubating in biomimetic simulated body fluid (SBF) solution. The morphology, structure and thermal properties of the polyurethane/CaCl2 composite nanofibers were characterized by means of scanning electron microscopy (SEM), field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetry. SEM images revealed that the CaCl2 salt incorporated homogeneously to form well-oriented nanofibers with smooth surface and uniform diameters along their lengths. The SBF incubation test confirmed the formation of apatite-like materials, exhibiting enhanced bioactive behavior of the polyurethane/CaCl2 composite nanofibers. This study demonstrated that the electrospun polyurethane containing CaCl2 composite nanofibers enhanced the in vitro bioactivity and supports the growth of apatite-like materials

Seasonality in depressive and anxiety symptoms among primary care patients and in patients with depressive and anxiety disorders; results from the Netherlands Study of Depression and Anxiety

<p>Abstract</p> <p>Background</p> <p>Little is known about seasonality of specific depressive symptoms and anxiety symptoms in different patient populations. This study aims to assess seasonal variation of depressive and anxiety symptoms in a primary care population and across participants who were classified in diagnostic groups 1) healthy controls 2) patients with a major depressive disorder, 3) patients with any anxiety disorder and 4) patients with a major depression and any anxiety disorder.</p> <p>Methods</p> <p>Data were used from the Netherlands Study of Depression and Anxiety (NESDA). First, in 5549 patients from the NESDA primary care recruitment population the Kessler-10 screening questionnaire was used and data were analyzed across season in a multilevel linear model. Second, in 1090 subjects classified into four groups according to psychiatric status according to the Composite International Diagnostic Interview, overall depressive symptoms and atypical versus melancholic features were assessed with the Inventory of Depressive Symptoms. Anxiety and fear were assessed with the Beck Anxiety Inventory and the Fear questionnaire. Symptom levels across season were analyzed in a linear regression model.</p> <p>Results</p> <p>In the primary care population the severity of depressive and anxiety symptoms did not show a seasonal pattern. In the diagnostic groups healthy controls and patients with any anxiety disorder, but not patients with a major depressive disorder, showed a small rise in depressive symptoms in winter. Atypical and melancholic symptoms were both elevated in winter. No seasonal pattern for anxiety symptoms was found. There was a small gender related seasonal effect for fear symptoms.</p> <p>Conclusions</p> <p>Seasonal differences in severity or type of depressive and anxiety symptoms, as measured with a general screening instrument and symptom questionnaires, were absent or small in effect size in a primary care population and in patient populations with a major depressive disorder and anxiety disorders.</p

Transport of small anionic and neutral solutes through chitosan membranes: Dependence on cross-linking and chelation of divalent cations

Chitosan membranes were prepared by solvent casting and cross-linked with glutaraldehyde at several ratios under homogeneous conditions. The cross-linking degree, varying from 0 to 20%, is defined as the ratio between the total aldehyde groups and the amine groups of chitosan. Permeability experiments were conducted using a side-by-side diffusion cell to determine the flux of small molecules of similar size but with different chemical moieties, either ionized (benzoic acid, salicylic acid, and phthalic acid) or neutral (2-phenylethanol) at physiological pH. The permeability of the different model molecules revealed to be dependent on the affinity of those structurally similar molecules to chitosan. The permeability of the salicylate anion was significantly enhanced by the presence of metal cations commonly present in biological fluids, such as calcium and magnesium, but remained unchanged for the neutral 2-phenylethanol. This effect could be explained by the chelation of metal cations on the amine groups of chitosan, which increased the partition coefficient. The cross-linking degree was also correlated with the permeability and partition coefficient. The change in the permeation properties of chitosan to anionic solutes in the presence of these metallic cations is an important result and should be taken into consideration when trying to make in vitro predictions of the drug release from chitosan-based controlled release systems

Numerical Simulations of Void Linkage in Model Materials using a Nonlocal Ductile Damage Approximation

Experiments on the growth and linkage of 10 μm diameter holes laser drilled in high precision patterns into Al-plates were modelled with finite elements. The simulations used geometries identical to those of the experiments and incorporated ductile damage by element removal under the control of a ductile damage indicator based on the micromechanical studies of Rice and Tracey. A regularization of the problem was achieved through an integral-type nonlocal model based on the smoothing of the rate of a damage indicator D over a characteristic length L. The simulation does not predict the experimentally observed damage acceleration either in the case where no damage is included or when only a local damage model is used. However, the full three-dimensional simulations based on the nonlocal damage methodology do predict both the failure path and the failure strain at void linkage for almost all configurations studied. For the cases considered the critical parameter controlling the local deformations at void linkage was found to be the ratio between hole diameter and hole spacing

Insomnia in school-age children with Asperger syndrome or high-functioning autism

BACKGROUND: Asperger syndrome (AS) and high-functioning autism (HFA) are pervasive developmental disorders (PDD) in individuals of normal intelligence. Childhood AS/HFA is considered to be often associated with disturbed sleep, in particular with difficulties initiating and/or maintaining sleep (insomnia). However, studies about the topic are still scarce. The present study investigated childhood AS/HFA regarding a wide range of parent reported sleep-wake behaviour, with a particular focus on insomnia. METHODS: Thirty-two 8–12 yr old children with AS/HFA were compared with 32 age and gender matched typically developing children regarding sleep and associated behavioural characteristics. Several aspects of sleep-wake behaviour including insomnia were surveyed using a structured paediatric sleep questionnaire in which parents reported their children's sleep patterns for the previous six months. Recent sleep patterns were monitored by use of a one-week sleep diary and actigraphy. Behavioural characteristics were surveyed by use of information gleaned from parent and teacher-ratings in the High-Functioning Autism Spectrum Screening Questionnaire, and in the Strengths and Difficulties Questionnaire. RESULTS: Parent-reported difficulties initiating sleep and daytime sleepiness were more common in children with AS/HFA than in controls, and 10/32 children with AS/HFA (31.2%) but none of the controls fulfilled our definition of paediatric insomnia. The parent-reported insomnia corresponded to the findings obtained by actigraphy. Children with insomnia had also more parent-reported autistic and emotional symptoms, and more teacher-reported emotional and hyperactivity symptoms than those children without insomnia. CONCLUSION: Parental reports indicate that in childhood AS/HFA insomnia is a common and distressing symptom which is frequently associated with coexistent behaviour problems. Identification and treatment of sleep problems need to be a routine part of the treatment plan for children with AS/HFA

Biomagnetic of Apatite-Coated Cobalt Ferrite: A Core–Shell Particle for Protein Adsorption and pH-Controlled Release

Magnetic nanoparticle composite with a cobalt ferrite (CoFe2O4, (CF)) core and an apatite (Ap) coating was synthesized using a biomineralization process in which a modified simulated body fluid (1.5SBF) solution is the source of the calcium phosphate for the apatite formation. The core–shell structure formed after the citric acid–stabilized cobalt ferrite (CFCA) particles were incubated in the 1.5 SBF solution for 1 week. The mean particle size of CFCA-Ap is about 750 nm. A saturation magnetization of 15.56 emug-1 and a coercivity of 1808.5 Oe were observed for the CFCA-Ap obtained. Bovine serum albumin (BSA) was used as the model protein to study the adsorption and release of the proteins by the CFCA-Ap particles. The protein adsorption by the CFCA-Ap particles followed a more typical Freundlich than Langmuir adsorption isotherm. The BSA release as a function of time became less rapid as the CFCA-Ap particles were immersed in higher pH solution, thus indicating that the BSA release is dependent on the local pH

Comprehensive in vitro and in vivo studies of novel melt-derived Nb-substituted 45S5 bioglass reveal its enhanced bioactive properties for bone healing

The present work presents and discusses the results of a comprehensive study on the bioactive properties of Nb-substituted silicate glass derived from 45S5 bioglass. In vitro and in vivo experiments were performed. We undertook three different types of in vitro analyses: (i) investigation of the kinetics of chemical reactivity and the bioactivity of Nb-substituted glass in simulated body fluid (SBF) by 31P MASNMR spectroscopy, (ii) determination of ionic leaching profiles in buffered solution by inductively coupled plasma optical emission spectrometry (ICP-OES), and (iii) assessment of the compatibility and osteogenic differentiation of human embryonic stem cells (hESCs) treated with dissolution products of different compositions of Nb-substituted glass. The results revealed that Nb-substituted glass is not toxic to hESCs. Moreover, adding up to 1.3 mol% of Nb2O5 to 45S5 bioglass significantly enhanced its osteogenic capacity. For the in vivo experiments, trial glass rods were implanted into circular defects in rat tibia in order to evaluate their biocompatibility and bioactivity. Results showed all Nb-containing glass was biocompatible and that the addition of 1.3 mol% of Nb2O5, replacing phosphorous, increases the osteostimulation of bioglass. Therefore, these results support the assertion that Nb-substituted glass is suitable for biomedical applications