La cantidad de madera muerta y sus tasas de descomposición asociadas en reservas forestales y bosques manejados en el noroeste de Turquía

This study describes the state of coarse dead wood (CDW) in the Forest Reserve and the Managed Forest zones of northern conifer-broadleaved mixed forest. The results showed mean total CDW volumes in the ranges 30,05±11,06 m3/ha in the Forest Reserve (6,33±2,98% of the LW volume), and 9,31±2,84 m3/ha in the Managed Forest (1,96±0,84% of the LW volume). The total CDW volume was 3,22 times higher in the Forest Reserve than in the Managed Forest. The CDWlog1 and CDWsnag1 were the most abundant CDW decay classes, whilst CDWlog2 and CDWsnag2 were the lowest. Comparisons of ratios between the Managed Forest and the Forest Reserve with abundant decay classes CDWlog1 and CDWsnag1 indicated large differences. The CDWlog1 volume was 4,09 times higher, and the CDWsnag1 volume was 3,68 times greater in the Forest Reserve than in the Managed Forest. The ratio of different CWD classes in the Managed Forest to CWD classes in the Reserve Forest confirms the pattern. In both Managed and Reserve Forest zones there is balance between total CDWlogs and total CDWsnags, but the differences between total CDWlogs and total CDWsnags was not statistically significant. The total CDW volume was significantly dependent on the forest management system. The system influenced amount and diversity of CDW. In commercially managed forest the abundance and structure of CDW retained is a compromise between the needs of timber production and nature conservation.Este estudio describe el estado de la madera muerta en la zona de reserva forestal y zonas de bosques manejados de coníferas del norte de bosques mixtos de frondosas. Los resultados mostraron que la media total de los volúmenes de madera muerta es igual a 30,05 ± 11,06 m3 / ha en la Reserva Forestal (6,33 ± 2,98% del volumen de madera en pie), y 9,31 ± 2,84 m3 / ha en los bosques manejados (1,96 ± 0,84% del volumen de LW). El volumen total de madera muerta fue de 3,22 veces mayor en la Reserva Forestal de que en el bosque administrado. Las clases de decaimiento de madera muerta más abundantes eran CDWlog1 y CDWsnag1, mientras que CDWlog2 y CDWsnag2 fueron los menos abundantes. Las comparaciones de las proporciones entre el bosque manejado y la Reserva Forestal con las clases de decaimiento más abundantes (CDWlog1 y CDWsnag1) indican grandes diferencias ente las dos zonas. El volumen CDWlog1 fue 4,09 veces mayor, y el volumen CDWsnag1 fue 3,68 veces mayor en la Reserva Forestal de que en el bosque manejado. La relación de las diferentes clases de decaimiento entre los bosques manejados y la Reserva Forestal confirma el patrón. En ambos casos, bosque manejado y zonas de reserva forestal, existe un equilibrio entre CDWlogs total y CDWsnags total, pero las diferencias entre CDWlogs total y CDWsnags total no fue estadísticamente significativa. El volumen total de madera muerta depende significativamente del sistema de gestión forestal. El sistema de manejo influye sobre la cantidad y diversidad de madera muerta. En una gestión comercial de los bosques, la abundancia y estructura de madera muerta presente es un compromiso entre las necesidades de la producción de madera y la conservación de la naturaleza

Chiral metamaterials with negative refractive index based on four "U" split ring resonators

A uniaxial chiral metamaterial is constructed by double-layered four "U" split ring resonators mutually twisted by 90 degrees. It shows a giant optical activity and circular dichroism. The retrieval results reveal that a negative refractive index is realized for circularly polarized waves due to the large chirality. The experimental results are in good agreement with the numerical results.Comment: 4 pages, 4 figures, Published as cover on AP

Transmission enhancement through deep subwavelength apertures using connected split ring resonators

Cataloged from PDF version of article.We report astonishingly high transmission enhancement factors through a subwavelength aperture at microwave frequencies by placing connected split ring resonators in the vicinity of the aperture. We carried out numerical simulations that are consistent with our experimental conclusions. We experimentally show higher than 70,000-fold extraordinary transmission through a deep subwavelength aperture with an electrical size of lambda/31x lambda/12 (width x length), in terms of the operational wavelength. We discuss the physical origins of the phenomenon. Our numerical results predict that even more improvements of the enhancement factors are attainable. Theoretically, the approach opens up the possibility for achieving very large enhancement factors by overcoming the physical limitations and thereby minimizes the dependence on the aperture geometries. (C) 2010 Optical Society of Americ

Correlation Between K-value, Density Index and Bifilm Index in Determination of Liquid Al Cleanliness

Aluminum alloys are widely used in the industry thanks to its many advantages such as light weight and high strength. The use of this material in the market is increasing day by day with the developing technology. Due to the high energy inputs in the primary production, the use of secondary ingots by recycling from scrap material are more advantageous. However, the liquid metal quality is quite important in the use of secondary aluminum. It is believed that the quality of recycled aluminum is low, for this purpose, many liquid metal cleaning methods and test methods are used in the industry to assess the melt cleanliness level. In this study, it is aimed to examine the liquid metal quality in castings with varying temperature using K mold. A206 alloy was used, and the test parameters were selected as: (i) at 725 °C, 750 °C and 775 °C casting temperatures, (ii) different hydrogen levels. The hydrogen level was adjusted as low, medium and high with degassing, as-cast, and upgassing of the melt, respectively. The liquid metal quality of the cast samples was examined by the K mold technique. When the results were examined, it was determined that metal K values and the number of inclusions were high at the as-cast and up-gas liquid with increasing casting temperatures. It has been understood that the K mold technique is a practical method for the determination of liquid metal quality, if there is no reduced pressure test machine available at the foundry floor

Multiple Projection Optical Diffusion Tomography with Plane Wave Illumination

We describe a new data collection scheme for optical diffusion tomography in which plane wave illumination is combined with multiple projections in the slab imaging geometry. Multiple projection measurements are performed by rotating the slab around the sample. The advantage of the proposed method is that the measured data can be much more easily fitted into the dynamic range of most commonly used detectors. At the same time, multiple projections improve image quality by mutually interchanging the depth and transverse directions, and the scanned (detection) and integrated (illumination) surfaces. Inversion methods are derived for image reconstructions with extremely large data sets. Numerical simulations are performed for fixed and rotated slabs

Processing of weather radar raw IQ-data towards the identification and correction of wind turbine interference – Project RIWER: Removing the Influence of Wind Park Echoes in Weather Radar Measurements

In recent years, the fast construction, expansion and repowering of wind parks have been a major source of concern for the weather radar community and meteorological services. Among others because wind turbines are extremely tall, reflective, and moving objects, which make them a source of interference that is hard to distinguish from meteorological echoes and therefore difficult to filter and even more difficult to correct. Polarimetric C-Band Doppler weather radar measurements enable us to analyse and understand the impact of wind turbine interference on meteorological weather radar echoes and to build up knowledge. The main idea is to analyse the raw IQ-data in order to quantify the behaviour of wind turbine interference with meteorological scattering. As a first step in this direction, this paper will focus on the derivation and analysis of radar moments such as Reflectivity (Z), Differential Reflectivity (ZDR), Differential Propagation Phase (PHIDP), Mean Doppler Velocity (V), and Correlation Coefficient (RHOHV). We will consider two cases: (i) events with precipitation, and (ii) events without precipitation, in order to understand and model the impact of wind turbine interference (WTI). For this purpose, weather radar measurements from Deutscher Wetterdienst (DWD), recorded under the aegis of the project RIWER (Removing the Influence of Wind Park Echoes in Weather Radar Measurements), are presented, analysed and discussed in detail.</p

BISTATIC SCATTERING CHARACTERISTICS OF A WIND PARK TURBINE DERIVED FROM AN UAV-MOUNTED RECEIVER RECORDING C-BAND WEATHER RADAR SIGNALS

As a result of increasing use of wind energy as a sustainable source of electricity, large Wind Parks with numerous Wind Turbines have been constructed. Wind turbines are extremely tall objects consisting of stationary and moving parts. The presence of wind turbines in the vicinity of weather radar systems can significantly impact their performance, leading to false alarms and errors in radar measurements. Accurate weather forecasting is challenging in this circumstance. Large Radar Cross Section (RCS) of wind turbines results in interference, also known asWind Turbine Clutter (WTC) orWind Turbine Interference (WTI), within and beyond the radar main beam, Multipath Interference (MPI), and phenomena referred to as ”shadowing effects” behind the wind turbines. These effects vary significantly in both time and space as a result of various wind turbine operations and meteorological conditions. It can often be difficult to distinguish wind turbine returns from weather-like signals. For the assessment of WTC or WTI, it is essential to understand the scattering properties of these wind turbines. In this paper, the bistatic scattering characteristics of a wind park turbine using a Unmanned Aerial Vehicle (UAV)-mounted receiver recording C-band weather radar signals were investigated by determining the average received power (PRxAvg (&theta;s)) and RCS of wind turbine as a function of the scattering angle. For this purpose, the measurements and data provided by the German Meteorological Service (DWD, DeutscherWetterdienst) were utilised. The average received power as a function of scattering angle (&theta;s) was calculated by using I-Q (In-phase and Quadrature) signals. Forward, back and side scattering of the calculated average received power were analysed separately. Moreover, Front-to-Back ratio, Front-to-Right side ratio and Front-to-Left side ratio were calculated and compared using forward, back and side scatter values. RCS values were also calculated depending on the scattering angle (&theta;s) of the wind turbine

<記録II>ハミル館一〇〇年の歩み : 1918～2018

Renewable energy systems are of importance as being modular, nature-friendly and domestic. Among the renewable energy systems, a great deal of research has been conducted especially on photovoltaic, wind energy and fuel cell in the recent years. One of the hybrid renewable energy systems consisting of 5 kWp photovoltaic panels, 800 Wp wind turbines and 2.4 kWp fuel cell modules was installed at Clean Energy House (CEH), Pamukkale University in Denizli, Turkey. To protect this laboratory, a "Lightning Protection System" was installed at the CEH. In this study, design and installation processes of a lightning protection system for the hybrid renewable energy system at the CEH are considered. III. 7, bibl. 15 (in English; abstracts in English and Lithuanian)

Introduction and Evaluation of the Wood Preservative potentials of the Poisonous Sternbergia canadidum extracts

The ability of Sternbergia candida (SB Candidum Mathew Treated blocks were exposed to P. placenta and T. versicolor attack for 12 weeks by the soil block method. Only extract dosages of 0.25 and 0.75% were found efficacious in suppressing attack. A tukey studentized test found both dosages significant at 5% level. In conclusion, the poisonous extracts could be used as effective wood preservative when concentration was adjusted