101 research outputs found
A Method for the Measurement of Digitizers’ Absolute Phase Error
A lot of engineering applications, from telecommunications to power systems, require
accurate measurement of phase angles. Some of them, like synchrophasor measurement and
calibration of instrument transformers with digital output, in order to reach high phase
measurement accuracy, require the knowledge of phase error of digitizers. Therefore, in this
paper a method for the measurement of digitizers’ absolute phase errors is proposed. It adopts a
sinewave and two square waves, that are the digitizer sample clock and a phase reference signal.
Combining the measurements of the relative phase differences between the adopted signals it is
possible to accurately evaluate the absolute phase error of a digitize
Design of a Stationary Energy Recovery System in Rail Transport
Although rail is one of the most sustainable transport systems, there is still room to reduce its energy demand. In particular, during the braking of DC powered trains, a significant amount of energy is wasted. The recent developments in energy storage system technologies, combined with the widely used technique of regenerative braking, can considerably increase energy saving. This paper explores this theme, quantifying the amount of braking energy that can be potentially recovered in a real case study, starting from the experimental data measured on-board train. A simplified numerical model of the recovery process has been implemented. Adopting it, the energy that can be saved, with one or two energy storage systems, has been quantified for each possible position along the track. The procedure allows to determine the optimal position. Further findings about the impact of voltage level on the efficiency of the recovery process have been reported. The optimal level of voltage has been determined, also considering the additional losses in the catenary, both during the traction and braking phase of the train. Moreover, it allows dimensioning of stationary storage systems considering two different energy management strategies and their impact on the peak of stored energy. The proposed approach will be presented with reference to the concrete case of a specific route on the Italian rail network, analyzing a train in normal commuter service and the obtained results will be discussed. In the best situation, about the 73% of the braking energy can be recovered
Calibration of voltage and current transducers for dc railway systems
To establish a single European railway area, the European Commission requires, by 2019, that energy billings shall be computed on the actual energy consumed. So, in the near future, all the trains shall be equipped with an energy measurement system, whose measurement accuracy should be assessed and periodically reverified, as required by EN 50463-2. As for every energy and power measuring system, the voltage and current transducers play a crucial role as their accuracy could determine the performance level of the entire measurement chain. To answer to this emerging need, this paper presents a calibration system allowing the accurate testing of dc voltage and current transducers, up to 6 kV and 300 A and up to 10 kHz. It is able to reproduce all the tests prescribed by EN 50463-2, but in order to characterize the transducers in actual operating conditions, a series of additional tests can also be performed using synthetic complex waveforms or even signals acquired on-board trains. The expanded uncertainty (level of confidence 95%) of the calibration system is 43 mu extV /V and 24 mu extA /A at dc and 520 mu extV /V and 820 mu extA /A at 10 kHz. Moreover, the calibration of two commercial voltage and current transducers, currently installed in the trains of an Italian operator, is presented
A Set-up for Static and Dynamic Characterization of Voltage and Current Transducers used in Railway Application
In the recent years, much more attention is paid to energy and power quality measurement in railway system. In both the case, the voltage and current transducers play a crucial role and their accuracy could determine the performance level of whole measurement system. To obtain reliable results, the accuracy of transducers should be tested with waveforms as close as possible to real working conditions. To assess the metrological characteristic of DC voltage and current transducers under real operating conditions, this paper presents a calibration set up able to generate up to 6 kV for DC voltage and up to 300 A for DC current. The system is able to generate complex and non-stationary test signals which go beyond the standard characterization procedures. Dynamic tests can be derived from real signals obtained from experimental data. For this aim, a specific software tool was developed and here it is presented
A simplified procedure for the accurate frequency response identification of voltage transformers
The paper proposes a simplified and affordable procedure for instrument transformers frequency characterization for medium voltage applications. It consists of a two steps measurement procedure, where both steps involve the generation of sine waves only, so that the it can be easily performed in instrument transformers calibration laboratories without requiring additional generation features. In the first step, a 50 Hz measurement of the Voltage Instrument Transformer ratio error at rated voltage is performed. The second step consists of a frequency sweep performed at low voltage up to the first resonance. By these two data sets, an approximated but accurate frequency response can be easily obtained using a non-linear fitted model. In the paper, a commercial voltage instrument transformer for medium voltage grids is characterized by the proposed method; results are shown and validated by comparison with a reference frequency characterization performed at INRIM under rated voltage. © IMEKO TC-4 2020
Synchronized Measurement System for Railway Application
In the light of the recent European directives that regulate railway networks in EU, in order to
implement the monitoring and controlling of the railways power supply network, an accurate and reliable
knowledge of the exchanged energy between the train and the railway grid is an essential task. Therefore, a
measurement system for railway applications must accurately evaluate energy and power quality. In order
to do this, the synchronization to a common time reference of all the measurement devices of the network
is mandatory. In this paper, a flexible measurement instrument for analysing different types of signals
that could be found in railway systems is presented. The proposed instrument has extreme flexibility
about the nature of input signals and it implements a synchronization technique to the absolute time via
Global Positioning System (GPS). The implementation of the measurement system, along with evaluation
of synchronization accuracy, is discussed
Power Quality Assessment in Railway Traction Supply Systems
The assessment of the power quality (PQ) could be a valuable tool to foster the efficiency of the railway systems. PQ is a well-addressed topic in conventional ac 50/60 Hz power systems, and many procedures, algorithms and measurement systems were presented in the international standards and widely discussed in the scientific literature. A less explored research field is the assessment of the PQ in the railway traction supply systems, in particular with reference to the dc and 16.7 Hz systems. The article explores this theme, proposing an extension of the definitions and of the standard measurement procedures for some of the main PQ indexes, well defined and widely used for conventional power systems, in order to be used also in all railway traction supply systems. The limits or difficulties of applicability are discussed with reference to measurements performed both on-board and in substation. The proposed procedures are applied to an experimental case of a real dc railway system with a large measurement campaign
Calibration System for DC Power/Energy Measurement chain in Railway applications
In order to guarantee the European interoperability of rolling stock, the European Union (EU) established that all the trains shall be equipped with an Energy Measurement Function (EMF) for billing purposes. The measurement accuracy of such devices should be assessed and periodically re-verified, as required by EN 50462-2. This paper describes a setup for the calibration of combined voltage and current transducers and EMFs for on-board Direct Current (DC) train installation. The reference system is able to generate an arbitrary DC phantom power up to 6 MW with voltage up to 5 kV and a current up to 1.2 kA. Furthermore, in order to perform tests as close as possible to real operating conditions, the system allows performing dynamic tests, reproducing waveforms obtained in real measurement campaigns. The computed uncertainty for steady state tests is 0.025%, whereas the target uncertainty for dynamic tests is 0.1%. The generation system can also be applied for on-board reverification of EMF
Calibration of Current Transformers in distorted conditions
In the context of modern power systems, where there are lots of non-linear loads and generators based on switching power electronics, the accurate measurement of voltage and current harmonics is a key task for the knowledge of the actual state of the network. Voltage and current transducers play a crucial role since they are always the first part of the measurement chain. Currently, classical voltage and current instrument transformers are the most installed transducers, but their performance not always is fully characterized in the presence of distorted waveforms. Therefore, in this paper a calibration setup for the accurate characterization of current transformers with distorted waveforms is presented. System implementation and characterization is presented; then it is employed for the evaluation of the performance of a commercial current transformer in distorted conditions
Novel Calibration systems for the dynamic and steady-state testing of digital instrument transformers
Within the frame of the European project 'Future Grid II-Metrology for the next-generation digital substation instrumentation', several partners developed traceable calibration systems which allow the calibration of conventional or non-conventional instrument transformers (IT) even with a sampled value (digital) output according to IEC 61869-9. Different setups are prepared to allow the calibration with complex test waveforms to emulate steady state, dynamic or temporary events during the assessment of the ITs. The laboratory calibration setups for either current transformers or voltage transformers are briefly described. Several results obtained for different kind of voltage or current transformers are presented
- …