High efficiency klystron for the SPS application

The enhancement of klystron efficiency through the use of collector depression, that is by recovering energy from the spent electron beam after microwave amplification, was investigated. Design considerations included noise, harmonics, cooling, and service life. The mod anode, to be employed for beam control, and the depressed collector, used in spent electron beam energy recovery, are described

Skylab mobile laboratory

The Skylab mobile laboratory was designed to provide the capability to obtain necessary data on the Skylab crewmen 30 days before lift-off, within 1 hour after recovery, and until preflight physiological baselines were reattained. The mobile laboratory complex consisted of six laboratories that supported cardiovascular, metabolic, nutrition and endocrinology, operational medicine, blood, and microbiology experiments; a utility package; and two shipping containers. The objectives and equipment requirements of the Skylab mobile laboratory and the data acquisition systems are discussed along with processes such as permanently mounting equipment in the individual laboratories and methods of testing and transporting the units. The operational performance, in terms of amounts of data collected, and the concept of mobile laboratories for medical and scientific experiments are evaluated. The Skylab mobile laboratory succeeded in facilitating the data collection and sample preservation associated with the three Skylab manned flights

Further results related to the turbulent boundary layer with slot injection of helium

Data from an experiment involving the slot injection of helium into a turbulent boundary layer in air are analyzed in terms of unconditioned and conditioned Favre-averages. The conditioning is based on two levels of helium concentration so that the contributions to the unconditioned statistics from air, helium, and mixture of these two gases can be determined. The distributions of intermittency associated with the two helium levels establish the domains of influence of air, helium, and mixture

High Speed Blanking: An Experimental Method to Measure Induced Cutting Forces

Lien vers la version éditeur: http://link.springer.com/article/10.1007/s11340-013-9738-1A new blanking process that involves punch speed up to 10 ms −1 has obvious advantages in increased productivity. However, the inherent dynamics of such a process makes it difficult to develop a practical high speed punch press. The fracture phenomenon governing the blanking process has to be well understood to correctly design the machine support and the tooling. To observe this phenomenon at various controlled blanking speeds a specific experimental device has been developed. The goal is to measure accurately the shear blanking forces imposed on the specimen during blanking. In this paper a new method allowing the blanking forces to be measured and taking into account the proposed test configuration is explained. This technique has been used to determine the blanking forces experienced when forming C40 steel and quantifies the effect of process parameters such as punch die clearance, punch speed, and sheet metal thickness on the blanking force evolution

GLAS 532nm Optical Detector

This report documents fabrication and testing of 532nm optical detectors. Testing procedures included 532nm quantum efficiency, detector gain, and photon counting performance, in particular, photon counting efficiency. 532nm quantum efficiency was measured to be 36% to 39% for the detectors fabricated. Detectors with a GaAs APD anode had measured gains of 12,000 to 15,000 maximum. Photon counting efficiency for the detector with an APD anode was measured to be approximately 80% with a detector gain of 11,000. Measurements made on an identical detector, not fabricated under this contract, had a photon counting efficiency exceeding 90% with a gain of 13,000. A formula is derived in which the photon counting efficiency is determined by the system preamp noise and the peak single photon pulse height which is proportional to detector gain. This formula agrees well with the measured results and indicates that a detector gain of 15,000 is sufficient to provide a counting efficiency of 99.6%

Progress toward cascade cells made by OM-VPE

Organometallic Vapor Phase Epitaxy (COM-VPE) was used to make a sophisticated monolithic cascade cell, with a peak AMO efficiency of 16.6%, not corrected for 14% grid coverage. The cell has 9 epitaxial layers. The top cell is 1.35 microns thick with a 0.1 micron thich emitter. Both cells are heteroface n-p structures. The cascade cell uses metal interconnects. Details of growth and processing are described

On-Farm Food Safety and Environmental Farm Plans: A Conceptual Framework for Identifying and Classifying Benefits and Costs

This series of six reports entitled: "On-Farm Food Safety and Environmental Farm Plans: Identifying and Classifying Benefits and Costs" was initiated soon after the launch of the Agricultural Policy Framework (APF) in 2002. The APF recognized the importance of food safety and environmental concerns for the future growth of the agriculture and Agri-food sector. For this reason, Agriculture and Agri-Food Canada (AAFC) commissioned this series of reports to develop a conceptual framework to strengthen our understanding of the potential benefit and cost implications of On-farm Food Safety (OFFS) and Environmental Farm Plans (EFP) that were key components of the APF. The reports were prepared by a group of academics with extensive knowledge of the agriculture and Agri-food sector and issues related to food safety, traceability and the environment. The first report presents a summary of the findings in the five main reports in the series. The second report presents the conceptual framework that was developed to help identify qualitatively the potential benefits and costs that the various players in the agriculture and agri-food supply chain would face in implementing OFFS and EFP programs. The third report applies this framework to pork, the fourth, to beef, the fifth, to grains and the sixth, to dairy. In general, benefits and costs are divided into both demand and supply side effects. In addition, both public and private costs and benefits are considered, especially since they help indicate where a role for government might be required and where markets are not working as well as they might. Based on these preliminary qualitative assessments, the beef and pork sector have more to gain from HACCP-based OFFS and EFP initiatives, due to their ability to gain market share from marketing their products internationally, while the grains sector already benefits internationally from its high quality reputation and the dairy sector is restricted to produce only for the domestic market. However, more work is required in these areas to validate and quantify costs and benefits.Agribusiness, Agricultural and Food Policy, Environmental Economics and Policy, Food Consumption/Nutrition/Food Safety, Production Economics, Resource /Energy Economics and Policy,

Chromosomal Location of Lectin Genes Indicates They Are Not the Basis of Rhizobium Strain Specificity Mutations Identified in Pea (Pisum sativum L.)

A lectin gene family is located on linkage group 7 in pea. The lectin genes are arranged as a cluster, with no recombination observed within the multigene family. A lectinlike cDNA clone, pEA207, and eight DNA fragments generated by random priming also were mapped in the region of the lectin genes. None of the known pea mutants altering Rhizobium leguminosarum strain specificity map to this region of the genome, and therefore their altered specificities appear not to be directly produced by mutations in the lectin gene