Stress distribution in a pressurised thick walled toroidal shell: a three dimensional analysis

An investigation is made into the state of stress in a closed toroidal shell of uniform thick-walled circular cross section, when loaded by uniform internal and external pressures. The general equations of the classical theory of elasticity, expressed in terms of stress components, are solved approximately by expanding the solutions in power series in a small parameter {R) (a is the external radius of the cross section and R the radius of the axis). This method was used (inter alia) by E. Gohner (1) in his investigation of the twist and pure bending of the sector of a circular ring. The first approximation yields the known solution of the problem of Lame for a thick walled cylinder. The equations for the higher approximations reduce to the problem of plane strain in a circular ring. Only the first three terms of the power series are calculated in this report. The convergence of the series is not investigated

Growth mechanisms of perturbations in boundary layers over a compliant wall

The temporal modal and nonmodal growth of three-dimensional perturbations in the boundary-layer flow over an infinite compliant flat wall is considered. Using a wall-normal velocity/wall-normal vorticity formalism, the dynamic boundary condition at the compliant wall admits a linear dependence on the eigenvalue parameter, as compared to a quadratic one in the canonical formulation of the problem. This greatly simplifies the accurate calculation of the continuous spectrum by means of a spectral method, thereby yielding a very effective filtering of the pseudospectra as well as a clear identification of instability regions. The regime of global instability is found to be matching the regime of the favorable phase of the forcing by the flow on the compliant wall so as to enhance the amplitude of the wall. An energy-budget analysis for the least-decaying hydroelastic (static-divergence, traveling-wave-flutter and near-stationary transitional) and Tollmien--Schlichting modes in the parameter space reveals the primary routes of energy flow. Moreover, the flow exhibits a slower transient growth for the maximum growth rate of a superposition of streamwise-independent modes due to a complex dependence of the wall-boundary condition with the Reynolds number. The initial and optimal perturbations are compared with the boundary-layer flow over a solid wall; differences and similarities are discussed. Unlike the solid-wall case, viscosity plays a pivotal role in the transient growth. A slowdown of the maximum growth rate with the Reynolds number is uncovered and found to originate in the transition of the fluid-solid interaction from a two-way to a one-way coupling. Finally, a term-by-term energy budget analysis is performed to identify the key contributors to the transient growth mechanism

Cervical spine injuries and collar complications in severely injured paediatric trauma patients

Study design:A retrospective registry review.Objectives:To determine the incidence of cervical spine (CS) injuries and collar complications in severely injured paediatric trauma patients.Setting:Regional Trauma Centre, Children\u27s Hospital.Methods:A retrospective review of 365 paediatric severe trauma patients (0-17 years), defined as an Injury Severity Score (ISS)≥12, admitted to the paediatric intensive care unit (PICU).Results:Clinically significant CS injuries occurred in 5% (n=18/365) of trauma patients, in 9% (n=13/149) of traumatic brain injury (TBI) patients and in 11% (n=6/56) of in-hospital trauma deaths. CS injuries were suspected before imaging in 33% (n=6/18) of patients based on either motor/sensory impairment or shock. CS injuries were deemed unstable in 61% (n=11/18) of patients. Patients with CS injuries had higher ISS, and longer PICU and hospital stays (P\u3c0.05). CS collar complications occurred in 10% of patients, mainly identified by day 6 and consisting of either erythema or ulcers. Patients with CS collar complications were older and more likely to have TBI, lower Glasgow Coma Scale (GCS) scores, longer PICU and hospital stays, and increased days to CS clearance (P\u3c0.05). Three CS X-rays, together with flexion/extension views, were used most frequently for CS clearance.Conclusion: CS injuries were prevalent in severely injured paediatric trauma patients, particularly in those with TBI and in nonsurvivors. CS collar complications were associated with a lower GCS and longer CS clearance times. Attention to CS collar management protocols and earlier CS clearance with computed tomography/magnetic resonance imaging in obtunded patients might reduce CS collar complications. © 2013 International Spinal Cord Society. All rights reserved

Cervical spine injuries and collar complications in severely injured paediatric trauma patients

Study design:A retrospective registry review.Objectives:To determine the incidence of cervical spine (CS) injuries and collar complications in severely injured paediatric trauma patients.Setting:Regional Trauma Centre, Children\u27s Hospital.Methods:A retrospective review of 365 paediatric severe trauma patients (0-17 years), defined as an Injury Severity Score (ISS)≥12, admitted to the paediatric intensive care unit (PICU).Results:Clinically significant CS injuries occurred in 5% (n=18/365) of trauma patients, in 9% (n=13/149) of traumatic brain injury (TBI) patients and in 11% (n=6/56) of in-hospital trauma deaths. CS injuries were suspected before imaging in 33% (n=6/18) of patients based on either motor/sensory impairment or shock. CS injuries were deemed unstable in 61% (n=11/18) of patients. Patients with CS injuries had higher ISS, and longer PICU and hospital stays (P\u3c0.05). CS collar complications occurred in 10% of patients, mainly identified by day 6 and consisting of either erythema or ulcers. Patients with CS collar complications were older and more likely to have TBI, lower Glasgow Coma Scale (GCS) scores, longer PICU and hospital stays, and increased days to CS clearance (P\u3c0.05). Three CS X-rays, together with flexion/extension views, were used most frequently for CS clearance.Conclusion: CS injuries were prevalent in severely injured paediatric trauma patients, particularly in those with TBI and in nonsurvivors. CS collar complications were associated with a lower GCS and longer CS clearance times. Attention to CS collar management protocols and earlier CS clearance with computed tomography/magnetic resonance imaging in obtunded patients might reduce CS collar complications. © 2013 International Spinal Cord Society. All rights reserved

Organic Weed Control and Cover Crop Residue Integration Impacts on Weed Control, Quality, Yield and Economics in Conservation Tillage Tomato-A Case Study

The increased adoption of conservation tillage and organic weed control practices in vegetable production requires more information on the role of various cover crops in integrated weed control, tomato quality, and yield. Two conservation-tillage systems utilizing crimson clover and cereal rye as winter cover crops were compared to a conventional black polythene mulch system, with or without organic weed management options, for weed control, tomato yield, and profitability. All cover crops were terminated with a mechanical roller/crimper prior to planting. Organic weed control treatments included: 1) flaming utilizing a one burner hand torch, 2) PRE application of corn gluten, 3) PRE application of corn gluten followed by flaming, or 4) intermittent hand weeding as needed. A non-treated control and a standard herbicide program were included for comparison. The herbicide program consisting of a PRE application of S-metolachlor (1.87 kg a.i./ha) followed by an early POST metribuzin (0.56 kg a.i. /ha) application followed by a late POST application of clethodim (0.28 kg a.i./ha). In general, high-residue clover and cereal rye cover crops provided substantial suppression of Palmer amaranth, large crabgrass, and yellow nutsedge. Across systems, minimum input in high-residue systems provided the highest net returns above variable costs compared to organic herbicide treatments that are costly and provide marginal benefit

The Decomposition of YBa₂Cu₃O₇₋δ Doped into Ba₂YRuO₆

One of the persistent criticisms of claims for observation of superconductivity in Ba2YRu1−uCuuO6 (O6) is that the diamagnetism is actually due to the decomposition of the material into YBa2Cu3O7−delta and other phases. We report a series of experiments in which YBa2Cu3O7−delta is doped into Ba2YRuO6 and carried through a series of sintering steps which were followed by magnetization, neutron diffraction, and scanning electron microscopy/microprobe measurements. It was found that the dopant YBa2Cu3O7−delta decomposed and failed to reform with cooling. It is concluded that the O6 phase is the stable high-temperature phase. The Cu released from the Y123 decomposition doped the host Ba2YRuO6, in partial substitution for Ru. This doping resulted in a small diamagnetic response with an onset temperature of ~84 K

Orchestrating learning activities using the CADMOS learning design tool

This paper gives an overview of CADMOS (CoursewAre Development Methodology for Open instructional Systems), a graphical IMS-LD Level A & B compliant learning design (LD) tool, which promotes the concept of “separation of concerns” during the design process, via the creation of two models: the conceptual model, which describes the learning activities and the corresponding learning resources, and the flow model, which describes the orchestration of these activities. According to the feedback from an evaluation case study with 36 participants, reported in this paper, CADMOS is a user-friendly tool that allows educational practitioners to design flows of learning activities using a layered approach

Rh-POP Pincer Xantphos Complexes for C-S and C-H Activation. Implications for Carbothiolation Catalysis

The neutral Rh­(I)–Xantphos complex [Rh­(κ³-_P,O,P-Xantphos)­Cl]_<i>n</i>, <b>4</b>, and cationic Rh­(III) [Rh­(κ³-_P,O,P-Xantphos)­(H)₂]­[BAr^F₄], <b>2a</b>, and [Rh­(κ³-_P,O,P-Xantphos-3,5-C₆H₃(CF₃)₂)­(H)₂]­[BAr^F₄], <b>2b</b>, are described [Ar^F = 3,5-(CF₃)₂C₆H₃; Xantphos = 4,5-bis­(diphenylphosphino)-9,9-dimethylxanthene; Xantphos-3,5-C₆H₃(CF₃)₂ = 9,9-dimethylxanthene-4,5-bis­(bis­(3,5-bis­(trifluoromethyl)­phenyl)­phosphine]. A solid-state structure of <b>2b</b> isolated from C₆H₅Cl solution shows a κ¹-chlorobenzene adduct, [Rh­(κ³-_P,O,P-Xantphos-3,5-C₆H₃(CF₃)₂)­(H)₂(κ¹-ClC₆H₅)]­[BAr^F₄], <b>3</b>. Addition of H₂ to <b>4</b> affords, crystallographically characterized, [Rh­(κ³-_P,O,P-Xantphos)­(H)₂Cl], <b>5</b>. Addition of diphenyl acetylene to <b>2a</b> results in the formation of the C–H activated metallacyclopentadiene [Rh­(κ³-_P,O,P-Xantphos)­(ClCH₂Cl)­(σ,σ-(C₆H₄)­C­(H)CPh)]­[BAr^F₄], <b>7</b>, a rare example of a crystallographically characterized Rh–dichloromethane complex, alongside the Rh­(I) complex <i>mer</i>-[Rh­(κ³-_P,O,P-Xantphos)­(η²-PhCCPh)]­[BAr^F₄], <b>6</b>. Halide abstraction from [Rh­(κ³-_P,O,P-Xantphos)­Cl]_<i>n</i> in the presence of diphenylacetylene affords <b>6</b> as the only product, which in the solid state shows that the alkyne binds perpendicular to the κ³-POP Xantphos ligand plane. This complex acts as a latent source of the [Rh­(κ³-_P,O,P-Xantphos)]⁺ fragment and facilitates <i>ortho</i>-directed C–S activation in a number of 2-arylsulfides to give <i>mer</i>-[Rh­(κ³-_P,O,P-Xantphos)­(σ,κ¹-Ar)­(SMe)]­[BAr^F₄] (Ar = C₆H₄COMe, <b>8</b>; C₆H₄(CO)­OMe, <b>9</b>; C₆H₄NO₂, <b>10</b>; C₆H₄CNCH₂CH₂O, <b>11</b>; C₆H₄C₅H₄N, <b>12</b>). Similar C–S bond cleavage is observed with allyl sulfide, to give <i>fac</i>-[Rh­(κ³-_P,O,P-Xantphos)­(η³-C₃H₅)­(SPh)]­[BAr^F₄], <b>13</b>. These products of C–S activation have been crystallographically characterized. For <b>8</b> in situ monitoring of the reaction by NMR spectroscopy reveals the initial formation of <i>fac</i>-κ³-<b>8</b>, which then proceeds to isomerize to the <i>mer</i>-isomer. With the <i>para</i>-ketone aryl sulfide, 4-SMeC ₆H₄COMe, C–H activation <i>ortho</i> to the ketone occurs to give <i>mer</i>-[Rh­(κ³-_P,O,P-Xantphos)­(σ,κ¹-4-(COMe)­C₆H₃SMe)­(H)]­[BAr^F₄], <b>14</b>. The temporal evolution of carbothiolation catalysis using <i>mer</i>-κ³-<b>8</b>, and phenyl acetylene and 2-(methylthio)­acetophenone substrates shows initial fast catalysis and then a considerably slower evolution of the product. We suggest that the initially formed <i>fac</i>-isomer of the C–S activation product is considerably more active than the <i>mer</i>-isomer (i.e., <i>mer</i>-<b>8</b>), the latter of which is formed rapidly by isomerization, and this accounts for the observed difference in rates. A likely mechanism is proposed based upon these data

Green and animal manure use in organic field crop systems

Dual-use cover/green manure (CGM) crops and animal manure are used to supply nitrogen (N) and phosphorus (P) to organically grown field crops. A comprehensive review of previous research was conducted to identify how CGM crops and animal manure have been used to meet N and P needs of organic field crops, and to identify knowledge gaps to direct future research efforts. Results indicate that: (a) CGM crops are used to provide N to subsequent cash crops in rotations; (b) CGM-supplied N generally can meet field crop needs in warm, humid regions but is insufficient for organic grain crops grown in cool and sub-humid regions; (c) adoption of conservation tillage practices can create or exacerbate N deficiencies; (d) excess N and P can result where animal manures are accessible if application rates are not carefully managed; and (e) integrating animal grazing into organic field crop systems has potential benefits but is generally not practiced. Work is needed to better understand the mechanisms governing the release of N by CGM crops to subsequent cash crops, and the legacy effects of animal manure applications in cool and sub-humid regions. The benefits and synergies that can occur by combining targeted animal grazing and CGMs on soil N, P, and other nutrients should be investigated. Improved communication and networking among researchers can aid efforts to solve soil fertility challenges faced by organic farmers when growing field crops in North America and elsewhere