1,356 research outputs found
Control of gamic and parthenogenetic reproduction in winged aphids by temperature and light
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/47588/1/438_2005_Article_BF01858205.pd
Order of embryonic determination of the differential features of gamic and parthenogenetic aphids
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/47589/1/438_2005_Article_BF01739699.pd
The effect of intensity and duration of light and of duration of darkness, partly modified by temperature, upon wing-production in aphids
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/47502/1/427_2005_Article_BF02272329.pd
NASA Advanced Explorations Systems: 2017 Advancements in Life Support Systems
The NASA Advanced Exploration Systems (AES) Life Support Systems (LSS) project strives to develop reliable, energy-efficient, and low-mass spacecraft systems to provide environmental control and life support systems (ECLSS) critical to enabling long duration human missions beyond low Earth orbit (LEO). Highly reliable, closed-loop life support systems are among the capabilities required for the longer duration human space exploration missions planned in the mid-2020s and beyond. The LSS Project is focused on four are-as-architecture and systems engineering for life support systems, environmental monitoring, air revitalization, and wastewater processing and water management. Starting with the International Space Station (ISS) LSS systems as a point of departure where applicable, the three-fold mission of the LSS Project is to address discrete LSS technology gaps, to improve the reliability of LSS systems, and to advance LSS systems toward integrated testing aboard the ISS. This paper is a follow on to the AES LSS development status reported in 2016 and provides additional details on the progress made since that paper was published with specific attention to the status of the Aerosol Sampler ISS Flight Experiment, the Spacecraft Atmosphere Monitor (SAM) Flight Experiment, the Brine Processor Assembly (BPA) Flight Experiment, the CO2 removal technology development tasks, and the work investigating the impacts of dormancy on LSS systems
NASA Advanced Explorations Systems: Advancements in Life Support Systems
The NASA Advanced Exploration Systems (AES) Life Support Systems (LSS) project strives to develop reliable, energy-efficient, and low-mass spacecraft systems to provide environmental control and life support systems (ECLSS) critical to enabling long duration human missions beyond low Earth orbit (LEO). Highly reliable, closed-loop life support systems are among the capabilities required for the longer duration human space exploration missions assessed by NASA's Habitability Architecture Team (HAT). The LSS project is focused on four areas: architecture and systems engineering for life support systems, environmental monitoring, air revitalization, and wastewater processing and water management. Starting with the international space station (ISS) LSS systems as a point of departure (where applicable), the mission of the LSS project is three-fold: 1. Address discrete LSS technology gaps 2. Improve the reliability of LSS systems 3. Advance LSS systems towards integrated testing on the ISS. This paper summarized the work being done in the four areas listed above to meet these objectives. Details will be given on the following focus areas: Systems Engineering and Architecture- With so many complex systems comprising life support in space, it is important to understand the overall system requirements to define life support system architectures for different space mission classes, ensure that all the components integrate well together and verify that testing is as representative of destination environments as possible. Environmental Monitoring- In an enclosed spacecraft that is constantly operating complex machinery for its own basic functionality as well as science experiments and technology demonstrations, it's possible for the environment to become compromised. While current environmental monitors aboard the ISS will alert crew members and mission control if there is an emergency, long-duration environmental monitoring cannot be done in-orbit as current methodologies rely largely on sending environmental samples back to Earth. The LSS project is developing onboard analysis capabilities that will replace the need to return air and water samples from space for ground analysis. Air Revitalization- The air revitalization task is comprised of work in carbon dioxide removal, oxygen generation and recovery and trace contamination and particulate control. The CO2 Removal and associated air drying development efforts under the LSS project are focused both on improving the current SOA technology on the ISS and assessing and examining the viability of other sorbents and technologies available in academia and industry. The Oxygen Generation and Recovery technology development area encompasses several sub-tasks in an effort to supply O2 to the crew at the required conditions, to recover O2 from metabolic CO2, and to recycle recovered O2 back to the cabin environment. Current state-of-the-art oxygen generation systems aboard space station are capable of generating or recovering approximately 40% of required oxygen; for exploration missions this percentage needs to be greatly increased. A spacecraft cabin trace contaminant and particulate control system serves to keep the environment below the spacecraft maximum allowable concentration (SMAC) for chemicals and particulates. Both passive (filters) and active (scrubbers) methods contribute to the overall TC & PC design. Work in the area of trace contamination and particulate control under the LSS project is focused on making improvements to the SOA TC & PC systems on ISS to improve performance and reduce consumables. Wastewater Processing and Water Management- A major goal of the LSS project is the development of water recovery systems to support long duration human exploration beyond LEO. Current space station wastewater processing and water management systems distill urine and wastewater to recover water from urine and humidity condensate in the spacecraft at a approximately 74% recovery rate. For longer, farther missions into deep space, that recovery rate must be greatly increased so that astronauts can journey for months without resupply cargo ships from Earth
Effect of long range forces on the interfacial profiles in thin binary polymer films
We study the effect of surface fields on the interfacial properties of a
binary polymer melt confined between two parallel walls. Each wall attracts a
different component of the blend by a non-retarded van der Waals potential. An
interface which runs parallel to the surfaces is stabilized in the center of
the film. Using extensive Monte Carlo simulations we study the interfacial
properties as a function of the film thickness, the strength of the surface
forces and the lateral size over which the profiles across the film are
averaged. We find evidence for capillary wave broadening of the apparent
interfacial profiles. However, the apparent interfacial width cannot be
described quantitatively by a simple logarithmic dependence on the film
thickness. The Monte Carlo simulations reveal that the surface fields give rise
to an additional reduction of the intrinsic interfacial width and an increase
of the effective interfacial tension upon decreasing the film thickness. These
modifications of the intrinsic interfacial properties are confirmed by
self-consistent field calculations. Taking account of the thickness dependence
of the intrinsic interfacial properties and the capillary wave broadening, we
can describe our simulation results quantitatively.Comment: to appear in J.Chem.Phy
The Metagalactic Ionizing Radiation Field at Low Redshift
We compute the ionizing radiation field at low redshift, arising from
Seyferts, QSOs, and starburst galaxies. This calculation combines recent
Seyfert luminosity functions, extrapolated ultraviolet fluxes from our IUE-AGN
database, and a new intergalactic opacity model based on Hubble Space Telescope
and Keck Ly-alpha absorber surveys. At z = 0 for AGN only, our best estimate
for the specific intensity at 1 Ryd is I_0 = 1.3 (+0.8/-0.5) x 10^-23
ergs/cm^2/s/Hz/sr, independent of H_0, Omega_0, and Lambda. The one-sided
ionizing photon flux is Phi_ion = 3400 (+2100/-1300) photons/cm^2/s, and the H
I photoionization rate is Gamma_HI = 3.2 (+2.0/-1.2) x 10^-14 s^-1 for alpha_s
= 1.8. We also derive Gamma_ HI for z = 0 - 4. These error ranges reflect
uncertainties in the spectral indexes for the ionizing EUV (alpha_s = 1.8 +/-
0.3) and the optical/UV (alpha_UV = 0.86 +/- 0.05), the IGM opacity model, the
range of Seyfert luminosities (0.001 - 100 L*) and the completeness of the
luminosity functions. Our estimate is a factor of three lower than the most
stringent upper limits on the ionizing background (Phi_ion < 10^4
photons/cm^2/s) obtained from H-alpha observations in external clouds, and it
lies within the range implied by other indirect measures. Starburst galaxies
with a sufficiently large Lyman continuum escape fraction, f_ esc > 0.05, may
provide a comparable background to AGN, I_0 (z=0) = 1.1 (+1.5/-0.7) x 10^{-23).
An additional component of the ionizing background of this magnitude would
violate neither upper limits from H-alpha observations nor the acceptable range
from other measurements.Comment: 30 pages, 9 figures, accepted for Astronomical J. (Oct. 1999
Diblock copolymers at a homopolymer-homopolymer-interface: a Monte Carlo simulation
The properties of diluted symmetric A-B diblock copolymers at the interface
between A and B homopolymer phases are studied by means of Monte Carlo (MC)
simulations of the bond fluctuation model. We calculate segment density
profiles as well as orientational properties of segments, of A and B blocks,
and of the whole chain. Our data support the picture of oriented ``dumbbells'',
which consist of mildly perturbed A and B Gaussian coils. The results are
compared to a self consistent field theory (SCFT) for single copolymer chains
at a homopolymer interface. We also discuss the number of interaction contacts
between monomers, which provide a measure for the ``active surface'' of
copolymers or homopolymers close to the interface
A polarized neutron-scattering study of the Cooper-pair moment in Sr2RuO4
We report a study of the magnetization density in the mixed state of the
unconventional superconductor S2RuO4. On entering the superconducting state we
find no change in the magnitude or distribution of the induced moment for a
magnetic field of 1 Tesla applied within the RuO2 planes. Our results are
consistent with a spin-triplet Cooper pairing with spins lying in the basal
plane. This is in contrast with similar experiments performed on conventional
and high-Tc superconductors.Comment: Submitted to Physical Review Letter
- …