Convection and chemistry effects in CVD: A 3-D analysis for silicon deposition

The computational fluid dynamics code FLUENT has been adopted to simulate the entire rectangular-channel-like (3-D) geometry of an experimental CVD reactor designed for Si deposition. The code incorporated the effects of both homogeneous (gas phase) and heterogeneous (surface) chemistry with finite reaction rates of important species existing in silane dissociation. The experiments were designed to elucidate the effects of gravitationally-induced buoyancy-driven convection flows on the quality of the grown Si films. This goal is accomplished by contrasting the results obtained from a carrier gas mixture of H2/Ar with the ones obtained from the same molar mixture ratio of H2/He, without any accompanying change in the chemistry. Computationally, these cases are simulated in the terrestrial gravitational field and in the absence of gravity. The numerical results compare favorably with experiments. Powerful computational tools provide invaluable insights into the complex physicochemical phenomena taking place in CVD reactors. Such information is essential for the improved design and optimization of future CVD reactors

Parameterization of solar cells

The aggregation (sorting) of the individual solar cells into an array is commonly based on a single operating point on the current-voltage (I-V) characteristic curve. An alternative approach for cell performance prediction and cell screening is provided by modeling the cell using an equivalent electrical circuit, in which the parameters involved are related to the physical phenomena in the device. These analytical models may be represented by a double exponential I-V characteristic with seven parameters, by a double exponential model with five parameters, or by a single exponential equation with four or five parameters. In this article we address issues concerning methodologies for the determination of solar cell parameters based on measured data points of the I-V characteristic, and introduce a procedure for screening of solar cells for arrays. We show that common curve fitting techniques, e.g., least squares, may produce many combinations of parameter values while maintaining a good fit between the fitted and measured I-V characteristics of the cell. Therefore, techniques relying on curve fitting criteria alone cannot be directly used for cell parameterization. We propose a consistent procedure which takes into account the entire set of parameter values for a batch of cells. This procedure is based on a definition of a mean cell representing the batch, and takes into account the relative contribution of each parameter to the overall goodness of fit. The procedure is demonstrated on a batch of 50 silicon cells for Space Station Freedom

Processing asymmetry of transitions between order and disorder in human auditory cortex

Purpose: To develop an algorithm to resolve intrinsic problems with dose calculations using pencil beams when particles involved in each beam are overreaching a lateral density interface or when they are detouring in a laterally heterogeneous medium. Method and Materials: A finding on a Gaussian distribution, such that it can be approximately decomposed into multiple narrower, shifted, and scaled ones, was applied to dynamic splitting of pencil beams implemented in a dose calculation algorithm for proton and ion beams. The method was tested in an experiment with a range-compensated carbon-ion beam. Its effectiveness and efficiency were evaluated for carbon-ion and proton beams in a heterogeneous phantom model. Results: The splitting dose calculation reproduced the detour effect observed in the experiment, which amounted to about 10% at a maximum or as large as the lateral particle-disequilibrium effect. The proton-beam dose generally showed large scattering effects including the overreach and detour effects. The overall computational times were 9 s and 45 s for non-splitting and splitting carbon-ion beams and 15 s and 66 s for non-splitting and splitting proton beams. Conclusions: The beam-splitting method was developed and verified to resolve the intrinsic size limitation of the Gaussian pencil-beam model in dose calculation algorithms. The computational speed slowed down by factor of 5, which would be tolerable for dose accuracy improvement at a maximum of 10%, in our test case.AAPM Annual Meeting 200

Human Auditory cortical processing of changes in interaural correlation

Sensitivity to the similarity of the acoustic waveforms at the two ears, and specifically to changes in similarity, is crucial to auditory scene analysis and extraction of objects from background. Here, we use the high temporal resolution of magnetoencephalography to investigate the dynamics of cortical processing of changes in interaural correlation, a measure of interaural similarity, and compare them with behavior. Stimuli are interaurally correlated or uncorrelated wideband noise, immediately followed by the same noise with intermediate degrees of interaural correlation. Behaviorally, listeners' sensitivity to changes in interaural correlation is asymmetrical. Listeners are faster and better at detecting transitions from correlated noise than transitions from uncorrelated noise. The cortical response to the change in correlation is characterized by an activation sequence starting from ∼50 ms after change. The strength of this response parallels behavioral performance: auditory cortical mechanisms are much less sensitive to transitions from uncorrelated noise than from correlated noise. In each case, sensitivity increases with interaural correlation difference. Brain responses to transitions from uncorrelated noise lag those from correlated noise by ∼80 ms, which may be the neural correlate of the observed behavioral response time differences. Importantly, we demonstrate differences in location and time course of neural processing: transitions from correlated noise are processed by a distinct neural population, and with greater speed, than transitions from uncorrelated noise

Modification of the ECAS reference steam power generating plant to comply with the EPA 1979 new source performance standards

Detailed capital cost estimates for the ECAS and modified reference plants in mid-1978 dollars for both 250 and 175 F (394 and 353 K) stack gas reheat temperatures based on the cost estimates developed for the ECAS study are presented. The scope of the work included technical assessment of sulfur dioxide scrubber system design, on site calcination versus purchased lime, reheat of stack gas, effect of sulfur dioxide scrubber on particulate emission, and control of nitrogen oxides

MHD oxidant intermediate temperature ceramic heater study

The use of three types of directly fired ceramic heaters for preheating oxygen enriched air to an intermediate temperature of 1144K was investigated. The three types of ceramic heaters are: (1) a fixed bed, periodic flow ceramic brick regenerative heater; (2) a ceramic pebble regenerative heater. The heater design, performance and operating characteristics under conditions in which the particulate matter is not solidified are evaluated. A comparison and overall evaluation of the three types of ceramic heaters and temperature range determination at which the particulate matter in the MHD exhaust gas is estimated to be a dry powder are presented

Degloving injuries and flap viability assessment

Degloving injuries are associated with major morbidity. The management of these injuries is still not resolved. The method of management used by the authors involves the harvesting of split skin from the surface of the flap and assessment of flap viability based on surface dennal capillary bleeding. The skin grafts are then used to cover denuded areas. This technique has proved to be effective, time-saving and morbidity-reducing in the cases reviewed here and in recent publications.The issue addressed in this trial was the effect of partial de-epithelialisation on the survival length of a flap. Two groups of dorsal rat flaps were compared. In one group, the flaps were raised and restitched after a period of time and in the second group, the surfaces of identical flaps were partially de-epithelialised and then restitched. The survival length of these flaps was compared, as well as the metabolic responses to surgery in the two groups. No statistically significant differences were found in these 2 groups. It was concluded that partial de-epithelialisation did not have a detrimental effect on duration of flap length survival, thus encouraging the continued use of the clinical technique described above in the handling of degloving injuries

Screening of solar cells

Because solar cells in a production batch are not identical, screening is performed to obtain similar cells for aggregation into arrays. A common technique for screening is based on a single operating point of the I-V characteristic of the cell, usually the maximum power point. As a result, inferior cell matching may occur at the actual operating points. Screening solar cells based on the entire I-V characteristic will inherently result in more similar cells in the array. An array consisting of more similar cells is likely to have better overall characteristics and more predictable performance. Solar cell screening methods and cell ranking are discussed. The concept of a mean cell is defined as a cell 'best' representing all the cells in the production batch. The screening and ranking of all cells are performed with respect to the mean cell. The comparative results of different screening methods are illustrated on a batch of 50 silicon cells of the Space Station Freedom

Collision induced decomposition of peptides. Choice of collision parameters

Collision-induced dissociation product ion spectra of a series of doubly charged tryptic peptide ions produced by electrospray ionization were obtained by triple-quadrupole tandem mass spectrometry. The sequence information content of the product ion spectra was explored as a function of collision energy and collision-cell gas pressure for parent ions with molecular masses ranging from 300 to 2000 u. The energy range (at a given pressure) in which the degree of fragmentation is acceptable was found to be narrow for parent ions of a given mass, and the optimal collision energy was observed to exhibit a strong linear correlation with parent ion mass. This observed correlation opens the way for on-line software-controled selection of optimal mass spectrometric conditions in the enzymatic digestion-liquid chromatography-tandem mass spectrometric strategy of amino acid sequencing of proteins