293 research outputs found

    The efficiency and the demagnetization field of a general Halbach cylinder

    Get PDF
    The maximum magnetic efficiency of a general multipole Halbach cylinder of order pp is found as function of pp. The efficiency is shown to decrease for increasing absolute value of pp. The optimal ratio between the inner and outer radius, i.e. the ratio resulting in the most efficient design, is also found as function of pp and is shown to tend towards smaller and smaller magnet sizes. Finally, the demagnetizing field in a general pp-Halbach cylinder is calculated, and it is shown that demagnetization is largest either at cos2pϕ=1\cos 2p\phi=1 or cos2pϕ=1\cos 2p\phi=-1. For the common case of a p=1p=1 Halbach cylinder the maximum values of the demagnetizing field is either at ϕ=0,π\phi = 0,\pi at the outer radius, where the field is always equal to the remanence, or at ϕ=±π/2\phi = \pm \pi/2 at the inner radius, where it is the magnitude of the field in the bore. Thus to avoid demagnetization the coercivity of the magnets must be larger than these values.Comment: 5 pages, 5 figure

    Topology optimized permanent magnet systems

    Get PDF
    Topology optimization of permanent magnet systems consisting of permanent magnets, high permeability iron and air is presented. An implementation of topology optimization for magnetostatics is discussed and three examples are considered. First, the Halbach cylinder is topology optimized with iron and an increase of 15% in magnetic efficiency is shown, albeit with an increase of 3.8 pp. in field inhomogeneity - a value compared to the inhomogeneity in a 16 segmented Halbach cylinder. Following this a topology optimized structure to concentrate a homogeneous field is shown to increase the magnitude of the field by 111% for the chosen dimensions. Finally, a permanent magnet with alternating high and low field regions is considered. Here a Λcool\Lambda_\mathrm{cool} figure of merit of 0.472 is reached, which is an increase of 100% compared to a previous optimized design.Comment: 10 pages, 10 figure

    A thermoelectric power generating heat exchanger: Part I - Experimental realization

    Get PDF
    An experimental realization of a heat exchanger with commercial thermoelectric generators (TEGs) is presented. The power producing capabilities as a function of flow rate and temperature span are characterized for two different commercial heat transfer fluids and for three different thermal interface materials. The device is shown to produce 2 W per TEG or 0.22 W cm2^{-2} at a fluid temperature difference of 175 ^\circC and a flow rate per fluid channel of 5 L min1^{-1}. One experimentally realized design produced 200 W in total from 100 TEGs. For the design considered here, the power production is shown to depend more critically on the fluid temperature span than on the fluid flow rate. Finally, the temperature span across the TEG is shown to be 55% to 75% of the temperature span between the hot and cold fluids.Comment: 9 pages, 11 figure

    Determining the minimum mass and cost of a magnetic refrigerator

    Get PDF
    An expression is determined for the mass of the magnet and magnetocaloric material needed for a magnetic refrigerator and these are determined using numerical modeling for both parallel plate and packed sphere bed regenerators as function of temperature span and cooling power. As magnetocaloric material Gd or a model material with a constant adiabatic temperature change, representing a infinitely linearly graded refrigeration device, is used. For the magnet a maximum figure of merit magnet or a Halbach cylinder is used. For a cost of \$40 and \$20 per kg for the magnet and magnetocaloric material, respectively, the cheapest 100 W parallel plate refrigerator with a temperature span of 20 K using Gd and a Halbach magnet has 0.8 kg of magnet, 0.3 kg of Gd and a cost of \$35. Using the constant material reduces this cost to \$25. A packed sphere bed refrigerator with the constant material costs \$7. It is also shown that increasing the operation frequency reduces the cost. Finally, the lowest cost is also found as a function of the cost of the magnet and magnetocaloric material.Comment: 12 pages, 10 figure

    Clinical Decision Making of Nurses Working in Hospital Settings

    Get PDF
    This study analyzed nurses' perceptions of clinical decision making (CDM) in their clinical practice and compared differences in decision making related to nurse demographic and contextual variables. A cross-sectional survey was carried out with 2095 nurses in four hospitals in Norway. A 24-item Nursing Decision Making Instrument based on cognitive continuum theory was used to explore how nurses perceived their CDM when meeting an elective patient for the first time. Data were analyzed with descriptive frequencies, t-tests, Chi-Square test, and linear regression. Nurses' decision making was categorized into analytic-systematic, intuitive-interpretive, and quasi-rational models of CDM. Most nurses reported the use of quasi-rational models during CDM thereby supporting the tenet that cognition most often includes properties of both analysis and intuition. Increased use of intuitive-interpretive models of CDM was associated with years in present job, further education, male gender, higher age, and working in predominantly surgical units

    Band gap engineering by Bi intercalation of graphene on Ir(111)

    Get PDF
    We report on the structural and electronic properties of a single bismuth layer intercalated underneath a graphene layer grown on an Ir(111) single crystal. Scanning tunneling microscopy (STM) reveals a hexagonal surface structure and a dislocation network upon Bi intercalation, which we attribute to a 3×3R30deg\sqrt{3}\times\sqrt{3}R30{\deg} Bi structure on the underlying Ir(111) surface. Ab-initio calculations show that this Bi structure is the most energetically favorable, and also illustrate that STM measurements are most sensitive to C atoms in close proximity to intercalated Bi atoms. Additionally, Bi intercalation induces a band gap (Eg=0.42E_g=0.42\,eV) at the Dirac point of graphene and an overall n-doping (0.39\sim 0.39\,eV), as seen in angular-resolved photoemission spectroscopy. We attribute the emergence of the band gap to the dislocation network which forms favorably along certain parts of the moir\'e structure induced by the graphene/Ir(111) interface.Comment: 5 figure
    corecore