Wave propagation over a beach within a nonlinear theory

Wave propagation over a beach is considered within a nonlinear theory in shallow water. Lagrangian coordinates are used to describe the problem. The solution is expanded in double series involving a small parameter and local oscillations. Two cases are treated: The beach with appreciable inclination on the horizontal (cliff) and the beach of small inclination. We show that finite solutions are obtained, in contrast to the linear theory which involves a logarithmic singularity at the shoreline. For the cliff, it is shown that local oscillations do not appear in the first two orders of approximation, and the incident wave is totally reflected without loss of energy at this order of approximation. The case of an incident wave on the beach is considered. The deformation of this wave is investigated and explicit formulae are obtained for the reflected wave and for the local oscillations, to shed light on the energy transfer due to interaction with the beach

Subsequent Fertility of Goats with Prenatal Mortality Diagnosed by Ultrasound and Treated by PGF 2 α

Thirteen Saanen and Saanen crossbred female goats, between the ages of 6 months and 7, years were presented to the clinic, College of Veterinary Medicine, Sudan University of Science and Technology, for sonographic pregnancy diagnosis. Transabdominal ultrasound was performed using 3.5 MHz probe which revealed non-viable fetuses as judged by absence of heart beats and movements. Twelve goats were given single i/m injection of PGF2α analogue and 5% oxytetracycline. Ten goats responded to the treatment and six of them became pregnant and gave birth within the normal gestational period. One goat was diagnosed as non-pregnant, one goat developed hydrometra, and the subsequent fertility of two goats was unknown. Two full-term goats did not respond to treatment. Another dose of PGF2α was administered to them and again they did not respond. Manual attempts were done to deliver the full-term goat with dilated cervix and they were unsuccessful. Cesarean section and hysterectomy were then performed for the three full-term goats with unfavorable outcome. It can be concluded that ultrasound is a rapid, reliable, and nonhazardous procedure for the diagnosis of fetal mortality in goats and PGF2α treatment in conjunction with oxytetracycline is an efficient treatment

Structure of the Deformed 7075 Aircraft Al - Alloy with Material Analysis Using Diffraction (MAUD)

This work aims to study the effect of plastic deformation on the 7075 Al - alloy using Material Analyses Using Diffraction (MAUD). Plastic deformation produces dislocation defects. Using a hydraulic press, samples were deformed up to 25%. The XRD was measured for each degree of deformation. The MAUD program was used to analyze the data, and mathematical methods were deployed to understand the various behaviors observed. The lattice parameter, crystallite size, average internal stress, micro-strain, and dislocation density of the 7075Al-alloy were calculated. As the deformation degree increased, there was a progressive decline in the crystallite size as an increase in the micro-strain and dislocation density. The flow stress changes from 5.8 to 49 MPa and the stored dislocation energy varies from 2.62 to 185 kPa

Formulation, evaluation and optimization of miconazole nitrate tablet prepared by foam granulation technique

The aim of our study was to utilize novel foam granulation technique in formulation of miconazole nitrate; a model hydrophobic drug as oral disintegrating tablets "ODT" particularly to enhance its bioavailability. Foam granulation technique has additional advantages over the other traditional granulation technique since; it enhances the granulation process and produce acceptable tablets. Fractional factorial design was used to investigate the effect of formulation and processing variables on the prepared miconazole ODT. The prepared granules were evaluated by measuring their density, flowability, granules size and shape, and granules wetting time. The quality attributes of the prepared tablets; drug content, tablet thickness, uniformity of weight, tablet tensile strength, friability, disintegration, and dissolution were also evaluated. The results indicated that, the prepared granules showed acceptable characteristics and is significantly affected by the disintegrant type, urea concentration, and the lubricant type. The quality attributes of the tablets were not affected by the processing parameters. From the prepared formulas; F20, F19, F12, and F20 displayed 18, 35, 35, and 40 seconds disintegration time respectively and the percent of dissolution after 15 minutes ranged from 94.4-100%. These results ascertained that foam granulation technique fulfill the requirement in preparation of miconazole ODT. Key words: miconazole nitrate, foam granulation, oral disintegrating tablet

Study of the Optical Properties of Zno Nano-structure at Different Ti Content

Zinc oxide (ZnO) and TZO samples having different Ti content were synthesized from doping to composite by Citrate sol-gel method (dissolving and react with citric acid) characterized according to their optical properties. The UV - vis characterization exhibiting good optical properties. The results show there are one absorption edge at pure and low Ti doping but at higher Ti% another edge appeared and slightly shifted around 400 nm. The maximum absorption nearly at 350 nm, and the band gap energy of Ti-doped ZnO increase from 3.16 to 3.20 eV achieving a blue-shift. A red shift from 3.07 to 3.19 eV in the visible range which has a very important application, this improves the optical properties of ZnO and gives an indication how to tune its band gap (increase or decrease by doping or composition)

Formulation, evaluation and optimization of miconazole nitrate tablet prepared by foam granulation technique

The aim of our study was to utilize novel foam granulation technique in formulation of miconazole nitrate; a model hydrophobic drug as oral disintegrating tablets "ODT" particularly to enhance its bioavailability. Foam granulation technique has additional advantages over the other traditional granulation technique since; it enhances the granulation process and produce acceptable tablets. Fractional factorial design was used to investigate the effect of formulation and processing variables on the prepared miconazole ODT. The prepared granules were evaluated by measuring their density, flowability, granules size and shape, and granules wetting time. The quality attributes of the prepared tablets; drug content, tablet thickness, uniformity of weight, tablet tensile strength, friability, disintegration, and dissolution were also evaluated. The results indicated that, the prepared granules showed acceptable characteristics and is significantly affected by the disintegrant type, urea concentration, and the lubricant type. The quality attributes of the tablets were not affected by the processing parameters. From the prepared formulas; F20, F19, F12, and F20 displayed 18, 35, 35, and 40 seconds disintegration time respectively and the percent of dissolution after 15 minutes ranged from 94.4-100%. These results ascertained that foam granulation technique fulfill the requirement in preparation of miconazole ODT. Key words: miconazole nitrate, foam granulation, oral disintegrating tablet

The solvation and dissociation of 4-benzylaniline hydrochloride in chlorobenzene

A reaction scheme is proposed to account for the liberation of 4-benzylaniline from 4-benzylaniline hydrochloride, using chlorobenzene as a solvent at a temperature of 373 K. Two operational regimes are explored: “closed” reaction conditions correspond to the retention of evolved hydrogen chloride gas within the reaction medium, whereas an “open” system permits gaseous hydrogen chloride to be released from the reaction medium. The solution phase chemistry is analyzed by 1H NMR spectroscopy. Complete liberation of solvated 4-benzylaniline from solid 4-benzylaniline hydrochloride is possible under “open” conditions, with the entropically favored conversion of solvated hydrogen chloride to the gaseous phase thought to be the thermodynamic driver that effectively controls a series of interconnecting equilibria. A kinetic model is proposed to account for the observations of the open system

The Positron and Mechanical Parameters of a Cold-Worked Aluminum Alloy (3004) Using PALT, PADBT and HV

In the present work, the influence of plastic deformation on the properties of a 3004 Al-alloy was studied with different techniques. Crystallite size, dislocation density, defect density, micro-strain, and stored dislocation energy are presented and compared for different three techniques. Methodology: Many techniques for detecting defects have been developed, such as the positron annihilation lifetime technique (PALT), the positron annihilation Doppler broadening technique (PADBT), and the Vickers hardness test (HV). Implications: The positron mean lifetime value of a non-deformed sample is 173±4.8 ps, which increases until the thickness reduction reaches a 10% deformation then saturated at saturation trapping of the positron in defect states with a mean of 221±5 ps. At an S-parameter of 0.3709±0.0031, a W-parameter of 0.5885±0.0057 was obtained at zero deformation: this decreases until saturation at 10% deformation. Findings: A good correlation between the three techniques is observed for mean crystallite size. A good correlation was also noted between PALT and PADBT from 0 to 10% thickness reduction. HV has good correlations with PALT and PADBT from 0 to 6% thickness reduction: then a clear difference was found from 6 to 15% thickness reduction. Originality: such results confirm the fact that the used technique can effects on the obtained results in some limitations. © 2021 Ahmed Mostafa et al., published by De Gruyter