Cooling of a Nanomechanical Resonator in the Presence of a Single Diatomic Molecule

We propose a theoretical scheme for coupling a nanomechanical resonator to a single diatomic molecule via microwave cavity mode of a driven LC resonator. We describe the diatomic molecule by a Morse potential and find the corresponding equations of motion of the hybrid system by using Fokker-Planck formalism. Analytical expressions for the effective frequency and the effective damping of the nanomechanical resonator are obtained. We analyze the ground state cooling of the nanomechanical resonator in presence of the diatomic molecule. The results confirm that presence of the molecule improves the cooling process of the mechanical resonator. Finally, the effect of molecule's parameters on the cooling mechanism is studied.Comment: 10 pages, 8 figure

Generating quantum discord between two distant Bose-Einstein condensates with Bell-like detection

We propose a technique that enables the creation of quantum discord between two distant nodes, each containing a cavity consist of the Bose-Einstein condensate, by applying a non-ideal Bell-like detection on the output modes of optical cavities. We find the covariance matrix of the system after the non-ideal Bell-like detection, showing explicitly that one enables manipulation of the quantum correlations, and particularly quantum discord, between remote Bose-Einstein condensates. We also find that the non-ideal Bell-like detection can create entanglement between distant Bose-Einstein condensates at the two remote site

Mutual information as an order parameter for quantum synchronization

Spontaneous synchronization is a fundamental phenomenon, important in many theoretical studies and applications. Recently this effect has been analyzed and observed in a number of physical systems close to the quantum mechanical regime. In this work we propose the mutual information as a useful order parameter which can capture the emergence of synchronization in very different contexts, ranging from semi-classical to intrinsically quantum mechanical systems. Specifically we first study the synchronization of two coupled Van der Pol oscillators in both classical and quantum regimes and later we consider the synchronization of two qubits inside two coupled optical cavities. In all these contexts, we find that mutual information can be used as an appropriate figure of merit for determining the synchronization phases, independently of the specific details of the system

Processing and performance of compounds based on emulsion/solution SBRs

Solution and emulstion SBRs are both widely used in tire industry. But which method offers the industry the best solution

Modeling and Control of a Smart Single-Layer Graphene Sheet

In this study, a smart single-layer graphene sheet (SLGS) is analytically modeled and its buckling is controlled using coupled polyvinylidene fluoride (PVDF) nanoplates. A voltage is applied to the PVDF nanoplate in thickness direction in order to control the critical load of the SLGS. Electric potential distribution is assumed as a combination of a half-cosine and linear variation in order to satisfy the Maxwell equation. The exact analysis is performed for the case when all four ends are simply supported and in free electrical boundary condition. The nonlocal governing equations are derived through Hamilton’s principle and energy method based on a nonlocal Mindlin plate theory. The detailed mathematical derivations are presented and numerical investigations are performed, while the emphasis is placed on investigating the effect of several parameters such as small-scale coefficient, stiffness of the internal elastic medium, graphene length, mode number, and external electric voltage on the buckling smart control of the SLGS in detail. It is explicitly shown that the imposed external voltage is an effective controlling parameter for buckling of the SLGS. Numerical results are presented to serve as benchmarks for design and smart control of nanodevices

Job Involvement and Organizational Commitment of Employees of Prehospital Emergency Medical System

Background: Several studies are available on organizational commitment of employees in different organizations. However, the organizational commitment and job involvement of the employees in the prehospital emergency medical system (PEMS) of Iran have largely been ignored. Objectives: This study aimed to investigate the organizational commitment and job involvement of the employees of PEMS and the relationship between these two issues. Materials and Methods: This cross-sectional study was conducted on 160 employees of Kashan PEMS who were selected through a census method in 2014. A 3-part instrument was used in this study, including a demographic questionnaire, the Allen and Miller’s organizational commitment inventory, and the Lodahl and Kejner’s job involvement inventory. We used descriptive statistics, Spearman correlation coefficient, Kruskal-Wallis, Friedman, analysis of variance, and Tukey post hoc tests to analyze the data. Results: The mean job involvement and organizational commitment scores were 61.78 ± 10.69 and 73.89 ± 13.58, respectively. The mean scores of job involvement and organizational commitment were significantly different in subjects with different work experiences (P = 0.043 and P = 0.012, respectively). However, no significant differences were observed between the mean scores of organizational commitment and job involvement in subjects with different fields of study, different levels of interest in the profession, and various educational levels. A direct significant correlation was found between the total scores of organizational commitment and job involvement of workers in Kashan PEMS (r = 0.910, P < 0.001). Conclusions: This study showed that the employees in the Kashan PEMS obtained half of the score of organizational commitment and about two-thirds of the job involvement score. Therefore, the higher level managers of the emergency medical system are advised to implement some strategies to increase the employees’ job involvement and organizational commitment

Applying job hazard analysis and William Fine methods on risks identification and assessment of jobs in hot rolling steel, Iran

Background and purpose: Comprehensive evaluation of jobs in industries is a practical and effective method that could identify the jobs and industries with negative effects on the environment. This study identified environmental hazards of hot rolling process and assessing their risks. Materials and methods: An observational study was carried out in which identification of human activity and job’s risks in production hall of Kavir Steel Complex was done according to ISO 14001 approaches (pollutant emissions to air, discharges to water, energy consumption, energy released as heat, wastes, side products, etc) by Job Hazard Analysis method (JHA). Then the risks identified were prioritized and assessed using William Fine method. Results: We identified 205 environmental hazards (in 9 groups) associated with production personnel (n= 81), mechanics and maintenance personnel (n= 44), bed personnel (n= 9), personnel of cleaning services (n= 33), and water plant personnel (n= 38). The highest and lowest rate of risks were due to creation and distribution of wastes (n= 73) and corrosion and depreciation of equipment, (n= 1), respectively. Conclusion: The production personnel were mainly responsible for environmental emissions. The leading causes were stress and anxiety about stoppage of production, payment reduction, and lack of awareness and workers and supervisors on environmental issues. © 2017, Mazandaran University of Medical Sciences. All rights reserved

Electro-Thermo-Mechanical Vibration Analysis of a Foam-Core Smart Composite Cylindrical Shell Containing Fluid

ABSTRACT In this study, free vibration of a foam-core orthotropic smart composite cylindrical shell (SCCS) filled with a non-viscous compressible fluid, subjected to combined electro-thermo-mechanical loads is investigated. Piezoelectric polymeric cylindrical shell, is made from polyvinylidene fluoride (PVDF) and reinforced by armchair double walled boron nitride nanotubes (DWBNNTs). Characteristics of the equivalent composite are determined using micro-electro-mechanical models. The poly ethylene (PE) foam-core is modeled based on Winkler and Pasternak foundations. Employing the charge equation for coupling electrical and mechanical fields, the problem is turned into an eigenvalue one, for which analytical frequency equations are derived considering free electrical and simply supported mechanical boundary conditions at circular surfaces at either ends of the cylindrical shell. The influence of electric potential generated, filledfluid, orientation angle of DWBNNTs, foam-core and a few other parameters on the resonance frequency of SCCS are investigated. Results show that SCCS and consequently the generated Φ improve sensor and actuator applications in several process industries, because it not only increases the vibration frequency, but also extends economic viability of the smart structure

Numerical Investigation of Forced Convection of Nanofluid Flow in Microchannels: Effect of Adding Micromixer

In the present study, forced convection of CuO–water nanofluid in a two dimensional parallel plate microchannel with and without micromixers has been investigated numerically. Two horizontal hot baffles were inserted between the adiabatic plates and three vertical baffles, which were attached on the plates, worked as micromixers in order to improve the cooling process. The effect of Reynolds number, Re = 10, 30, 60, 100, and 150 and nanoparticles volume fraction, from 0 to 4%, were examined on flow field and heat transfer. Different geometrical configurations for the arrangement of the hot baffles were tested. A FORTRAN code based on finite volume method was developed to solve the governing equations and SIMPLER algorithm was used for handling the pressure-velocity coupling. Simulations showed that the presence of micromixers and increasing the Reynolds number as well as nanoparticles volume fraction, increase the average Nusselt number. In order to achieve maximum heat transfer, best arrangements for the baffles were reported. It was also observed that the size of recirculation zones, which are created behind the micromixer baffles, increases with increasing Reynolds number and leads to better cooling