Dyadic Green's Functions and Guided Surface Waves for a Surface Conductivity Model of Graphene

An exact solution is obtained for the electromagnetic field due to an electric current in the presence of a surface conductivity model of graphene. The graphene is represented by an infinitesimally-thin, local and isotropic two-sided conductivity surface. The field is obtained in terms of dyadic Green's functions represented as Sommerfeld integrals. The solution of plane-wave reflection and transmission is presented, and surface wave propagation along graphene is studied via the poles of the Sommerfeld integrals. For isolated graphene characterized by complex surface conductivity, a proper transverse-electric (TE) surface wave exists if and only if the imaginary part of conductivity is positive (associated with interband conductivity), and a proper transverse-magnetic (TM) surface wave exists when the imaginary part of conductivity is negative (associated with intraband conductivity). By tuning the chemical potential at infrared frequencies, the sign of the imaginary part of conductivity can be varied, allowing for some control over surface wave properties.Comment: 9 figure

OMS FDIR: Initial prototyping

The Space Station Freedom Program (SSFP) Operations Management System (OMS) will automate major management functions which coordinate the operations of onboard systems, elements and payloads. The objectives of OMS are to improve safety, reliability and productivity while reducing maintenance and operations cost. This will be accomplished by using advanced automation techniques to automate much of the activity currently performed by the flight crew and ground personnel. OMS requirements have been organized into five task groups: (1) Planning, Execution and Replanning; (2) Data Gathering, Preprocessing and Storage; (3) Testing and Training; (4) Resource Management; and (5) Caution and Warning and Fault Management for onboard subsystems. The scope of this prototyping effort falls within the Fault Management requirements group. The prototyping will be performed in two phases. Phase 1 is the development of an onboard communications network fault detection, isolation, and reconfiguration (FDIR) system. Phase 2 will incorporate global FDIR for onboard systems. Research into the applicability of expert systems, object-oriented programming, fuzzy sets, neural networks and other advanced techniques will be conducted. The goals and technical approach for this new SSFP research project are discussed here

Assessing Consistency and Fairness in Sentencing: A Comparative Study in Three States

Summarizes a study of sentencing guidelines in Michigan, Minnesota, and Virginia comparing levels of predictability and judicial discretion under different guideline systems, effectiveness in limiting discriminatory disparities, and lessons learned

A theoretical investigation of the aerodynamics of slender wing-body combinations exhibiting leading-edge separation

Theoretical investigation of aerodynamics of slender wing-body combinations exhibiting leading edge separatio

Experimental and Analytical Investigation of the Transonic and Supersonic Divergence Characteristics of a Delta-Plan-Form All- Movable Control

The static aeroelastic divergence characteristics of a delta-planform model of the canard control surface of a proposed air-to-ground missile have been studied both analytically and experimentally in the Mach number range from 0.6 to 3.0. The experiments indicated that divergence occurred at a nearly constant value of dynamic pressure at Mach numbers up to 1.2. At higher Mach numbers somewhat higher values of dynamic pressure were required to produce divergence. The analysis and the experiment indicate that the camber stiffness of the control surface and the stiffness of the control actuator are both important in divergence of surfaces of this type

Solar/hydrogen systems assessment. Volume 1: Solar/hydrogen systems for the 1985 - 2000 time frame

Opportunities for commercialization of systems capable of producing hydrogen from solar energy were studied. The hydrogen product costs that might be achieved by the four selected candidate systems was compared with the pricing structure and practices of the commodity gas market. Subsequently, product cost and market price match was noted to exist in the small user sector of the hydrogen marketplace. Barriers to and historical time lags in, commercialization of new technologies are reviewed. Recommendations for development and demonstration programs designed to accelerate the commercialization of the candidate systems are presented

Two-stage Kondo effect in a four-electron artificial atom

An artificial atom with four electrons is driven through a singlet-triplet transition by varying the confining potential. In the triplet, a Kondo peak with a narrow dip at drain-source voltage V_ds=0 is observed. The low energy scale V_ds* characterizing the dip is consistent with predictions for the two-stage Kondo effect. The phenomenon is studied as a function of temperature T and magnetic field B, parallel to the two-dimensional electron gas. The low energy scales T* and B* are extracted from the behavior of the zero-bias conductance and are compared to the low energy scale V_ds* obtained from the differential conductance. Good agreement is found between kT* and |g|muB*, but eV_ds* is larger, perhaps because of nonequilibrium effects.Comment: 7 pages, 7 figures. Added labels on Fig. 3f and one referenc

On the design and development of a miniature ceramic gimbal bearing

A review is made of a program to develop ceramic gimbal bearings for a miniaturized missile guidance system requiring nonmagnetic properties and higher load capacity than possible with conventional AISI 440C stainless steel bearings. A new gimbal design concept is described which utilizes the compressive strength and nonmagnetic properties of silicon nitride (Si3N4) ceramics for the gimbal bearing. Considerable manufacturing development has occurred in the last 5 years making ceramic bearings a viable option in the gimbal design phase. A preliminary study into the feasibility of the proposed design is summarized. Finite element analysis of the brittle ceramic bearing components under thermal stress and high acceleration loading were conducted to ensure the components will not fail catastrophically in service. Finite element analysis was also used to optimize the adhesive joint design. Bearing torque tests run at various axial loads indicate that the average running torque of ceramic bearings varies with load similarly to that of conventional steel bearings

Yuccas (Agavaceae) of the International Four Corners: Southwestern USA and Northwestern Mexico

Yuccas (Yucca, Agavaceae) are an easily recognizable constituent of the vegetation of the International Four Corners; an area made up of portions of Arizona, New Mexico, Sonora and Chihuahua. We recognize three species as native to the region, Yucca baccata, Y. elata and Y. madrensis, together with interspecific hybrids, and document for the first time naturally occurring intersectional hybridization between baccate-fruited (sect. Yucca) and capsular-fruited (sect. Chaenocarpa) species. We examine the reproductive barriers to hybridization operating within the genus, i.e., spatial, temporal and ethological, and we consider circumstances that may have been responsible for the production and widespread distribution of hybrids in the IFC. These include establishment of sympatry, pollinator biology, founding hybrids and human activities. We also reflect on the present situation regarding sexual reproduction in species of Yucca in the Southwest

Soldered Bundle Background for the De Sitter Top

We prove that the mathematical framework for the de Sitter top system is the de Sitter fiber bundle. In this context, the concept of soldering associated with a fiber bundle plays a central role. We comment on the possibility that our formalism may be of particular interest in different contexts including MacDowell-Mansouri theory, two time physics and oriented matroid theory.Comment: 12 pages, Latex; some improvements introduced, reference added, typos correcte