Structure Formation and Coupling Reactions of Hexaphenylbenzene and Its Brominated Analog

The on-surface coupling of the prototypical precursor molecule for graphene nanoribbon synthesis, 6,11-dibromo-1,2,3,4-tetraphenyltriphenylene (C42Br2H26, TPTP), and its non-brominated analog hexaphenylbenzene (C42H30, HPB), was investigated on coinage metal substrates as a function of thermal treatment. For HPB, which forms non-covalent 2D monolayers at room temperature, a thermally induced transition of the monolayer’s structure could be achieved by moderate annealing, which is likely driven by π-bond formation. It is found that the dibrominated carbon positions of TPTP do not guide the coupling if the growth occurs on a substrate at temperatures that are sufficient to initiate C--H bond activation. Instead, similar one-dimensional molecular structures are obtained for both types of precursors, HPB and TPTP

Electrical and Elastic Properties of Individual Single-Layer Nb₄C₃Tₓ MXene Flakes

2D carbides and nitrides (MXenes) are widely recognized for their exceptional promise for numerous applications. However, physical property measurements of their individual monolayers remain very limited despite their importance for revealing the intrinsic physical properties of MXenes. The first mechanical and electrical measurements of individual single‐layer flakes of Nb4C3Tx MXene, which are prepared via an improved synthetic method are reported. Characterization of field‐effect transistor devices based on individual single‐layer Nb4C3Tx flakes shows an electrical conductivity of 1024 ± 165 S cm−1, which is two orders of magnitude higher than the previously reported values for bulk Nb4C3Tx assemblies, and an electron mobility of 0.41 ± 0.27 cm2 V−1 s−1. Atomic force microscopy nanoindentation measurements of monolayer Nb4C3Tx membranes yield an effective Young's modulus of 386 ± 13 GPa, assuming a membrane thickness of 1.26 nm. This is the highest value reported for nanoindentation measurements of solution‐processable 2D materials, revealing the potential of Nb4C3Tx as a primary component for various mechanical applications. Finally, the agreement between the mechanical properties of 2D Nb4C3Tx MXene and cubic NbC suggests that the extensive experimental data on bulk carbides could be useful for identifying new MXenes with improved functional characteristics

Personalized prediction of the results of reconstructive surgery for chronic otitis media

Introduction. The goal of the surgical treatment of patients with chronic otitis media is to eliminate the consequences of the inflammatory and destructive disease while preserving the anatomy of the middle ear and improving auditory function. According to the literature, the outcome of middle ear reconstructive surgery for the surgeon and the patient in most cases remains unpredictable. The development of an integrated approach to predicting the results of reconstructive sanitizing surgery will make it  possible to select the most effective surgical tactics in terms of treatment time and type of surgical intervention.Aim. To develop a methodology for personalized prediction of the result of operations on the temporal bone in patients with chronic otitis media and substantiate the choice of optimal surgical tactics, taking into account clinical and functional parameters.Materials and methods. A retrospective study was carried out to compare the data of patients with the use of the author’s personalized prognosis method: “A method for predicting the result of tympanoplasty” and “A method for predicting the degree of  hearing loss in otosurgery for chronic otitis media” with the results of surgical treatment of 263 patients with chronic otitis media, operated on in hospitals in Moscow. Chelyabinsk in 2018–2020.Results and discussion. In the observation, the patients were divided into two groups according to the sum of points, which determined the volume, type and timing of the operation. The sum of points less than or equal to 20 was assessed as a favorable prognosis for reconstructive debridement surgery. The sum of points in the range from 21–40 was assessed as the possibility of carrying out onestage surgery for the purpose of sanitation and reconstruction, but the patient should be informed about the unfavorable prognosis for the restoration of hearing. A score greater than 40 is assessed as an unfavorable prognosis, with an indication for separate-stage surgery, indicating a socially significant hearing loss in the postoperative period in patients with chronic otitis media.Conclusion. A personalized approach to predicting the results of surgical treatment forms groups of patients with chronic suppurative otitis media and helps in choosing surgical tactics in terms of the type, volume and timing of one-stage or separatestage reconstructive surgery and the need for reoperation for a period of one year

UV-Light-Tunable p-/n-Type Chemiresistive Gas Sensors Based on Quasi-1D TiS\u3csub\u3e3\u3c/sub\u3e Nanoribbons: Detection of Isopropanol at ppm Concentrations

The growing demand of society for gas sensors for energy-efficient environmental sensing stimulates studies of new electronic materials. Here, we investigated quasi-one-dimensional titanium trisulfide (TiS3) crystals for possible applications in chemiresistors and on-chip multisensor arrays. TiS3 nanoribbons were placed as a mat over a multielectrode chip to form an array of chemiresistive gas sensors. These sensors were exposed to isopropanol as a model analyte, which was mixed with air at low concentrations of 1–100 ppm that are below the Occupational Safety and Health Administration (OSHA) permissible exposure limit. The tests were performed at room temperature (RT), as well as with heating up to 110 oC, and under an ultraviolet (UV) radiation at λ = 345 nm. We found that the RT/UV conditions result in a n-type chemiresistive response to isopropanol, which seems to be governed by its redox reactions with chemisorbed oxygen species. In contrast, the RT conditions without a UV exposure produced a p-type response that is possibly caused by the enhancement of the electron transport scattering due to the analyte adsorption. By analyzing the vector signal from the entire on-chip multisensor array, we could distinguish isopropanol from benzene, both of which produced similar responses on individual sensors. We found that the heating up to 110 oC reduces both the sensitivity and selectivity of the sensor array

UV-Light-Tunable p-/n-Type Chemiresistive Gas Sensors Based on Quasi-1D TiS3 Nanoribbons: Detection of Isopropanol at ppm Concentrations

The growing demand of society for gas sensors for energy-efficient environmental sensing stimulates studies of new electronic materials. Here, we investigated quasi-one-dimensional titanium trisulfide (TiS(3)) crystals for possible applications in chemiresistors and on-chip multisensor arrays. TiS(3) nanoribbons were placed as a mat over a multielectrode chip to form an array of chemiresistive gas sensors. These sensors were exposed to isopropanol as a model analyte, which was mixed with air at low concentrations of 1–100 ppm that are below the Occupational Safety and Health Administration (OSHA) permissible exposure limit. The tests were performed at room temperature (RT), as well as with heating up to 110 °C, and under an ultraviolet (UV) radiation at λ = 345 nm. We found that the RT/UV conditions result in a n-type chemiresistive response to isopropanol, which seems to be governed by its redox reactions with chemisorbed oxygen species. In contrast, the RT conditions without a UV exposure produced a p-type response that is possibly caused by the enhancement of the electron transport scattering due to the analyte adsorption. By analyzing the vector signal from the entire on-chip multisensor array, we could distinguish isopropanol from benzene, both of which produced similar responses on individual sensors. We found that the heating up to 110 °C reduces both the sensitivity and selectivity of the sensor array

Chiral photocurrent in a Quasi-1D TiS3 (001) phototransistor

The presence of in-plane chiral effects, hence spin–orbit coupling, is evident in the changes in the photocurrent produced in a TiS3(001) field-effect phototransistor with left versus right circularly polarized light. The direction of the photocurrent is protected by the presence of strong spin–orbit coupling and the anisotropy of the band structure as indicated in NanoARPES measurements. Dark electronic transport measurements indicate that TiS3 is n-type and has an electron mobility in the range of 1–6 cm2V−1s−1. I–V measurements under laser illumination indicate the photocurrent exhibits a bias directionality dependence, reminiscent of bipolar spin diode behavior. Because the TiS3 contains no heavy elements, the presence of spin–orbit coupling must be attributed to the observed loss of inversion symmetry at the TiS3(001) surface