16,219 research outputs found
Testing conformal mapping with kitchen aluminum foil
We report an experimental verification of conformal mapping with kitchen
aluminum foil. This experiment can be reproduced in any laboratory by
undergraduate students and it is therefore an ideal experiment to introduce the
concept of conformal mapping. The original problem was the distribution of the
electric potential in a very long plate. The correct theoretical prediction was
recently derived by A. Czarnecki (Can. J. Phys. 92, 1297 (2014))
Composting paper and grass clippings with anaerobically treated palm oil mill effluent
Purpose The purpose of this study is to investigate the composting performance of anaerobically treated palm oil mill effluent (AnPOME) mixed with paper and grass clippings. Methods Composting was conducted using a laboratory scale system for 40 days. Several parameters were determined: temperature, mass reduction, pH, electrical conductivity, colour, zeta potential, phytotoxicity and final compost nutrients. Results The moisture content and compost mass were reduced by 24 and 18 %, respectively. Both final compost pH value and electrical conductivity were found to increase in value. Colour (measured as PtCo) was not suitable as a maturity indicator. The negative zeta potential values decreased from −12.25 to −21.80 mV. The phytotoxicity of the compost mixture was found to decrease in value during the process and the final nutrient value of the compost indicates its suitability as a soil conditioner. Conclusions From this study, we conclude that the addition of paper and grass clippings can be a potential substrate to be composted with anaerobically treated palm oil mill effluent (AnPOME). The final compost produced is suitable for soil conditioner
Nicotine strongly activates dendritic cell-mediated adaptive immunity - potential role for progression of atherosclerotic lesions
Background - Antigen-presenting cells (APCs) such as monocytes and dendritic cells (DCs) stimulate T-cell proliferation and activation in the course of adaptive immunity. This cellular interaction plays a role in the growth of atherosclerotic plaques. Nicotine has been shown to increase the growth of atherosclerotic lesions. Therefore, we investigated whether nicotine can stimulate APCs and their T cell–stimulatory capacity using human monocyte–derived DCs and murine bone marrow–derived DCs as APCs. Methods and Results - Nicotine dose-dependently (10-8 to 10-4 mol/L) induced DC expression of costimulatory molecules (ie, CD86, CD40), MHC class II, and adhesion molecules (ie, LFA-1, CD54). Moreover, nicotine induced a 7.0-fold increase in secretion of the proinflammatory TH1 cytokine interleukin-12 by human DCs. These effects were abrogated by the nicotinic receptor antagonist -bungarotoxin and mecamylamine, respectively. The effects of nicotine were mediated in part by the phosphorylation of the PI3 kinase downstream target Akt and the mitogen-activated kinases ERK and p38 MAPK. Nicotine-stimulated APCs had a greater capacity to stimulate T-cell proliferation and cytokine secretion, as documented by mixed lymphocyte reactions and ovalbumin-specific assays with ovalbumin-transgenic DO10.11 mice. In a murine model of atherosclerosis, nicotine significantly enhanced the recruitment of DCs to atherosclerotic lesions in vivo. Conclusions - Nicotine activates DCs and augments their capacity to stimulate T-cell proliferation and cytokine secretion. These effects of nicotine may contribute to its influence on the progression of atherosclerotic lesions
Recommended from our members
Balancing ion parameters and fluorocarbon chemical reactants for SiO2 pattern transfer control using fluorocarbon-based atomic layer etching
In manufacturing, etch profiles play a significant role in device patterning. Here, the authors present a study of the evolution of etch profiles of nanopatterned silicon oxide using a chromium hard mask and a CHF3/Ar atomic layer etching in a conventional inductively coupled plasma tool. The authors show the effect of substrate electrode temperature, chamber pressure, and electrode forward power on the etch profile evolution of nanopatterned silicon oxide. Chamber pressure has an especially significant role, with lower pressure leading to lower etch rates and higher pattern fidelity. The authors also find that at higher electrode forward power, the physical component of etching increases and more anisotropic etching is achieved. By carefully tuning the process parameters, the authors are able to find the best conditions to achieve aspect-ratio independent etching and high fidelity patterning, with an average sidewall angle of 87° ± 1.5° and undercut values as low as 3.7 ± 0.5% for five trench sizes ranging from 150 to 30 nm. Furthermore, they provide some guidelines to understand the impact of plasma parameters on plasma ion distribution and thus on the atomic layer etching process
Recommended from our members
Atomic layer etching of SiO2 with Ar and CHF 3 plasmas: A self-limiting process for aspect ratio independent etching
With ever increasing demands on device patterning to achieve smaller critical dimensions, the need for precise, controllable atomic layer etching (ALE) is steadily increasing. In this work, a cyclical fluorocarbon/argon plasma is successfully used for patterning silicon oxide by ALE in a conventional inductively coupled plasma tool. The impact of plasma parameters and substrate electrode temperature on the etch performance is established. We achieve the self-limiting behavior of the etch process by modulating the substrate temperature. We find that at an electrode temperature of −10°C, etching stops after complete removal of the modified surface layer as the residual fluorine from the reactor chamber is minimized. Lastly, we demonstrate the ability to achieve independent etching, which establishes the potential of the developed cyclic ALE process for small scale device patterning
- …