Challenges of measuring residual stresses in large girth welded pipe spools by neutron diffraction

In this paper, welding induced residual stresses in a welded API 5L X65 girth pipe spools are discussed in as-welded and in local post weld heat treated conditions. Stress measurements were carried out non-destructively using the neutron diffraction technique. For such large-scale components residual stress measurements require significant preparation and planning. First of all, a choice of stress free lattice spacing value, discussed extensively, is of great importance for the evaluation of residual strains and stresses correctly. Besides, the use of a virtual instrument (SSCANSS software) can optimize measurements for distorted or undistorted large components with or without complex details. Moreover, the well-planned “window” cut through the thickness greatly reduced measurement time. A number of points were measured across the weld, HAZ and the parent material. Measurement results showed that residual stresses in the as-welded condition was lower than the yield strength of the material, and significant relaxation was also observed in the post weld heat treated samples

Residual Stress State of X65 Pipeline Girth Welds before and after Local and Furnace Post Weld Heat Treatment

This research investigated the effects of global (in other words, furnace-based) and local post weld heat treatment (PWHT) on residual stress (RS) relaxation in API 5L X65 pipe girth welds. All pipe spools were fabricated using identical pipeline production procedures for manufacturing multipass narrow gap welds. Nondestructive neutron diffraction (ND) strain scanning was carried out on girth welded pipe spools and strain-free comb samples for the determination of the lattice spacing. All residual stress measurements were carried out at the KOWARI strain scanning instrument at the Australian Nuclear Science and Technology Organization (ANSTO). Residual stresses were measured on two pipe spools in as-welded condition and two pipe spools after local and furnace PWHT. Measurements were conducted through the thickness in the weld material and adjacent parent metal starting from the weld toes. Besides, three line-scans along pipe length were made 3 mm below outer surface, at pipe wall midthickness, and 3 mm above the inner surface. PWHT was carried out for stress relief; one pipe was conventionally heat treated entirely in an enclosed furnace, and the other was locally heated by a flexible ceramic heating pad. Residual stresses measured after PWHT were at exactly the same locations as those in as-welded condition. Residual stress states of the pipe spools in as-welded condition and after PWHT were compared, and the results were presented in full stress maps. Additionally, through-thickness residual stress profiles and the results of one line scan (3 mm below outer surface) were compared with the respective residual stress profiles advised in British Standard BS 7910 “Guide to methods for assessing the acceptability of flaws in metallic structures” and the UK nuclear industry's R6 procedure. The residual stress profiles in as-welded condition were similar. With the given parameters, local PWHT has effectively reduced residual stresses in the pipe spool to such a level that it prompted the thought that local PWHT can be considered a substitute for global PWHT.</jats:p

Microstructural characterization of two Koto age Japanese swords

Two Japanese long blades of the Ancient Sword (Koto) age have been analysed through time of flight neutrondiffraction. This technique allows the determination of several microstructural properties on different sizegauge volumes. The results of the experiment provided a quantitative multiphase characterization of the steelcomposition of the blades and the determination of peculiar properties of the material, such as the texture,the strain level and the grain size of the crystallites

Low and decreasing vaccine effectiveness against influenza A(H3) in 2011/12 among vaccination target groups in Europe: results from the I-MOVE multicentre case-control study

Within the Influenza Monitoring Vaccine Effectiveness in Europe (I-MOVE) project we conducted a multicentre case–control study in eight European Union (EU) Member States to estimate the 2011/12 influenza vaccine effectiveness against medically attended influenza-like illness (ILI) laboratory-confirmed as influenza A(H3) among the vaccination target groups. Practitioners systematically selected ILI / acute respiratory infection patients to swab within seven days of symptom onset. We restricted the study population to those meeting the EU ILI case definition and compared influenza A(H3) positive to influenza laboratory-negative patients. We used logistic regression with study site as fixed effect and calculated adjusted influenza vaccine effectiveness (IVE), controlling for potential confounders (age group, sex, month of symptom onset, chronic diseases and related hospitalisations, number of practitioner visits in the previous year). Adjusted IVE was 25% (95% confidence intervals (CI): -6 to 47) among all ages (n=1,014), 63% (95% CI: 26 to 82) in adults aged between 15 and 59 years and 15% (95% CI: -33 to 46) among those aged 60 years and above. Adjusted IVE was 38% (95%CI: -8 to 65) in the early influenza season (up to week 6 of 2012) and -1% (95% CI: -60 to 37) in the late phase. The results suggested a low adjusted IVE in 2011/12. The lower IVE in the late season could be due to virus changes through the season or waning immunity. Virological surveillance should be enhanced to quantify change over time and understand its relation with duration of immunological protection. Seasonal influenza vaccines should be improved to achieve acceptable levels of protection.ECD

Influenza vaccine effectiveness estimates in Europe in a season with three influenza type/subtypes circulating: the I-MOVE multicentre case–control study, influenza season 2012/13

In the fifth season of Influenza Monitoring Vaccine Effectiveness in Europe (I-MOVE), we undertook a multicentre case–control study (MCCS) in seven European Union (EU) Member States to measure 2012/13 influenza vaccine effectiveness against medically attended influenza-like illness (ILI) laboratory confirmed as influenza. The season was characterised by substantial co-circulation of influenza B, A(H1N1)pdm09 and A(H3N2) viruses. Practitioners systematically selected ILI patients to swab ≤7 days of symptom onset. We compared influenza-positive by type/subtype to influenza-negative patients among those who met the EU ILI case definition. We conducted a complete case analysis using logistic regression with study as fixed effect and calculated adjusted vaccine effectiveness (AVE), controlling for potential confounders (age, sex, symptom onset week and presence of chronic conditions). We calculated AVE by type/subtype. Study sites sent 7,954 ILI/acute respiratory infection records for analysis. After applying exclusion criteria, we included 4,627 ILI patients in the analysis of VE against influenza B (1,937 cases), 3,516 for A(H1N1)pdm09 (1,068 cases) and 3,340 for influenza A(H3N2) (730 cases). AVE was 49.3% (95% confidence interval (CI): 32.4 to 62.0) against influenza B, 50.4% (95% CI: 28.4 to 65.6) against A(H1N1)pdm09 and 42.2% (95% CI: 14.9 to 60.7) against A(H3N2). Our results suggest an overall low to moderate AVE against influenza B, A(H1N1)pdm09 and A(H3N2), between 42 and 50%. In this season with many co-circulating viruses, the high sample size enabled stratified AVE by type/subtype. The low estimates indicate seasonal influenza vaccines should be improved to achieve acceptable protection levels