267 research outputs found
Gallium and thallium NMR study of phase transitions and incomemensurability in the layered semiconductor TlGaSe2
Journal ArticleWe report on the first NMR study of phase transitions and incommensurability in the layered semiconductor TlGaSe2. 69,71Ga and 205Tl NMR data from a powder sample show phase transitions at 118, 108 and around 69 K. The 69Ga and 71Ga spin-lattice relaxation times T1 are short and nearly temperature independent in the temperature range 118 to 108 K, which is characteristic of an incommensurate state. The nuclear magnetization recovery in this temperature range can be fit by two components having different time constants. The ratio of the amplitudes of the components varies with temperature. Such behavior is consistent with the coexistence in this temperature range of two different macroscopic domains, such that one of the domains becomes energetically favored on cooling. The phase transition into a ferroelectric phase at 108 K appears to be accompanied by a displacement of Tl atoms
Nuclear spin diffusion in the semiconductor TlTaS3
We report on a 203Tl and 205Tl nuclear magnetic resonance study of the chain
ternary semiconductor TlTaS3. We show that spin-lattice relaxation in this
compound is driven by two contributions, namely by interactions of nuclear
spins with thermally activated carriers and with localized electron spins. The
latter mechanism dominates at lower temperature; at that, our measurements
provide striking manifestation of the spin-diffusion-limited relaxation regime.
The experimental data obtained allow us to estimate the spin diffusion
coefficient.Comment: 15 pages, 5 figure
Domain orientations and piezoelectric properties in novel 2–2-type composites with two single-crystal components
The present paper is concerned with the piezoelectric properties and related parameters of the 2–2-type parallel-connected composites wherein rotations of the main crystallographic axes in ferroelectric single crystal components are analyzed. The composite consists of layers of two types that are regularly arranged along the non-polar axis. The Type I layer is a single domain 0.63Pb(Mg1/3Nb2/3)O3–0.37PbTiO3 single crystal (either tetragonal in Composite I or orthorhombic in Composite II). The Type II layer is a Li2B4O7 single crystal/polyethylene medium with 0–3 connectivity. The composite as a whole is characterized by 2–0–2 connectivity. The following parameters of the composite are studied by taking into account the polarization orientation effect in the Type I layer and the microgeometry of the composite in the Type II layer: piezoelectric coefficients (Formula presented.) and (Formula presented.) their hydrostatic analogs (Formula presented.) and (Formula presented.) hydrostatic squared figure of merit (Formula presented.) (Formula presented.) piezoelectric anisotropy factors (Formula presented.) / (Formula presented.) and (Formula presented.) / (Formula presented.) It is shown that large values of the studied piezoelectric coefficients, hydrostatic parameters and anisotropy factors make Composite II more preferable in comparison to Composite I for hydroacoustic, piezoelectric sensor and energy-harvesting applications.</p
Domain orientations and piezoelectric properties in novel 2–2-type composites with two single-crystal components
The present paper is concerned with the piezoelectric properties and related parameters of the 2–2-type parallel-connected composites wherein rotations of the main crystallographic axes in ferroelectric single crystal components are analyzed. The composite consists of layers of two types that are regularly arranged along the non-polar axis. The Type I layer is a single domain 0.63Pb(Mg1/3Nb2/3)O3–0.37PbTiO3 single crystal (either tetragonal in Composite I or orthorhombic in Composite II). The Type II layer is a Li2B4O7 single crystal/polyethylene medium with 0–3 connectivity. The composite as a whole is characterized by 2–0–2 connectivity. The following parameters of the composite are studied by taking into account the polarization orientation effect in the Type I layer and the microgeometry of the composite in the Type II layer: piezoelectric coefficients (Formula presented.) and (Formula presented.) their hydrostatic analogs (Formula presented.) and (Formula presented.) hydrostatic squared figure of merit (Formula presented.) (Formula presented.) piezoelectric anisotropy factors (Formula presented.) / (Formula presented.) and (Formula presented.) / (Formula presented.) It is shown that large values of the studied piezoelectric coefficients, hydrostatic parameters and anisotropy factors make Composite II more preferable in comparison to Composite I for hydroacoustic, piezoelectric sensor and energy-harvesting applications.</p
Piezoelectric sensitivity and hydrostatic response of novel lead-free 2–0–2 composites with two single-crystal components
This paper reports the piezoelectric performance and important related hydrostatic parameters of 2–0–2 composites based on lead-free ferroelectric and piezoelectric single crystals with 4mm symmetry. We demonstrate that ferroelectric domain-engineered alkali niobate-tantalate based single crystals provide large values of the piezoelectric coefficients g3j ∗ and related parameters when used in a 2–0–2 composite system with a relatively wide range of volume fractions of single-crystal components. An ‘aspect-ratio effect’ as a result of the presence of inclusions of a piezoelectric Li2B4O7 single crystal in a polymer medium is studied for the first time for a case where the elastic compliance s12 in the single crystal/polymer layer of the composite passes through zero. It is observed that changes in the aspect ratio and volume fraction of the Li2B4O7 inclusions influence the hydrostatic piezoelectric coefficient gh ∗, squared figure of merit dh ∗gh ∗ and electromechanical coupling factor kh ∗ of the composite, and large values of gh ∗∼102 mV·m/N, dh ∗gh ∗∼ (10−11–10−10) Pa−1 and kh ∗≈ 0.6–0.7 are achieved. A link between max kh ∗ and a change in sgns12 is first described for the 2–2-type composite, and a comparison of the hydrostatic parameters of the novel and related composites is made. The present results show the potential of lead-free 2–0–2 composites that are suitable for piezoelectric sensor, energy-harvesting and hydroacoustic applications.</p
Size-dependent properties of dithallium selenide
We report on size-dependent properties of dithallium selenide, Tl2Se. We have
carried out a comparative nuclear magnetic resonance (NMR) study of Tl2Se
nanorods and bulk samples, measuring NMR spectra and spin-lattice relaxation
rate of 203Tl and 205Tl isotopes. Though bulk Tl2Se was reported to be a metal,
the Korringa-like spin-lattice relaxation behavior is observed only at low
temperatures and is transformed to an activation regime above ~200 K. This
finding is interpreted assuming a two-band model in the semimetallic compound.
Our measurements show significant difference in the Knight shift and indirect
nuclear exchange coupling for the bulk and nanorod Tl2Se samples, reflecting
noticeable distinction in their electronic structure. At that, Tl2Se nanorods
are semiconductors and exhibit a characteristic activation behavior in the
spin-lattice relaxation rate due to the thermal excitation of carriers to the
conduction band. The obtained size dependence of the Tl2Se properties is
interpreted in terms of the semimetal-semiconductor transformation due to the
quantum confinement.Comment: 15 pages, 4 figure
Theoretical Study on the Piezoelectric Performance of Lead-Free 1–3-Type Composites
The paper is devoted to the analysis of high-performance piezo-composites based on lead-free ferroelectric single crystals. The composite consists of parallelepiped-shaped single-crystal rods which are surrounded by a laminar polymer matrix, and the composite as a whole is described by 1–2–2 connectivity. Such a composite structure promotes high piezoelectric sensitivity and hydrostatic response. Of particular interest are piezoelectric coefficients g*33 and h*33, squared figure of merit d*33 g*33, electromechanical coupling factor k*t at the thickness-mode oscillation, and hydrostatic parameters g*h and d*h g*h. The influence of the laminar matrix on the aforementioned parameters is studied in a wide volume-fraction range. Examples of maxima and large anisotropy of some effective parameters are discussed for the 1–2–2 composites based on [Lix(K1−yNay)1−x](Nb1−zTaz)O3:Mn single crystals. The role of elastic properties of the laminar matrix in achieving large hydrostatic parameters and piezoelectric anisotropy of these composites is emphasised. Their effective parameters are compared to those of composites based on the lead-containing relaxor-ferroelectric single crystals and to specific parameters of poled textured ceramics. Advantages of the studied composites over the relaxor-ferroelectric-based composites and textured ceramics open up new possibilities to apply the 1–3-type lead-free composites as active elements of piezoelectric sensors, hydrophones, energy-harvesting, and transducer devices.</p
Effect of thickness on the piezoelectric properties of LiNbO3 films
The results were obtained using the equipment of Research and Education Center and the Center of collective use “Nanotechnology” of Southern Federal University
Piezoelectric sensitivity and hydrostatic response of novel lead-free 2–0–2 composites with two single-crystal components
This paper reports the piezoelectric performance and important related hydrostatic parameters of 2–0–2 composites based on lead-free ferroelectric and piezoelectric single crystals with 4mm symmetry. We demonstrate that ferroelectric domain-engineered alkali niobate-tantalate based single crystals provide large values of the piezoelectric coefficients g3j ∗ and related parameters when used in a 2–0–2 composite system with a relatively wide range of volume fractions of single-crystal components. An ‘aspect-ratio effect’ as a result of the presence of inclusions of a piezoelectric Li2B4O7 single crystal in a polymer medium is studied for the first time for a case where the elastic compliance s12 in the single crystal/polymer layer of the composite passes through zero. It is observed that changes in the aspect ratio and volume fraction of the Li2B4O7 inclusions influence the hydrostatic piezoelectric coefficient gh ∗, squared figure of merit dh ∗gh ∗ and electromechanical coupling factor kh ∗ of the composite, and large values of gh ∗∼102 mV·m/N, dh ∗gh ∗∼ (10−11–10−10) Pa−1 and kh ∗≈ 0.6–0.7 are achieved. A link between max kh ∗ and a change in sgns12 is first described for the 2–2-type composite, and a comparison of the hydrostatic parameters of the novel and related composites is made. The present results show the potential of lead-free 2–0–2 composites that are suitable for piezoelectric sensor, energy-harvesting and hydroacoustic applications.</p
- …