3,986 research outputs found
Montmorilonit – usporedba metoda za njegovo određivanje u ljevaoničkim bentonitima
A comparison and estimation of usefulness of a quantitative analysis of montmorillonite in foundry bentonites, was the aim of this research. The investigations were made by means of three different techniques: methylene blue (MB) adsorption method, Cu(II)-triethylenetetramine complex (Cu(II)-TET) adsorption method, and infrared spectroscopy (FTIR) method. Tests were performed for 9 kinds of bentonites originated from various producers. The achieved results indicated that, the results obtained by the FTIR method were, in general, even 10% lower than the ones obtained by other methods. The best correlation with the data given by the producers were obtained for the Cu(II)-TET method. In addition, this method was characterised by the smallest value of standard deviations. A very essential advantage of the Cu(II)-TET method is a much shorter time needed for the analysis and its easier execution, which is important under production conditions.Cilj ovog istraživanja je bila procjena upotrebljivosti kvantitativne analize montmorilonita u ljevaoničkim bentonitima. Istraživanja su provedena pomoću tri različite tehnike: adsorpcija metilenskog modrila (MB), adsorpcija Cu(II)-trietilentetramin kompleksa (CU(II)-TET), i infracrvena spektroskopija (FTIR). Ispitivanja su provedena na 9 vrsta bentonita koji potječu od različitih proizvođača. Rezultati dobiveni FTIR metodom u prosjeku su za čak 10,0% niži od rezultata dobivenih ostalim metodama. Najbolja korelacija s podatcima od proizvođača dobivena je primjenom Cu(II)-TET metode. Osim toga, kod te metode najmanje su vrijednosti standardnih devijacija. Vrlo važna prednost Cu(II)-TET metode je znatno kraće vrijeme potrebno za anaalizu i lakše provođenje, što je značajno u proizvodnim uvjetima
In vitro tissue microarrays for quick and efficient spheroid characterisation
Three-dimensional in vitro microphysiological cultures, such as spheroids and organoids, promise increased patient relevance and therapeutic predictivity compared to reductionist cell monolayers. However, high-throughput characterisation techniques for 3D models are currently limited to simplistic live/dead assays. By sectioning and staining in vitro microtissues researchers can examine their structure, detect DNA, RNA and protein targets and visualise them at the level of single cells. The morphological examination and immunochemistry staining for in vitro cultures has historically been done in a laborious manner involving testing one set of cultures at a time. We have developed a technology to rapidly screen spheroid phenotype and protein expression by arranging 66 spheroids in a gel array for paraffin-embedding, sectioning and immunohistochemsitry. The process is quick, mostly automatable and uses 11 times less reagents compared to conventional techniques. Here we showcase the capabilities of the technique in an array made up of 11 different cell lines stained in conventional H&E staining, as well as immunohistochemistry staining for estrogen (ER), progesterone (PR) human epidermal growth factor receptors (Her-2) and TP53. This new methodology can be used in optimising stem cell-based models of disease and development, for tissue engineering, safety screening and for efficacy screens in cancer research
Effect of carbon addition on functional and mechnical properties of the Ni3Al phase
Casting technology was applied and research was carried out on two alloys based on the Ni3Al phase with variable carbon content of 0,2 and 1,25 wt. % C, respectively. Resistance to abrasive wear, friction coefficient and Vickers microhardness were determined. Metallographic studies were conducted to examine the macrostructure and microstructure of the investigated alloys. An increase in resistance to abrasive wear and microhardness of alloy containing 1,25 wt. % C was observed. The coefficient of friction was determined, which for the alloy with increased carbon content was much lower than for the alloy containing 0,2 wt. % C. Structural changes were reported to have some effect on functional and mechanical properties of the examined alloys
Effect of carbon addition on functional and mechnical properties of the Ni3Al phase
Casting technology was applied and research was carried out on two alloys based on the Ni3Al phase with variable carbon content of 0,2 and 1,25 wt. % C, respectively. Resistance to abrasive wear, friction coefficient and Vickers microhardness were determined. Metallographic studies were conducted to examine the macrostructure and microstructure of the investigated alloys. An increase in resistance to abrasive wear and microhardness of alloy containing 1,25 wt. % C was observed. The coefficient of friction was determined, which for the alloy with increased carbon content was much lower than for the alloy containing 0,2 wt. % C. Structural changes were reported to have some effect on functional and mechanical properties of the examined alloys
Surface excitonic emission and quenching effects in ZnO nanowire/nanowall systems: limiting effects on device potential.
We report ZnO nanowire/nanowall growth using a two-step vapour phase transport method on a-plane sapphire. X-ray diffraction and scanning electron microscopy data establish that the nanostructures are vertically well-aligned with c-axis normal to the substrate, and have a very low rocking curve width. Photoluminescence data at low temperatures demonstrate the exceptionally high optical quality of these structures, with intense emission and narrow bound exciton linewidths. We observe a high energy excitonic emission at low temperatures close to the band-edge which we assign to the surface exciton in ZnO at ~ 3.366 eV, the first time this feature has been reported in ZnO nanorod systems. This assignment is consistent with the large surface to volume ratio of the nanowire systems and indicates that this large ratio has a significant effect on the luminescence even at low temperatures. The band-edge intensity decays rapidly with increasing temperature compared to bulk single crystal material, indicating a strong temperature-activated non-radiative mechanism peculiar to the nanostructures. No evidence is seen of the free exciton emission due to exciton delocalisation in the nanostructures with increased temperature, unlike the behaviour in bulk material. The use of such nanostructures in room temperature optoelectronic devices appears to be dependent on the control or elimination of such surface effects
Modular classes of skew algebroid relations
Skew algebroid is a natural generalization of the concept of Lie algebroid.
In this paper, for a skew algebroid E, its modular class mod(E) is defined in
the classical as well as in the supergeometric formulation. It is proved that
there is a homogeneous nowhere-vanishing 1-density on E* which is invariant
with respect to all Hamiltonian vector fields if and only if E is modular, i.e.
mod(E)=0. Further, relative modular class of a subalgebroid is introduced and
studied together with its application to holonomy, as well as modular class of
a skew algebroid relation. These notions provide, in particular, a unified
approach to the concepts of a modular class of a Lie algebroid morphism and
that of a Poisson map.Comment: 20 page
Mouse gastrocnemius muscle regeneration after mechanical or cardiotoxin injury
The goal of our study was to compare the skeletal muscle regeneration induced by two types of injury: either crushing, that causes muscle degeneration as a result of mechanical devastation of myofibers, or the injection of a cardiotoxin that is a myotoxic agent causing myolysis of myofibers leading to muscle degeneration. Regenerating muscles were analyzed at selected intervals, until the 14th day following the injury. We analyzed their weight and morphology. We also studied the expression of different myosin heavy chain isoforms as a molecular marker of the regeneration progress. Histological analysis revealed that inflammatory response and myotube formation in crushed muscles was delayed compared to cardiotoxin-injected ones. Moreover, the expression of myosin heavy chain isoforms was observed earlier in cardiotoxin-injured versus crushed muscles. We conclude that the dynamics of skeletal muscle regeneration depends on the method of injury
- …