Numerical Simulations of Instabilities in Single-Hole Office Elements

An orifice element is commonly used in liquid rocket engine test facilities either as a flow metering device, a damper for acoustic resonance or to provide a large reduction in pressure over a very small distance in the piping system. While the orifice as a device is largely effective in stepping down pressure, it is also susceptible to a wake-vortex type instability that generates pressure fluctuations that propagate downstream and interact with other elements of the test facility resulting in structural vibrations. Furthermore in piping systems an unstable feedback loop can exist between the vortex shedding and acoustic perturbations from upstream components resulting in an amplification of the modes convecting downstream. Such was the case in several tests conducted at NASA as well as in the Ariane 5 strap-on P230 engine in a static firing test where pressure oscillations of 0.5% resulted in 5% thrust oscillations. Exacerbating the situation in cryogenic test facilities, is the possibility of the formation of vapor clouds when the pressure in the wake falls below the vapor pressure leading to a cavitation instability that has a lower frequency than the primary wake-vortex instability. The cavitation instability has the potential for high amplitude fluctuations that can cause catastrophic damage in the facility. In this paper high-fidelity multi-phase numerical simulations of an orifice element are used to characterize the different instabilities, understand the dominant instability mechanisms and identify the tonal content of the instabilities

Automated generation of colluding apps for experimental research

Colluding apps bypass the security measures enforced by sandboxed operating systems such as Android. App collusion can be a real threat in cloud environments as well. Research in detecting and protecting against app collusion requires a variety of colluding apps for experimentation. Presently the number of (real or manually crafted) apps available to researchers is very limited. In this paper we propose a system called Application Collusion Engine (ACE) to automatically generate combinations of colluding and non-colluding Android apps to help researchers fairly evaluate different collusion detection and protection methods. Our initial implementation includes a variety of components that enable the system to create more than 5,000 different colluding and non-colluding app sets. ACE can be extended with more functional components to create even more colluding apps. To show the usefulness of our system, we have applied different risk evaluation and collusion detection methods to the created set of colluding apps

Low-Cost Flow Visualization for a Supersonic Ejector

Shadowgraph techniques were applied to the cold flow ejector facility at the Propulsion Research Center at the University of Alabama in Huntsville. The setup for the experiments was relatively simple and was accomplished at very little cost. Series of shadowgraph images were taken of both dual nozzle and single nozzle strut based ejectors operating over a range of chamber pressures. The density gradient patterns in the shadowgraphs were compared to pressure data measured along the top and side walls of the mixing duct. The shadowgraph images showed the presence of barrel shocks emanating from the nozzles which at low pressures terminated in Mach disks and at higher pressures extended beyond the barrel shape and reflected off the walls of the duct. Based on pressure data from previous testing, reflected shocks were expected on the walls of the duct. The shadowgraph images confirmed the locations of these reflected shocks on the top wall of the duct. The shadowgraph images also showed the structure change which correlated to a change in pitch of the ejector noise, and corresponded to a change in trend of the duct wall pressure ratio distributions. The images produced from the setup provided insight into the complex flow behavior inside the ejector duct. In addition, the techniques were a valuable tool as an educational device for students

Uncertainty Analysis of Experimental Discharge Coefficients in Additively Manufactured Liquid Injector Elements

Screening of two additively manufactured liquid injector designs was conducted in the UAH high pressure spray facility. Four variants of each geometry with slightly different dimensions were obtained from eleven separate commercial additive manufacturing services. The devices were manufactured from Inconel 625 using the selective laser melting (SLM) powder bed process. The devices were cold flowed with water over a range of relevant pressure drops (75 psi to 1500 psi) to produce water flow rates from 0.037 to 1.75 lbm/s into ambient back pressure. Discharge coefficients determined from the testing along with the associated uncertainties provide insight into characteristic flow performance variabilities that can be expected from the SLM process for similar geometries

Phenylethynyl Terminated Imide (PETI) Composites Made by High Temperature Vartm

The use of composites as primary structures on aerospace vehicles has increased dramatically over the past decade. As these advanced structures increase in size and complexity, their production costs have grown significantly. A major contributor to these manufacturing costs is the requirement of elevated pressures, during high temperature processing, to create fully consolidated composite parts. Recently, NASA Langley has licensed a series of low viscosity Phenyl Ethynyl Terminated Imide, PETI, oligomers that possess a wide processing window to allow for Resin Transfer Molding, RTM, processing. These resins, PETI-8 and PETI-330, demonstrate void fractions of approx.1% under elevated pressure consolidation. However, when used with a standardized thermal curing cycle in a High Temperature Vacuum Assisted RTM (HT-VARTM) process, they display undesirable void contents in excess of 7%. It was determined previously that under the thermal cycles used for laminate fabrication, the phenylethynyl endcap underwent degradation leading to volatile evolution. Modifications to the processing cycle used in the laminate fabrication have reduced the void content significantly (typically less than 3%) for carbon fiber biaxially woven fabric. For carbon fiber uniaxial fabric, void contents of less than 2% have been obtained using both PETI-8 and PETI-330. The resins were infused into carbon fiber preforms at 260 C and cured between 316 C and 371 C. Photomicrographs of the panels were taken and void contents were determined by acid digestion. Mechanical properties of the panels were determined at both room and elevated temperatures. These include short beam shear and flexure tests. The results of this work are presented herein

Scoring method of a Situational Judgment Test:influence on internal consistency reliability, adverse impact and correlation with personality?

textabstractSituational Judgment Tests (SJTs) are increasingly used for medical school selection. Scoring an SJT is more complicated than scoring a knowledge test, because there are no objectively correct answers. The scoring method of an SJT may influence the construct and concurrent validity and the adverse impact with respect to non-traditional students. Previous research has compared only a small number of scoring methods and has not studied the effect of scoring method on internal consistency reliability. This study compared 28 different scoring methods for a rating SJT on internal consistency reliability, adverse impact and correlation with personality. The scoring methods varied on four aspects: the way of controlling for systematic error, and the type of reference group, distance and central tendency statistic. All scoring methods were applied to a previously validated integrity-based SJT, administered to 931 medical school applicants. Internal consistency reliability varied between .33 and .73, which is likely explained by the dependence of coefficient alpha on the total score variance. All scoring methods led to significantly higher scores for the ethnic majority than for the non-Western minorities, with effect sizes ranging from 0.48 to 0.66. Eighteen scoring methods showed a significant small positive correlation with agreeableness. Four scoring methods showed a significant small positive correlation with conscientiousness. The way of controlling for systematic error was the most influential scoring method aspect. These results suggest that the increased use of SJTs for selection into medical school must be accompanied by a thorough examination of the scoring method to be used

Total smoking bans in psychiatric inpatient services: a survey of perceived benefits, barriers and support among staff

Background: The introduction of total smoking bans represents an important step in addressing the smoking and physical health of people with mental illness. Despite evidence indicating the importance of staff support in the successful implementation of smoking bans, limited research has examined levels of staff support prior to the implementation of a ban in psychiatric settings, or factors that are associated with such support. This study aimed to examine the views of psychiatric inpatient hospital staff regarding the perceived benefits of and barriers to implementation of a successful total smoking ban in mental health services. Secondly, to examine the level of support among clinical and non-clinical staff for a total smoking ban. Thirdly, to examine the association between the benefits and barriers perceived by clinicians and their support for a total smoking ban in their unit. Methods: Cross-sectional survey of both clinical and non-clinical staff in a large inpatient psychiatric hospital immediately prior to the implementation of a total smoking ban. Results: Of the 300 staff, 183 (61%) responded. Seventy-three (41%) of total respondents were clinical staff, and 110 (92%) were non-clinical staff. More than two-thirds of staff agreed that a smoking ban would improve their work environment and conditions, help staff to stop smoking and improve patients' physical health. The most prevalent clinician perceived barriers to a successful total smoking ban related to fear of patient aggression (89%) and patient non-compliance (72%). Two thirds (67%) of all staff indicated support for a total smoking ban in mental health facilities generally, and a majority (54%) of clinical staff expressed support for a ban within their unit. Clinical staff who believed a smoking ban would help patients to stop smoking were more likely to support a smoking ban in their unit. Conclusions: There is a clear need to more effectively communicate to staff the evidence that consistently applied smoking bans do not increase patient aggression. There is also a need to communicate the benefits of smoking bans in aiding the delivery of smoking cessation care, and the benefits of both smoking bans and such care in aiding patients to stop smoking

A randomised controlled trial linking mental health inpatients to community smoking cessation supports: A study protocol

<p>Abstract</p> <p>Background</p> <p>Mental health inpatients smoke at higher rates than the general population and are disproportionately affected by tobacco dependence. Despite the advent of smoke free policies within mental health hospitals, limited systems are in place to support a cessation attempt post hospitalisation, and international evidence suggests that most smokers return to pre-admission smoking levels following discharge. This protocol describes a randomised controlled trial that will test the feasibility, acceptability and efficacy of linking inpatient smoking care with ongoing community cessation support for smokers with a mental illness.</p> <p>Methods/Design</p> <p>This study will be conducted as a randomised controlled trial. 200 smokers with an acute mental illness will be recruited from a large inpatient mental health facility. Participants will complete a baseline survey and will be randomised to either a multimodal smoking cessation intervention or provided with hospital smoking care only. Randomisation will be stratified by diagnosis (psychotic, non-psychotic). Intervention participants will be provided with a brief motivational interview in the inpatient setting and options of ongoing smoking cessation support post discharge: nicotine replacement therapy (NRT); referral to Quitline; smoking cessation groups; and fortnightly telephone support. Outcome data, including cigarettes smoked per day, quit attempts, and self-reported 7-day point prevalence abstinence (validated by exhaled carbon monoxide), will be collected via blind interview at one week, two months, four months and six months post discharge. Process information will also be collected, including the use of cessation supports and cost of the intervention.</p> <p>Discussion</p> <p>This study will provide comprehensive data on the potential of an integrated, multimodal smoking cessation intervention for persons with an acute mental illness, linking inpatient with community cessation support.</p> <p>Trial Registration</p> <p>Australian and New Zealand Clinical Trials Registry ANZTCN: <a href="http://www.anzctr.org.au/ACTRN12609000465257.aspx">ACTRN12609000465257</a></p