Isostructural second-order phase transition of b-Bi2O3 at high pressures: an experimental and theoretical study

This document is the Accepted Manuscript version of a Published Work that appeared in final form in Journal of Physical Chemistry C, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see http://dx.doi.org/10.1021/jp507826jWe report a joint experimental and theoretical study of the structural and vibrational properties of synthetic sphaerobismoite (beta-Bi2O3) at high pressures in which room-temperature angle-dispersive X-ray diffraction (XRD) and Raman scattering measurements have been complemented with ab initio total energy and lattice dynamics calculations. Striking changes in Raman spectra were observed around 2 GPa, whereas X-ray diffraction measurements evidence no change in the tetragonal symmetry of the compound up to 20 GPa; however, a significant change exists in the compressibility when increasing pressure above 2 GPa. These features have been understood by means of theoretical calculations, which show that beta-Bi2O3 undergoes a pressure-induced isostructural phase transition near 2 GPa. In the new isostructural beta' phase, the Bi3+ and O2- environments become more regular than those in the original beta phase because of the strong decrease in the activity of the lone electron pair of Bi above 2 GPa. Raman measurements and theoretical calculations provide evidence of the second-order nature of the pressure-induced isostructural transition. Above 20 GPa, XRD measurements suggest a partial amorphization of the sample despite Raman measurements still show weak peaks, probably related to a new unknown phase which remains up to 27 GPa. On pressure release, XRD patterns and Raman spectra below 2 GPa correspond to elemental Bi-I, thus evidencing a pressure-induced decomposition of the sample during downstroke.Financial support from the Spanish Consolider Ingenio 2010 Program (MALTA Project CSD2007-00045) is acknowledged. This work was also supported by Brazilian Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) under Project 201050/2012-9, Spanish MICINN under Projects MAT2010-21270-004-01/03/04 and MAT2013-46649-C4-2/3/4-P, Spanish MINECO under Project CTQ2012-36253-C03-02, and from Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia under Projects UPV2011-0914 PAID-05-11 and UPV2011-0966 PAID-06-11. Supercomputer time has been provided by the Red Espanola de Supercomputacion (RES) and the MALTA cluster. JAS. acknowledges Juan de la Cierva fellowship program for financial support.Pereira, ALJ.; Sans Tresserras, JÁ.; Vilaplana Cerda, RI.; Gomis, O.; Manjón Herrera, FJ.; Rodriguez-Hernandez, P.; Muñoz, A.... (2014). Isostructural second-order phase transition of b-Bi2O3 at high pressures: an experimental and theoretical study. Journal of Physical Chemistry C. 118(40):23189-23201. https://doi.org/10.1021/jp507826jS23189232011184

Anisotropic encoding of three-dimensional space by place cells and grid cells

The subjective sense of space may result in part from the combined activity of place cells in the hippocampus and grid cells in posterior cortical regions such as the entorhinal cortex and pre- and parasubiculum. In horizontal planar environments, place cells provide focal positional information, whereas grid cells supply odometric (distance measuring) information. How these cells operate in three dimensions is unknown, even though the real world is three-dimensional. We investigated this issue in rats exploring two different kinds of apparatus: a climbing wall (the 'pegboard') and a helix. Place and grid cell firing fields had normal horizontal characteristics but were elongated vertically, with grid fields forming stripes. It seems that grid cell odometry (and by implication path integration) is impaired or absent in the vertical domain, at least when the rat itself remains horizontal. These findings suggest that the mammalian encoding of three-dimensional space is anisotropic

A lightweight feedback-controlled microdrive for chronic neural recordings

Objective. Chronic neural recordings have provided many insights into the relationship between neural activity and behavior. We set out to develop a miniaturized motorized microdrive that allows precise electrode positioning despite possibly unreliable motors. Approach. We designed a feedback-based motor control mechanism. It contains an integrated position readout from an array of magnets and a Hall sensor. Main results. Our extremely lightweight (<1 g) motorized microdrive allows remote positioning of both metal electrodes and glass pipettes along one motorized axis. Target locations can be defined with a range of 6 mm and they can be reached within 1 µm precision. The incorporated headstage electronics are capable of both extracellular and intracellular recordings. We include a simple mechanism for repositioning electrodes in three dimensions and for replacing them during operation. We present neural data from different premotor areas of adult and juvenile zebra finches. Significance. Our findings show that feedback-based microdrive control requires little extra size and weight, suggesting that such control can be incorporated into more complex multi-electrode designs

Ferroelectric properties of mechanically synthesized nanosized barium titanate

Barium titanate ceramics were prepared through mechanochemical synthesis starting from fresh prepared barium oxide and titanium oxide in rutile form. Mixture of oxides was milled in zirconia oxide jar in the planetary ball-mill during 30, 60, 120 and 240 min. Extended time of milling directed to formation of higher amount of barium titanate perovskite phase. Barium titanate with good crystallinity was formed after 240 min. Sintering without pre-calcinations step was performed at 1330 degrees C for 2 hours with heating rate of 10 degrees C/min. The XRD, DSC, IR and TEM analyses were performed. Electric and ferroelectric properties were studied. Very well defined hysteresis loop was obtained

Nanodimensional spinel NiFe2O4 and ZnFe2O4 ferrites prepared by soft mechanochemical synthesis

NiFe2O4 and ZnFe2O4 ferrites have been prepared by soft mechanochemical synthesis. The formation of spinel phase and crystal structure of sintered powders were analyzed by X-ray diffraction, Raman spectroscopy, and transmission microscopy. In order to confirm phase formation and cation arrangement, Mossbauer measurements were done. Investigation of the magnetization as a function of magnetic field confirms an expected change of the degree of inversion in the spinel structure with the sintering. The electrical DC/resistivity/conductivity was measured in the temperature range of 298-423 K. Impedance spectroscopy was performed in the wide frequency range (100 Hz-10 MHz) at different temperatures. (C) 2 013 AIP Publishing LLC21st IEEE International Symposium on Applications of Ferroelectrics held jointly with 11th European Conference on the Applications of Polar Dielectrics and 4th Conference on Piezoresponse Force Microscopy and Nanoscale Phenomena in Polar Materials, Jul 09-13, 2012, Univ Aveiro, Aveiro, Portuga

Preparation and characterization of spinel nickel ferrite obtained by the soft mechanochemically assisted synthesis

Nickel ferrite, NiFe2O4 has been prepared by a soft mechanochemical route from mixture of (1) Ni(OH)(2) and alpha-Fe2O3 and (2) Ni(OH)(2) and Fe(OH)(3) powders in a planetary ball mill for varying duration. Soft mechanochemical reaction leading to formation of the NiFe2O4 spinel phase was followed by X-ray diffraction, Raman and infrared spectroscopy, TGA, scanning and transmission microscopy. The spinel phase formation was first observed after 4 h of milling and its formation was completed after 25 h in the both cases. The synthesized NiFe2O4 ferrite has a nanocrystalline structure with a crystallite size of about 20 and 10 nm respectively for the cases (1) and (2). The final grain size in the system (1) is about twice as large as that in the system (2), what is a consequence of different reaction paths in these two processing routes. There are five Raman and four IR active modes. Mossbauer spectroscopy studies implied on the possible cation distribution between the tetrahedral and octahedral sites in formed NiFe2O4 spinel structure. We were able to estimate the degree of inversion at most 0.82 in the case (1) and 0.66 in the case (2). (c) 2012 Elsevier Ltd. All rights reserved

Mechanically activating formation of layered structured bismuth titanate

Bismuth titanatc-Bi(4)Ti(3)O(12) (BIT) with wide application in the electronic industry as capacitors, memory devices and sensors is the simplest compound in the Aurivillius family, which consists of (Bi(2)O(2))(2+) sheets alternating with (Bi(2)T(i)3O(10))(2-) perovskite-like layers. The synthesis of more resistive BIT ceramics would be preferable advance in obtaining of well-densified ceramic with small grains randomly oriented to limit the conductivity along the (Bi(2)O(2))(2+) layers. Having in mind that the conventional ceramic route for the synthesis can lead to non-stoichiometry in composition, in consequence of the undesirable loss in bismuth content through volatilization of Bi(2)O(3) at elevated temperature, our efforts were addressed to preparation of BIT by mechanical activation the constituent oxides. The nucleation and phase formation of BIT, crystal structure, microstructure, powder particle size and specific surface area were followed by XRD, Rietveld refinement analysis, thermal analysis, scanning electron microscopy (SEM) and the BET specific surface area measurements. (c) 2005 Elsevier B.V. All rights reserved