Enhanced coupling design of a detuned damped structure for clic

The key feature of the improved coupling design in the Damped Detuned Structure (DDS) is focused on the four manifolds. Rectangular geometry slots and rectangular manifolds are used. This results in a significantly stronger coupling to the manifolds compared to the previous design. We describe the new design together with its wakefield damping properties.Comment: 3 pages, 8 figures, submitted to IPAC1

Spin dynamics and spin freezing in the triangular lattice antiferromagnets FeGa2S4 and NiGa2S4

Magnetic susceptibility and muon spin relaxation (muSR) experiments have been carried out on the quasi-2D triangular-lattice spin S = 2 antiferromagnet FeGa2S4. The muSR data indicate a sharp onset of a frozen or nearly-frozen spin state at T* = 31(2) K, twice the spin-glass-like freezing temperature T_f = 16(1) K. The susceptibility becomes field dependent below T*, but no sharp anomaly is observed in any bulk property. A similar transition is observed in muSR data from the spin-1 isomorph NiGa2S4. In both compounds the dynamic muon spin relaxation rate lambda_d(T) above T* agrees well with a calculation of spin-lattice relaxation by Chubukov, Sachdev, and Senthil in the renormalized classical regime of a 2D frustrated quantum antiferromagnet. There is no firm evidence for other mechanisms. At low temperatures lambda_d(T) becomes temperature independent in both compounds, indicating persistence of spin dynamics. Scaling of lambda_d(T) between the two compounds is observed from ~T_f to ~1.5T*. Although the muSR data by themselves cannot exclude a truly static spin component below T*, together with the susceptibility data they are consistent with a slowly-fluctuating "spin gel" regime between T_f and T*. Such a regime and the absence of a divergence in lambda_d(T) at T* are features of two unconventional mechanisms: (1) binding/unbinding of Z_2 vortex excitations, and (2) impurity spins in a nonmagnetic spin-nematic ground state. The absence of a sharp anomaly or history dependence at T* in the susceptibility of FeGa2S4, and the weakness of such phenomena in NiGa2S4, strongly suggest transitions to low-temperature phases with unconventional dynamics.Comment: 13 pages, 6 figures, accepted for publication in Physical Review

Inoculation with Arbuscular Mycorrhizal Fungi or Crop Rotation with Mycorrhizal Plants Improves the Growth of Maize in Limed Acid Sulfate Soil

Arbuscular mycorrhizal fungi (AMF) improve the uptake of immobile mineral nutrients such as phosphate, thereby improving plant growth. In acid sulfate soil (ASS), AMF spore density is generally low which impacts root colonization and phosphate uptake. Thus, inoculation may help increase AMF colonization of crops grown in ASS. AMF spore density decreases after cultivation of a non-host crop or bare fallow. In addition, preceding crops affect the growth and yield of subsequent crops. The production of AMF inocula requires AMF-compatible plants. The objective of the present study is to elucidate the effect of preceding crops on the persistence of inoculated AMF and growth of succeeding maize under an ASS condition with lime application. Spore density of AMF after cultivation of preceding crops (soybean or job’s tears) was maintained in comparison to fallow leading to higher AMF colonization of maize and improved plant growth. Thus, maintenance of AMF spore density, either through selection of preceding crops or application of AMF inoculum, may be a viable strategy to improve maize growth in limed ASS of Thailand

Inoculation with Arbuscular Mycorrhizal Fungi or Crop Rotation with Mycorrhizal Plants Improves the Growth of Maize in Limed Acid Sulfate Soil

Arbuscular mycorrhizal fungi (AMF) improve the uptake of immobile mineral nutrients such as phosphate, thereby improving plant growth. In acid sulfate soil (ASS), AMF spore density is generally low which impacts root colonization and phosphate uptake. Thus, inoculation may help increase AMF colonization of crops grown in ASS. AMF spore density decreases after cultivation of a non-host crop or bare fallow. In addition, preceding crops affect the growth and yield of subsequent crops. The production of AMF inocula requires AMF-compatible plants. The objective of the present study is to elucidate the effect of preceding crops on the persistence of inoculated AMF and growth of succeeding maize under an ASS condition with lime application. Spore density of AMF after cultivation of preceding crops (soybean or job’s tears) was maintained in comparison to fallow leading to higher AMF colonization of maize and improved plant growth. Thus, maintenance of AMF spore density, either through selection of preceding crops or application of AMF inoculum, may be a viable strategy to improve maize growth in limed ASS of Thailand

Hydrostatic Compression Behavior and High-Pressure Stabilized β-Phase in γ-Based Titanium Aluminide Intermetallics

Titanium aluminides find application in modern light-weight, high-temperature turbines, such as aircraft engines, but suffer from poor plasticity during manufacturing and processing. Huge forging presses enable materials processing in the 10-GPa range, and hence, it is necessary to investigate the phase diagrams of candidate materials under these extreme conditions. Here, we report on an in situ synchrotron X-ray diffraction study in a large-volume press of a modern (α2 + γ) two-phase material, Ti-45Al-7.5Nb-0.25C, under pressures up to 9.6 GPa and temperatures up to 1686 K. At room temperature, the volume response to pressure is accommodated by the transformation γ → α2, rather than volumetric strain, expressed by the apparently high bulk moduli of both constituent phases. Crystallographic aspects, specifically lattice strain and atomic order, are discussed in detail. It is interesting to note that this transformation takes place despite an increase in atomic volume, which is due to the high ordering energy of γ. Upon heating under high pressure, both the eutectoid and γ-solvus transition temperatures are elevated, and a third, cubic β-phase is stabilized above 1350 K. Earlier research has shown that this β-phase is very ductile during plastic deformation, essential in near-conventional forging processes. Here, we were able to identify an ideal processing window for near-conventional forging, while the presence of the detrimental β-phase is not present under operating conditions. Novel processing routes can be defined from these findings. © 2016, Creative Commons

Short communication: Length-weight relationship and condition factor of the nine fish species of bycatch from Northeast Brazilian Coast

The length-weight relationship (LWR) and relative condition factor (Kn) are essential biometric tools in fishery studies. They provide information about the fish's growth, condition, and suitability in its habitat. LWR values were estimated for nine fish (Chloroscombrus chrysurus, Larimus breviceps, Nebris microps, Odontognathus mucronatus, Paralonchurus brasiliensis, Pellona harroweri, Ointmentsys corvinaeformis, Selene setapinnis, Stellifer rastrifer) captured as bycatch in shrimp trawling from commercial trawls, were collected monthly, between March and November 2019. The coefficient b ranged from 2.7547 to 3.4100 and the Fulton and relative condition factor ranged from 0.39 to 1.38 and 1.00 to 1.02, respectively. The current study would provide baseline data about LWR and the relative condition factor for these species captured in northeast Brazilian coast. These data are valuable for establishing a monitoring and management system for this fish specie

Status of High Power Tests of Normal Conducting Single-Cell Structures

We report the results of ongoing high power tests of single-cell standing wave structures. These tests are part of an experimental and theoretical study of rf breakdown in normal conducting structures at 11.4 GHz. The goal of this study is to determine the maximum gradient possibilities for normal-conducting rf powered particle beam accelerators. The test setup consists of reusable mode launchers and short test structures powered by SLACs XL-4 klystron. The mode launchers and structures were manufactured at SLAC and KEK and tested at the SLAC klystron test laboratory

Enhanced and effective conformational sampling of protein molecular systems for their free energy landscapes

Protein folding and protein–ligand docking have long persisted as important subjects in biophysics. Using multicanonical molecular dynamics (McMD) simulations with realistic expressions, i.e., all-atom protein models and an explicit solvent, free-energy landscapes have been computed for several systems, such as the folding of peptides/proteins composed of a few amino acids up to nearly 60 amino-acid residues, protein–ligand interactions, and coupled folding and binding of intrinsically disordered proteins. Recent progress in conformational sampling and its applications to biophysical systems are reviewed in this report, including descriptions of several outstanding studies. In addition, an algorithm and detailed procedures used for multicanonical sampling are presented along with the methodology of adaptive umbrella sampling. Both methods control the simulation so that low-probability regions along a reaction coordinate are sampled frequently. The reaction coordinate is the potential energy for multicanonical sampling and is a structural identifier for adaptive umbrella sampling. One might imagine that this probability control invariably enhances conformational transitions among distinct stable states, but this study examines the enhanced conformational sampling of a simple system and shows that reasonably well-controlled sampling slows the transitions. This slowing is induced by a rapid change of entropy along the reaction coordinate. We then provide a recipe to speed up the sampling by loosening the rapid change of entropy. Finally, we report all-atom McMD simulation results of various biophysical systems in an explicit solvent