The Unevolved Main Sequence of Nearby Field Stars and the Open Cluster Distance Scale

The slope and zero-point of the unevolved main sequence as a function of metallicity are investigated using a homogeneous catalog of nearby field stars with absolute magnitudes defined with revised Hipparcos parallaxes, Tycho-2 photometry, and precise metallicities from high-dispersion spectroscopy. (B-V)-temperature relations are derived from 1746 stars between [Fe/H] = -0.5 and +0.6 and 372 stars within 0.05 dex of solar abundance; for T_e = 5770 K, the solar color is B-V= 0.652 +/- 0.002 (s.e.m.). From over 500 cool dwarfs between [Fe/H] = -0.5 and +0.5, Delta(B-V)/Delta[Fe/H] at fixed M_V = 0.213 +/- 0.005, with a very weak dependence upon the adopted main sequence slope with B-V at a given [Fe/H]. At Hyades metallicity this translates into Delta M_V/Delta[Fe/H] at fixed B-V = 0.98 +/- 0.02, midway between the range of values empirically derived from smaller and/or less homogeneous samples and model isochrones. From field stars of similar metallicity, the Hyades ([Fe/H] = +0.13) with no reddening has (m-M)_0 = 3.33 +/- 0.02 and M67, with E(B-V) = 0.041, A_V = 3.1E(B-V), and [Fe/H] = 0.00, has (m-M)_0 = 9.71 +/- 0.02 (s.e.m), where the errors quoted refer to internal errors alone. At the extreme end of the age and metallicity scale, with E(B-V) = 0.125 +/- 0.025 and [Fe/H] = +0.39 +/- 0.06, comparison of the fiducial relation for NGC 6791 to 19 field stars with (B-V) above 0.90 and [Fe/H] = +0.25 or higher, adjusted to the metallicity of NGC 6791, leads to (m-M)_0 = 13.07 +/- 0.09, internal and systematic errors included.Comment: 32 pages, 8 eps figures, latex; accepted for PAS

Investigating the insecticidal potential of Geomyces (Myxotrichaceae: Helotiales) and Mortierella (Mortierellacea: Mortierellales) isolated from Antarctica

Fungi isolated from environmentally challenging habitats can have adaptations of potential value when developed as insect pest-controls. Fungal isolates collected from Antarctica, Geomyces sp. I, Geomyces sp. II, Mortierella signyensis and M. alpina, were investigated for (i) growth characteristics at 0-35[degree sign]C, (ii) spore production at 10 and 20[degree sign]C, (iii) viability following exposure to freezing temperatures, and (iv) insecticidal activity against waxmoths (Galleria mellonella L.), houseflies (Musca domestica L.), mealworms (Tenebrio molitor L.) and black vine weevils (Otiorhynchus sulcatus Fabricius). All isolates showed growth between 5-20[degree sign]C, with some showing growth outside this range. Geomyces isolates sporulated over a wider range of conditions than the Mortierella isolates. Spore germination at 10[degree sign]C was higher for Geomyces sp. II when this isolate was produced at 10 compared to 20[degree sign]C (greatest difference 74.6 vs 32.7%). All isolates grew, with the exception of M. alpina, following exposure to -20[degree sign]C for 4 weeks. Insecticidal investigations showed M. alpina and M. signyensis caused significant mortality of waxmoth and housefly larvae via injection and soil inoculation, and M. alpina caused significant mortality of housefly larvae via baiting; the Geomyces isolates had little lethal effect

A Search for Cosmic Microwave Background Anisotropies on Arcminute Scales with Bolocam

We have surveyed two science fields totaling one square degree with Bolocam at 2.1 mm to search for secondary CMB anisotropies caused by the Sunyaev- Zel'dovich effect (SZE). The fields are in the Lynx and Subaru/XMM SDS1 fields. Our survey is sensitive to angular scales with an effective angular multipole of l_eff = 5700 with FWHM_l = 2800 and has an angular resolution of 60 arcseconds FWHM. Our data provide no evidence for anisotropy. We are able to constrain the level of total astronomical anisotropy, modeled as a flat bandpower in C_l, with frequentist 68%, 90%, and 95% CL upper limits of 590, 760, and 830 uKCMB^2. We statistically subtract the known contribution from primary CMB anisotropy, including cosmic variance, to obtain constraints on the SZE anisotropy contribution. Now including flux calibration uncertainty, our frequentist 68%, 90% and 95% CL upper limits on a flat bandpower in C_l are 690, 960, and 1000 uKCMB^2. When we instead employ the analytic spectrum suggested by Komatsu and Seljak (2002), and account for the non-Gaussianity of the SZE anisotropy signal, we obtain upper limits on the average amplitude of their spectrum weighted by our transfer function of 790, 1060, and 1080 uKCMB^2. We obtain a 90% CL upper limit on sigma8, which normalizes the power spectrum of density fluctuations, of 1.57. These are the first constraints on anisotropy and sigma8 from survey data at these angular scales at frequencies near 150 GHz.Comment: 68 pages, 17 figures, 2 tables, accepted for publication in Ap

Hybrid Group IV Nanophotonic Structures Incorporating Diamond Silicon-Vacancy Color Centers

We demonstrate a new approach for engineering group IV semiconductor-based quantum photonic structures containing negatively charged silicon-vacancy (SiV$^-$) color centers in diamond as quantum emitters. Hybrid SiC/diamond structures are realized by combining the growth of nanoand micro-diamonds on silicon carbide (3C or 4H polytype) substrates, with the subsequent use of these diamond crystals as a hard mask for pattern transfer. SiV$^-$ color centers are incorporated in diamond during its synthesis from molecular diamond seeds (diamondoids), with no need for ionimplantation or annealing. We show that the same growth technique can be used to grow a diamond layer controllably doped with SiV$^-$ on top of a high purity bulk diamond, in which we subsequently fabricate nanopillar arrays containing high quality SiV$^-$ centers. Scanning confocal photoluminescence measurements reveal optically active SiV$^-$ lines both at room temperature and low temperature (5 K) from all fabricated structures, and, in particular, very narrow linewidths and small inhomogeneous broadening of SiV$^-$ lines from all-diamond nano-pillar arrays, which is a critical requirement for quantum computation. At low temperatures (5 K) we observe in these structures the signature typical of SiV$^-$ centers in bulk diamond, consistent with a double lambda. These results indicate that high quality color centers can be incorporated into nanophotonic structures synthetically with properties equivalent to those in bulk diamond, thereby opening opportunities for applications in classical and quantum information processing

Improved limits on nuebar emission from mu+ decay

We investigated mu+ decays at rest produced at the ISIS beam stop target. Lepton flavor (LF) conservation has been tested by searching for \nueb via the detection reaction p(\nueb,e+)n. No \nueb signal from LF violating mu+ decays was identified. We extract upper limits of the branching ratio for the LF violating decay mu+ -> e+ \nueb \nu compared to the Standard Model (SM) mu+ -> e+ nue numub decay: BR < 0.9(1.7)x10^{-3} (90%CL) depending on the spectral distribution of \nueb characterized by the Michel parameter rho=0.75 (0.0). These results improve earlier limits by one order of magnitude and restrict extensions of the SM in which \nueb emission from mu+ decay is allowed with considerable strength. The decay \mupdeb as source for the \nueb signal observed in the LSND experiment can be excluded.Comment: 10 pages, including 1 figure, 1 tabl

Towards automating underwater measurement of fish length: a comparison of semi-automatic and manual stereo–video measurements

Underwater stereo–video systems are widely used for counting and measuring fish in aquaculture, fisheries, and conservation management. Length measurements are generated from stereo–video recordings by a software operator using a mouse to locate the head and tail of a fish in synchronized pairs of images. This data can be used to compare spatial and temporal changes in the mean length and biomass or frequency distributions of populations of fishes. Since the early 1990s stereo–video has also been used for measuring the lengths of fish in aquaculture for quota and farm management. However, the costs of the equipment, software, the time, and salary costs involved in post processing imagery manually and the subsequent delays in the availability of length information inhibit the adoption of this technology. We present a semi-automatic method for capturing stereo–video measurements to estimate the lengths of fish. We compare the time taken to make measurements of the same fish measured manually from stereo–video imagery to that measured semi-automatically. Using imagery recorded during transfers of Southern Bluefin Tuna (SBT) from tow cages to grow out cages, we demonstrate that the semi-automatic algorithm developed can obtain fork length measurements with an error of less than 1% of the true length and with at least a sixfold reduction in operator time in comparison to manual measurements. Of the 22 138 SBT recorded we were able to measure 52.6% (11 647) manually and 11.8% (2614) semi-automatically. For seven of the eight cage transfers recorde,d there were no statistical differences in the mean length, weight, or length frequency between manual and semi-automatic measurements. When the data were pooled across the eight cage transfers, there was no statistical difference in mean length or weight between the stereo–video-based manual and semi-automated measurements. Hence, the presented semi-automatic system can be deployed to significantly reduce the cost involved in adoption of stereo–video technology

A Fluctuation Analysis of the Bolocam 1.1mm Lockman Hole Survey

We perform a fluctuation analysis of the 1.1mm Bolocam Lockman Hole Survey, which covers 324 square arcmin to a very uniform point source-filtered RMS noise level of 1.4 mJy/beam. The fluctuation analysis has the significant advantage of utilizing all of the available data. We constrain the number counts in the 1-10 mJy range, and derive significantly tighter constraints than in previous work: the power-law index is 2.7 (+0.18, -0.15), while the amplitude is equal to 1595 (+85,-238) sources per mJy per square degree, or N(>1 mJy) = 940 (+50,-140) sources/square degree (95% confidence). Our results agree extremely well with those derived from the extracted source number counts by Laurent et al (2005). Our derived normalization is about 2.5 times smaller than determined by MAMBO at 1.2mm by Greve et al (2004). However, the uncertainty in the normalization for both data sets is dominated by the systematic (i.e., absolute flux calibration) rather than statistical errors; within these uncertainties, our results are in agreement. We estimate that about 7% of the 1.1mm background has been resolved at 1 mJy.Comment: To appear in the Astrophysical Journal; 22 pages, 9 figure