16 research outputs found

    Comparison of continuous, stat, and intermittent bolus cardiac output measurements during cardiac surgery

    Get PDF
    Background: Off-pump coronary artery bypass (OPCAB) patients often require fluid, vasopressor, or inotropic support. It is therefore important that vigilant monitoring be undertaken to guide intervention and monitor the effects of therapy. Continuous monitoring of cardiac output (CO) is advisable. The aim of this study was to compare continuous cardiac index (CCI) and stat cardiac index (SCI) with intermittent bolus cardiac index (ICI) in patients undergoing OPCAB surgery. Methods: Matched sets of CI measurements among CCI, SCI, and ICI were collected in 35 patients undergoing elective OPCAB at specific time periods. Bland-Altman analysis was used to compare the agreement among the different methods. Results: Bland-Altman analysis of CI measurements yielded a bias, precision, and percent error of 0.09 ± 0.63 L/min/m2 (46.2%) for CCI and 0.09 ± 0.60 L/min/m2 (44.0%) for SCI, compared with ICI measurements. Conclusions: We found that the agreement of CCI, SCI, and ICI was poor. This disagreement increased during periods of open thorax and open pericardium when compared to the period of closed thorax. Continuous CO measurements through pulmonary artery catheter should be interpreted with caution during OPCABope

    Influence of Characteristic of Consumer, Brand/Goods on Consumer Confusion of the Green Products

    No full text
    Consumer confusion causes the purchase failure and wrong purchase by hindering the consumer’s reasonable purchase decision making process. Since this ultimately exerts a direct impact on the economic lost of companies, this has been hardly debated as an important marketing problem. Although consumer confusion arises about the green products as the severity of the environmental problem is on the rise and consumer’s interest about the green products increases, the problem has not been thoroughly investigated and deal with it. In Particular, most studies on consumer confusion focused on the verification of the relationship among variables of negative results or consumer confusion and overlooked a primary factor to create consumer confusion. The object of this study is to confirm the impact on consumer confusion of the green products by the consumer characteristic and brand/goods characteristic and on brand preference about green products by consumer confusion. In this study, the reliability and validity have been analyzed on 237 experienced consumers who have previously purchased green products along with an exploratory and confirmatory analysis on each variable. In addition, the hypothesis was tested by measuring the relationship among variables through structural equation. The Statistical analysis was done using SPSS 18.0 and AMOS 20.0 The results were summarized as follows: First, in the case of the consumer characteristic, the higher need for cognition(NFC) and consumer involvement exert a positive influence on consumer confusion of the green products, whereas the environmental consciousness exerts a negative influence. In case the consumer full of need for cognition judges that green products bear no personal significance or interest, NFC can be regarded not to exert a direct influence on consumer confusion. Since the information on most green products is society-directional and does not positively reflect the consumer stand point, the consumer participation can be seen not to exert a direct influence on consumer confusion. On the other hand, the consumer with a high environmental consciousness is less susceptible to the likelihood of consumer confusion created by green products. Second, in the case of the brand/goods characteristic, the lower brand typicality exerts a positive influence on consumer confusion of green products, but green innovation exerts a negative influence on consumer confusion of green products. When consumers recognize the green product brand, they prefer the brand with a high typicality, and the possibility of consumer confusion created by green product is high if brand typicality is low. In case of the product innovation, the possibility of consumer confusion created by green product is low as the consumer perceives the innovation to be the competitive advantage. Third, consumer confusion of green products has been shown to exert negative influences on brand preference. This may exert a negative influence on the corresponding product brand preference in case the consumers are confused about green products. The theoretical suggestions of this study are as follows: First, the fact that consumer confusion of green products exerts beneficial influence in purchasing green products was tested in the model. This suggests the need to consider consumer confusion of green products. Second, the influence that the consumer and brand/goods characteristic exert on consumer confusion was tested in the model, following the investigation of the influence of green products on consumer confusion from multi-lateral aspects. Third, the concept of consumer confusion of green products was newly defined on the basis of the concept of consumer confusion handled in the previous study, and the development for the measurement of consumer confusion of green products at each dimension was attempted. The empirical implications of this study are as follows: First, companies should provide the accurate and righteous information which also reflect the consumers’ positions to the maximum. Second, in establishing the direction and policy of the green marketing of company, how the information related to green products is accepted and utilized along with green products policy should be considered. Third, the advertisement and campaign which enhance the effective perception about green products for consumers will exert positive influence on the consumption behavior. In addition, consumers should implement a continuous education program to practice the information which companies provide. Forth, companies should positively utilize the parental brand in exhibiting green products, and should positively practice the green marketing activity for making the consumer familiar with the corresponding brand. The limitations and research directions of this study are as follows: First, the broad and diverse examination of consumer characteristic undergoing consumer confusion about green products and brand/goods characteristic should be needed. Second, the examination of various and direct results in addition to brand preference should be needed. Third, the study using more accurate scales will be needed sine the scales of consumer confusion of green products through the previous study at home and abroad was amended and developed Forth, the study about which factor exerts an important influence on consumer confusion of green products will be needed. Fifth, the study on consumer confusion of green products considering the demographic statistic after the collection of many samples will be needed. Sixth, the study on which difference will show at a lower rank dimension of consumer confusion of green products will be needed.;소비자 혼란은 소비자의 합리적 구매의사결정을 방해하여 구매실패나 잘못된 구매 결과로 이어지게 하고 궁극적으로는 기업의 경제적 손실에 직접적인 영향을 미치기 때문에 중요한 마케팅 문제점으로 거론되어 왔다. 환경문제의 심각성이 갈수록 대두되고 소비자들의 친환경 제품에 대한 관심이 증가하면서 친환경 제품에 대한 소비자 혼란의 문제가 나타나고 있음에도 불구하고 이에 관한 연구는 부족한 실정이다. 특히 소비자 혼란에 관한 대부분의 연구들은 소비자 혼란의 부정적 결과 변수와의 관계를 검증했으며, 소비자 혼란을 야기하는 요인을 간과하고 있다. 따라서 본 연구에서는 소비자 특성과 브랜드/제품 특성이 친환경 제품에 대한 소비자 혼란에 미치는 영향을 확인하고 이러한 친환경 제품에 대한 소비자 혼란이 브랜드 선호도에 미치는 영향에 대해 살펴보았다. 본 연구를 검증하기 위해서 친환경 제품을 구매한 경험이 있는 소비자들 237명을 대상으로 신뢰도 분석과 타당도 분석을 하고 이를 통해 각 변수에 대한 탐색적, 확인적 요인분석을 하였다. 또한 가설을 검증하기 위해 구조방정식을 통해 변수와의 관계를 측정하였다. 통계적 분석은 SPSS 18.0과 AMOS 20.0을 사용하였다. 본 연구의 결과를 요약하면 다음과 같다. 첫째, 소비자 특성의 경우, 높은 인지욕구와 소비자 관여도는 친환경 제품에 대한 소비자 혼란에 긍정적인 영향을 미치는 반면에, 환경의식은 부정적인 영향을 미치는 것으로 나타났다. 인지욕구가 높은 소비자가 친환경 제품이 개인적으로 중요하지 않거나 관련이 없다고 판단한다면, 인지욕구가 소비자 혼란에 직접적인 영향을 미치지 않는 것으로 볼 수 있다. 또한, 대부분의 친환경 제품 정보가 사회지향적이거나 소비자 입장을 적극적으로 반영하지 않기 때문에 소비자 관여도가 소비자 혼란에 직접적인 영향을 미치지 않는 것으로 볼 수 있다. 반면에, 환경의식적 소비자일수록 친환경 제품으로 인해 야기될 소비자 혼란의 가능성이 낮다는 것을 알 수 있다. 둘째, 브랜드/제품 특성의 경우, 낮은 브랜드 전형성은 친환경 제품에 대한 소비자 혼란에 긍정적인 영향을 미치는 것으로 나타났지만 그린 혁신성은 친환경 제품에 대한 소비자 혼란에 부정적인 영향을 미치는 것으로 나타났다. 소비자가 친환경 제품 브랜드를 인식할 때 전형성이 높은 브랜드를 선호하므로, 브랜드 전형성이 낮을수록 친환경 제품으로 인해 야기될 소비자 혼란의 가능성이 높다는 것을 알 수 있다. 제품 혁신성의 경우, 소비자가 친환경 제품의 혁신성을 경쟁우위로 지각하기 때문에 친환경 제품으로 인해 야기될 소비자 혼란의 가능성이 낮다는 것을 알 수 있다. 셋째, 친환경 제품에 대한 소비자 혼란은 브랜드 선호도에 부정적인 영향을 미치는 것으로 나타났다. 이는 소비자가 친환경 제품에 대해 혼란을 느낄 경우, 해당 제품 브랜드의 선호도에 부정적인영향을 끼칠 것을 예측할 수 있다. 본 연구의 이론적 시사점은 다음과 같다. 첫째, 친환경 제품에 대한 소비자 혼란이 친환경 제품 구매 행동에 유의한 영향을 미치고 있음을 모형에서 검증하였다. 이는 친환경 제품에 대한 소비자 혼란에 대한 고려가 필요하다는 것을 시사한다. 둘째, 친환경 제품에 대한 소비자 혼란에 미치는 영향을 다각적인 측면에서 살펴보고, 소비자, 브랜드/제품 특성이 소비자 혼란에 미치는 영향을 모형에서 검증하였다. 친환경 제품에 대한 소비자 혼란에 미치는 요인이 다양하다는 점을 확인하였으며, 친환경제품에 대한 소비자 혼란의 영향 요인에 대한 고려가 다양한 각도에서 이루어져야 한다는 것을 시사한다. 셋째, 선행연구에서 다루어진 소비자 혼란의 개념을 바탕으로 친환경 제품에 대한 소비자 혼란의 개념을 새롭게 정의하고, 친환경 제품에 대한 소비자 혼란의 각 차원을 측정하기 위한 척도의 개발을 시도하였다. 본 연구의 실무적 시사점은 다음과 같다. 첫째, 친환경 제품에 대한 소비자 혼란은 기업들이 제공하는 정보의 신뢰성에 대한 의심과 불신에서부터 시작하기 때문에, 기업들은 소비자들에게 정확하고 올바른 정보를 제공하며 소비자들의 입장을 최대한 반영한 정보가 제공되어야 한다. 둘째, 친환경 제품에 관련된 정보가 소비자들에게 어떻게 수용되고 활용되는지 친환경 제품 정책과 더불어 기업의 그린 마케팅 방향과 정책을 수립하는데 있어 고려되어야 할 것이다. 셋째, 광고나 캠페인에서 소비자들의 친환경 제품에 대한 효과성 지각을 높여주는 내용이 포함되면 소비행동에 긍정적인 영향을 미칠 것이다. 또한, 기업들은 제공하는 정보를 소비자들이 좀 더 정확히 이해하고 받아들여 실천할 수 있도록 지속적인 교육 프로그램을 실시해야 것이다. 넷째, 기업들은 친환경 제품을 출시하는 데 있어 모 브랜드를 적극적으로 활용하며 해당 브랜드가 소비자들에게 친숙하게 느껴질 수 있도록 그린 마케팅 활동을 적극적으로 해야 할 것이다. 본 연구의 한계점 및 향후 연구방향은 다음과 같다. 첫째, 친환경 제품에 대한 소비자 혼란에 영향을 미치는 소비자 특성과 브랜드/제품 특성 요인들을 다양하게 살펴보는 연구가 필요할 것이다. 둘째. 친환경 제품에 대한 소비자 혼란의 결과로 브랜드 선호도에 대한 영향력만을 살펴보았지만, 브랜드 선호도 이외의 다양하고 직접적인 결과를 살펴보는 연구가 필요할 것이다. 셋째, 국내외 선행연구들을 통해 친환경 제품에 대한 소비자 혼란의 척도를 수정 및 개발하여 실증분석에 활용하였기 때문에 좀 더 정밀한 척도를 활용한 연구가 필요할 것이다. 넷째, 친환경 제품에 대한 소비자 혼란에 어떠한 요인이 중요한 영향을 미치는 지 살펴보는 연구가 필요할 것이다. 다섯째, 많은 표본들을 확보하여 인구통계학적 요인을 고려한 친환경 제품에 대한 소비자 혼란에 관한 연구가 필요할 것이다. 여섯째, 친환경 제품에 대한 소비자 혼란의 하위 차원별로 어떠한 차이를 보이는지 살펴보는 연구가 필요할 것이다.Ⅰ. 서론 1 A. 문제제기 및 연구목적 1 B. 연구방법 3 C. 논문의 구성 4 Ⅱ. 이론적 고찰 5 A. 소비자 혼란 5 B. 친환경 제품에 대한 소비자 혼란 13 C. 소비자 혼란에 영향을 미치는 요인 20 III. 연구모형 및 가설 30 A. 연구모형 30 B. 가설 설정 31 IV. 연구조사방법 36 A. 변수의 조작적 정의 및 측정도구 36 B. 측정방법 38 C. 표본선정 및 자료수집 39 D. 분석방법 39 Ⅴ. 연구결과 및 해석 40 A. 연구대상 및 특성 40 B. 신뢰도와 타당도 검증 42 C. 연구가설의 검증 47 VI. 논의 및 결론 55 A. 연구의 요약 및 시사점 55 B. 연구의 한계점 및 향후 연구방향 57 참고문헌 59 A. 국내 참고 문헌 59 B. 국외 참고 문헌 65 부록. 설문지 79 Abstract 8

    두경부 편평상피세포 암세포주의 항암제 감수성에 관한 연구

    No full text
    학위논문(석사)--서울대학교 대학원 :의학과 이비인후과학전공,1995.Maste

    Evaluation of gentamicin-induced vestibulotoxicity in rabbits using off-vertical axis rotation test

    No full text
    학위논문(박사)--서울대학교 대학원 :의학과 이비인후과학전공,2003.Docto

    성상신경절 차단 후 뇌산소포화도 변화

    No full text
    Dept. of Medicine/석사[한글] [영문]Background: Stellate ganglion block (SGB) is known to increase blood flow to the innervations area of the stellate ganglion. Near infrared spectroscopy reflects an increased blood volume and allows continuous, non-invasive, and bedside monitoring of regional cerebral oxygen saturation (rSO2). The influence of SGB on bilateral cerebral oxygen saturation was investigated using a near infrared spectroscopy.Methods: SGB was performed on 30 patients with 1% lidocaine 10 ml using a paratracheal technique at the C6 level and confirmed by the presence of Horner's syndrome. The blood pressure (BP), heart rate (HR) and rSO2 were measured before, 5, 10, 15 and 20 minutes after SGB. Tympanic temperature of each ear was measured prior to SGB and 20 minutes after SGB.Results: The increments of the rSO2 on the block side from the baseline were statistically significant at 5, 10, 15 and 20 minutes. The rSO2 on the non-block side compared with the baseline, however, decreased at 15 and 20 minutes. The difference between the block and the non-block sides was significant at 15 and 20 minutes. The BP at 10, 15 and 20 minutes increased and the HR increased at 10 and 15 minutes. There were no significant changes in tympanic temperatures on both block and non-block side.Conclusions: The rSO2 increased on the block side from the baseline but decreased on the non-block side.prohibitio

    朝鮮時代 白瓷墓誌 硏究

    No full text
    墓誌는 죽은 사람의 姓名·出身地·先代系譜·家族關係·官歷·行蹟·德望·生沒年月日과 墓의 位置·坐向 등을 적어 무덤에 묻는 기록물의 총칭이자, 이를 기록한 돌이나 도판에 새긴 글을 말한다. 이중 白瓷를 이용하여 만들어진 것을 白瓷墓誌라 지칭하는 데 특히 朝鮮時代 들어서 활발하게 제작되었다. 백자묘지는 '朝鮮의 墓誌樣式'으로 일컬을 만큼 다종다양한 형태로 만들어졌고, 조선의 전시기에 걸쳐 고루 분포하고 있다. 또한, 많은 양이 남아 있어 조선시대 도자의 흐름을 파악할 수 유물이다. 그럼에도 불구하고 지금까지 백자묘지에 대한 인식이 절대편년자료를 벗어나지 못하고 있어 도자의 독자적인 양식으로 조명된 바가 없으며, 그 연구 성과도 단편적인 설명과 간략한 소개에 그치고 있다. 본 연구는 백자묘지가 儀禮器로서 갖는 특수한 제작배경과 조선백자의 독자적인 양식구축이라는 점에 주목하여 접근한 것이다. 또한, 한국의 묘지가 어떠한 과정을 거쳐 전개되었으며, 어떠한 배경에서 백자로 제작이 가능 하게 되었는지, 그리고 백자묘지 제작이 실제 조선백자의 변천에 부합하는 맥을 형성한다고 할 수 있는지와 같은 문제제기를 통해 논고를 전개 한 것이다. 본문을 통해 먼저, 墓誌淵源의 정리와 당대의 사상적·기술적 배경의 검토를 통해 우리나라에서 묘지가 백자로 제작 될 수 있었던 정황을 추적해 볼 수 있었다. 문헌의 검토결과에 따르면 묘지는 이미 春秋戰國時代부터 그 개념이 발생되어 南北朝時代에 이르면 蓋石·底石의 전형적인 형태를 갖췄음을 알 수 있었다. 우리나라는 中國의 영향을 받아 三國時代부터 묘지가 나타났으며, 특히 高麗時代에 들어와서는 점판암이나 오석을 이용하여 제작되었으며 이는 중국의 것과 동일한 형태를 한 것이었다. 瓷質墓誌의 경우 중국은 明·靑시대에 주로 제작되었으나 그 예가 적고 그 형태가 각각이어서 그 전모를 짐작하기 힘들었다. 日本은 우리나라의 영향을 받아 만들어졌으며 특히 6세기∼8세기경에 남아 있는 묘지를 비교·분석해 볼 수 있었다. 그러나 이 역시 現傳量이 적고 靑銅製의 墓誌만 전하고 있어 韓·中·日의 묘지를 비교분석하는 것은 무리가 있었다. 다만 喪葬禮 文化라는 큰 범주 안에 삼국이 묘지라는 공통분모를 가지고 있었다는 데 그 의의를 찾을 수 있었다. 백자묘지의 제작배경에는 조선의 開國과 함께 확산된 성리학과 유교적 질서로의 포섭노력 그리고 『朱子家禮』의 역할이 컸음을 알 수 있었다. 또한 고려시대까지 애용된 石材가 연마하기 힘든 재료였기 때문에 결과적으로 그 수요를 제한하고, 일부 기득권층에 전유물화 되었던 것을 추정할 수 있었다. 그리고 고려시대에 전용자기였던 청자가 글을 쓰거나 음각하는데 있어 그 전달력이 떨어져 묘지의 재료로 적합하지 않았음을 유추할 수 있었다. 조선시대 백자묘지의 구체적인 고찰은 발생기, 발전기, 전성기, 전환기로 나누어 각 시대별 양식과 형태의 변천을 통해 살펴보았다. 발생기(15세기)는 자기묘지의 시작점으로 많은 수량이 전하고 있지는 않지만 대체로 粉靑沙器가 주종을 이루고, 陰刻白瓷, 靑畵白瓷, 鐵畵白瓷로의 제작이 고루 나타나고 있었다. 형태도 장방형, 위패형의 평면형과 지통형과 같은 입체형도 남아 있었다. 발전기(16세기) 묘지는 대체로 음각기법이 주종을 이루고 청화, 철화기법이 그 뒤를 이었다. 묘지가 이처럼 음각으로 제작되는 것은 그때까지 청화나 철화 안료를 구하기가 용이하지 않았기 때문으로 보인다. 誌文의 구성은 대부분 도판에 정간을 치고 정성스럽게 쓴 경우가 많았다. 정간을 친 경우 좌우에 여백을 두고, 비교적 글자수가 적다. 또한 묘지의 글자체와 구성에는 묘주의 신분이 한 요인으로 작용하고 있음을 알 수 있었다. 전성기(17세기- 19세기)는 수요에 따른 형태변화를 기준으로 ① 제1기(17세기-18세기 중엽)와 ② 제 2기(18세기-19세기후반)로 나누어 살필 수 있었다. 이시기는 질적인 면과 수요측면에서 황금기였다. 즉 전형적인 직사각판형의 청화백자묘지가 확실히 구축되었고 수요는 일부 폭넓게 조선 전역의 관료와 일반인에게로 확대되었다. 이는 비로소 성리학에 입각한 유교적 질서가 사회전반에 뿌리내리게 되고 조상에 대한 제례가 家族宗敎化되는 것을 의미하였다. 전환기(19세기-20세기)로 접어들면 청화기법만 남게 된다. 형태 면에서는 수요층이 지속적으로 일반 서민층에게까지 확산되는 것도 알 수 있다. 특징적으로 18세기부터 서서히 보이기 시작하던 盒과 誌石이 결합된 복합형이 이시기에 성행했다는 점이다. 대부분 묘지의 주인이 매우 높은 신분이었던 것도 알 수 있었다. 그리고 20세기에 들어서면 주로 2편의 묘지가 제작되는데 한쪽 면에는 간략한 表題文을 다른 한편에는 묘지의 位置圖를 남기기도 했다. 조선시대 백자묘지는 크게 평면형, 입체형, 복합형으로 만들어졌는데, 평면형이 주종을 이루었고 특히 직사각 판형이 압도적으로 많았다. 입체형은 원통형, 대접형, 접시형, 항아리형 등으로 다양하게 나타났다. 특히 18세기 이후의 활발해진 각양의 입체형 묘지제작은 지석 수요층의 확대와 연관이 있었다. 그리고 복합형의 경우 18세기 이후 상류층 수요에 맞춰 제작되었던 것을 알 수 있었다. 시기별로는 15세기 상감 분청지석과 청화, 철화가 공존하다가, 16세기에는 음각이 주류를 형성하였고, 청화와 철화도 꾸준히 제작되었다. 특히 청화백자 지석은 15세기부터 시작되어 점차 많아져 19세기에 이르면 전체 지석의 반수 이상으로 확산되며, 20세기까지도 그 명맥은 유지되었던 것을 알 수 있었다. 이어서 백자묘지의 특성과 성격을 규명하는데 내용구성, 성별, 가문의 요인으로 나누어 분류해 보았다. 묘지의 기록내용은 蓋石文, 表題文, 誌文, 銘文으로 나누어졌지만, 이런 부분이 모두 갖추어진 묘지는 발견되지 않았으며, 개석문과 표제문은 상호경계가 모호한 편이었다. 또한 지문구성에 성별과 가문이 영향을 미치는 것을 밝혔으며 이는 해주오씨, 안동김씨, 파평윤씨 가문의 지석을 통해 증명할 수 있었다. 그리고 墓誌體가 조선시대에 유행했던 書體와 관련 있을 것으로 가정하여 그 상관성을 밝혀보고자 하였으나 墓誌體는 줄 곳 楷書로 쓰여져 큰 변화를 파악하기 힘들었다. 그러나 같은 해서라도 분명 시기별로 유행했던 풍이 있었을 것이다. 그러나 유물을 실견하지 않고 도판을 통해 자세한 부분을 파악하기에는 무리가 있었다. 다만, 묘지의 성격상 감정이나 예술적인 감흥을 매개로 소통하고자 함이 배제되었기 때문에 당대의 서풍유행과 크게 연관성이 있지는 않았을 것으로 추측할 수 있었다. 본 논문은 編年資料로 인식 되 온 백자묘지를 독자적인 도자영역으로 제시하고, 현전유물의 도자사적 의의를 규명하고자 종합적으로 분석한 첫 시도라는 점에서 그 의의를 찾을 수 있다. 그러나 실물을 접하기 힘들어 圖版에 의지할 수밖에 없었던 점과 窯址에 대한 고찰이 전혀 이루어지지 않은 한계점도 가지고 있다. 앞으로 가마와의 연계한 면밀한 조사와 유형화된 형태, 기법의 연구가 진척되길 바라며, 특히 중국을 비롯한 주변국의 백자묘지와의 비교분석을 통한 심도 깊은 연구가 진행되기를 기대한다.;Epitaph tablets are general term of records about the deceased's name, place of birth, his/her predecessor pedigree(family tree), family relationships, achievements of both lifetime and work, virtue, date of birth and death, location of the epitaph tablets and finally its exposure which were inscribed on stones or plates and buried in or near the dead's grave. Some of them were made of white porcelain and we call it 'white porcelain epitaph tablets'. These epitaph tablets were, especially, made in Joseon Dynasty. There were various kinds and shapes of white porcelain epitaph tablets during Joseon period and called it『a mode of epitaph tablets in Joseon』. Moreover, there are many epitaph tablets left or found these days and these artifacts help us to understand the porcelain of Joseon period. Nevertheless, until these days, the recognition of white porcelain epitaph tablets were still fixed on an absolute chronological recording studies, so that there were no studies carried out to find out its unique styles and modes of porcelains. The purpose of this study is to observe a special manufacturing background of white porcelain epitaph tablets as a ceremonial implement as well as to construct a unique style/mode of Joseon's white porcelain. There are also other questions raised as follows : a process of Korean epitaph tablets development, the background which made the possibility of white porcelain epitaph tablets production, and then research of the coincidence and relationship between white porcelain epitaph tablet production and the changing process of Joseon's white porcelain. To solve these questions, firstly, look for the origin of white porcelain epitaph tablets, and then, search for the background ideology and its technical backgrounds of the specific period of the time through analogical inference, and finally, understand and arrange the data in its chronological tendancy of white porcelain epitaph tablets in periodic order. According to a number of documents, the origin of epitaph tablets started from the Spring & AutumnㆍWarring State Period, and when it comes to the Period of North and South Dynasties, the tablets formed a typical shape of cover and floor stones. In the case of Korea, the country was influenced by China, and the first epitaph tablets found were from the Three Kingdom period. In Goryeo Dynasty, slate and obsidian were used to make epitaph tablets, which have similar shape to that of China. In China, porcelain epitaph tablets were usually produced during Ming and Ching Dynasty, however, there are only few left and each of them are in different shapes, therefore, it is hard to build an idea of the whole aspect. Japanes epitaph tablets were influenced by us(Korea), especially, epitaph tablets from 6th century to 8th century are those, but there are only few left and those were made of bronze, so it is hard to compare tablets from the Three Kingdom Period to that of Japan. But the significance is that all three countries(China, Japan and Korea) have similar cultural category of funeral and burial ceremony, and inside this barrier, epitaph tablets might have performed a resemblant role in common. There are three main reasons for the background of the white porcelain epitaph tablets production. Firstly, the efforts to imply social ideologies and orders into the Confucian order and the Neo-Confucianism spreading out from the beginning of the Joseon Dynasty as well as the role of 『Chu Hsi's Family Rituals : A Twelfth Century Chinese Manual for the Performance of Cappings, Weddings, Funerals and Ancestral Rites』 took a major part. Secondly, stones, which were popular material used in Goryeo Dynasty, were difficult to handle, so the material was limited and reduced in its use and were allowed only to the vested classes. Finally, celadonwares were not suitable for inscription, therefore it was difficult to produce the epitaph tablets in celadonware. White porcelain epitaph tablets of the Joseon Dynasty can be divided into four periods as follows; beginning era, development era, period of golden age and a transitional period. Each period has got its unique mode, style and shape of white porcelain epitaph tablets. The beginning of the white porcelain epitaph tablets were in 15th century. This is the starting point of the white porcelain epitaph tablets, however, there are not many white porcelain epitaph tablets left and most of them are Buncheong wares(the use of white slip to cover the fairly coarse grey stoneware body) and others are manufactured using various techniques such as intaglio white porcelain, blue and white porcelain, and white porcelain with underglaze iron-paintings as well as varies in shapes. Rectangular form and mortuary tablet shape represents the plane shapes and paper box shape stands for three-dimentional shape. Most of the white porcelain epitaph tablets in the development era (16th century), used the technique of intaglio and followed by the blue and white porcelain and underglaze iron-painting. The reason why epitaph tablets were manufactured by intaglio technique was that underglaze blue or iron painting pigments were difficult to possess. The composition of the tablet sentence were mostly written by making squares for each blank spaces in both sides, therefore, only few letters can be written on the tablet. In addition, the composition and a style of letters on epitaph tablets can be differ from the social class of the dead. Golden age period is from 17th century to 19th century. This period can be divided into two categories as follows : ① First era (17th century to mid-18th century) and ② Second era (mid-18th century to late 19th century). The standard of this division is a transformation of shapes according to its demand. This period was a golden age in both quality and demand i.e. a typical rectagular shape of blue and white porcelain epitaph tablets were made and its demands were expanded to government officials as well as ordinary people all over Joseon Dynasty. This means that Confucian orders were settled on the base of Neo-confucianism in Joseon society and family ancestors became deified. When it moves to the transition period (19th century - 20th century), only blue and white porcelain epitaph tablets were left. In the aspect of shapes, the demands are expanding to the common people continuously were recognizable. Especially, shapes of combined bowl with lid and epitaph tablet, which started from the 18th century became prevalented these days and we can also recognize that the dead of the epitaph tablets were in very high class. In addtion, entering into the 20th century, two epitaph tablets were made in general. One side there were brief title and the other side has the location of the epitaph tablets. To find out the characteristic and special properties of white porcelain epitaph tablets, it was divided into three factors such as contents composition, sex, and family pedigree. The contents of the epitaph tablet are divided in four parts like, short sentence on the cover, title, epitaph, and inscriptions(especially epics), however, there were no epitaph tablets found which has all these four parts contained, and moreover, it is hard to define the difference between short sentence on the cover and the title. Furthermore, composing the epitaph, sex and the family pedigree can influence in the sentences. This was proved through epitaph tablets from Haejo Oh family, Ahndong Kim family and Papyeong Yoon family. In addition, also tried to solve out the letter styles from that of epitaph tablets with character styles generally used in that period, however, most of the letters were written in Haeseo(a name of a style in writing, esp. in calligraphy), therefore, hard to find a difference or change. Of course, there can be differences between same character style in different era, but without looking carefully into real objects, it is hard to find out differences through illustrations. Because it is not for artitistic or emotional expression according to the properties of epitaph tablets, it might not have influenced by the trend nor tendency of a specific era. This study suggested white porcelain epitaph tablets are not only a chronological materials but also a unique field of ceramics and also tried a general analysis to find out the meaning of history of ceramics among the objects handed down to the present for the first time, therefore, we have the significance of its first trial. But there are limitations, for instance, difficulties to look and handle real objects, so the research was only depended on illustrations in catalogues and insufficient examination of major points can be another. In addition, also feel lack of the relationship between kiln and the epitaph tablets, its type pattern and techniques, and moreover, comparison and analysis with that of Chinese white porcelain epitaph tablets should be studied in the future.Ⅰ. 머리말 = 1 Ⅱ. 墓誌의 起源과 展開過程 = 5 1. 墓誌의 起源 = 5 2. 中國과 日本의 墓誌樣相 = 17 3. 朝鮮時代 以前의 墓誌 展開過程 = 21 Ⅲ. 朝鮮時代 白瓷 墓誌의 制作背景 = 25 1. 朝鮮時代 喪葬禮 制度와 墓誌의 需要 = 25 2. 陶瓷 制作技術의 變化 = 29 Ⅳ. 朝鮮時代 白瓷墓誌의 變遷 = 34 1. 시기별 변천양상 = 36 1) 발생기 (15세기) = 36 2) 발전기(16세기) = 42 3) 전성기(17세기-19세기 후반) = 50 4) 전환기(19세기후반-20세기 초반) = 72 2. 墓誌構成의 諸要因 = 77 1) 誌文記錄 方式 = 78 2) 性別 = 79 3) 家門 = 80 4) 朝鮮時代 白瓷墓誌의 書體 = 83 Ⅴ.맺음말 = 89 【參考文獻】 = 93 【圖版目錄】 = 101 圖版 = 107 附錄1. 朝鮮白瓷墓誌의 展開 附錄2. 朝鮮時代 瓷質墓誌 一覽表 ABSTRACT = 12

    The Efficient photoionization of Yb atom by coherent two-photon excitation and the characteristics of laser pulse propagation in atomic media

    No full text
    학위논문(박사)--서울대학교 대학원 :물리학과,1996.Docto

    작업 기억과 주제 친숙도가 고등학생의 영어 읽기 이해에 미치는 영향

    No full text
    본 연구는 경기도 소재 고등학교의 73명 학생들을 대상으로 작업 기억과 주제 친숙도가 명시적 및 추론적 영어 읽기 이해 에 미치는 영향이 어떠한지를 살펴보았다. 수집한 자료에 대해 반복측정 다변량 분산분석을 적용한 결과, 작업 기억이 명시적 이해와 추론적 이해의 양 측면에 미치는 영향이 모두 통계적 으로 유의미하게 나타났다. 그에 비해 주제 친숙도는 명시적 읽기 이해 측면에서만 유의미한 영향을 미치고 있었으며, 작업 기억과 주제 친숙도 간의 상호작용 효과도 나타나지 않았다

    Optimal design of a load balancing process using a discrete-time two-phase queueing model

    No full text

    서버 고장과 작업 취소가 있는 이산시간 대기행렬 시스템의 분석

    No full text
    학위논문(박사) - 한국과학기술원 : 산업및시스템공학과, 2009. 8., [ vi, 69 p. ]In this dissertation, discrete-time queues with negative customers or disasters are addressed. The arrival of a negative customer to a queueing system causes one positive customer to be removed if any customer is present. On the other hand, the arrival of a disaster removes all customers in the system. The discrete-time Geo/Geo/1 queue, which has either negative customers or disasters, has recently appeared in the literature. This Geo/Geo/1 queue with this notion is extended into the Geo/G/1 queue and the GI/Geo/1 queue, respectively, in this research. Using the supplementary variable technique, the stationary queue length distribution of the Geo/G/1 queue with negative customers or disasters is obtained. In addition, for the GI/Geo/1 case, the queue length distribution at an arrival epoch is derived via the embedded Markov chain and the time-average queue length distribution is obtained by level-crossing technique and Semi-Markov process. The stationary sojourn time distributions of both the Geo/G/1 queue and the GI/Geo/1 queue are also presented. Furthermore, it is illustrated how the results of the discrete-time queue with negative arrivals are converted into those of the continuous-time queue. Numerical examples also show the effect of the parameter, which is the arrival rate of either negative customers or disasters, on these queueing models.한국과학기술원 : 산업및시스템공학과
    corecore