Analysis of Epistatic and QE Interaction Effects of QTLs for Grain Shape in Rice

本研究利用基于明恢86x佳辐占水稻重组自交系(rECOMbInAnT InbrEd lInE,rIl)构建的SSr遗传图谱,总标记数为131。联合两季的稻米粒长(gl)、粒宽(gW)、长宽比(l/W)表型数据,应用混合线性模型方法进行QTl定位,并作加性效应、上位效应以及加性QTl、上位性QTl与环境(QTl-by-EnVIrOnMEnT,QE)的互作效应分析。检测到粒长、粒宽和长宽比的加性效应QTlS分别为6个、4个和4个,贡献率分别为23.67%、21.41%和25.78%;检测到8对粒长的上位性QTlS,5对粒宽的上位性QTlS,2对长宽比的上位性QTlS,贡献率分别为16.75%、22.36%和7.55%;环境互作检测中,发现共有9个加性QTlS和7对上位性QTlS与环境发生了互作。结果表明,上位效应在粒形性状的遗传与加性效应一样起了重要作用,环境互作效应对粒形性状有一定的影响。A linkage map consisting of 131 markers was constructed by using a recombinant inbred line (RIL) population derived from the indica-indica rice cross Minghui86×Jiafuzhan.Quantitative trait loci (QTLs) was located with a mixed linear model (QTLmapper1.6) based on the grain shape parameters such as grain length (GL), grain width (GW) and length-width ratio (L/W), and made analysis of additive effects, epistatic, and the interaction effects of QTL-by-environment (QE).Six, four and four QTLs were detected to have significant additive effects for GL, GW and L/W, and the contribution rate were 23.67%、21.41% and 25.78%, respectively.Eight, five and two pairs of epistatic QTLs with significant additive-by-additive (AA) interaction effects were identified for three traits, and the contribution rate were 16.75%、22.36% and 7.55%, respectively.Significant QE interactions were found for nine additive QTLs and seven pairs of epistatic QTLs.The results indicated that the epistatic effects played an important role on the inheritance of grain shape, and the environmental factor had certain effects on the three traits.福建省自然科学基金项目(X0750053);厦门大学科技创新计划项目(XDKJCX20063004)共同资

C_(60)的激光产生与聚合——Ⅱ.微量掺杂物对C_(60)形成的促进作用

在自制的仪器上 ,用高能量密度的脉冲激光束 ,在高真空中直接溅射各种掺杂了微量有机、高分子与无机化合物的单质碳样品 .根据原位记录的飞行时间质谱 ,发现其中某些掺杂物对C60 的形成具有显著的促进作用 .实验结果证实 ,这些掺杂物的促进作用与掺杂物本身的结构无关 ,掺杂物并不提供生成C60 的碳源 ,起促进作用的是其中的某些能与碳原子成键的原子 (或基团 ) ,其中氯原子的效果最为显著 .实验结果揭示了激光溅射下C60 的生成机

稠环烯烃芳香性的碳数规则

稠环烯烃芳香性的碳数规则张强黄伟杰石磊黄荣彬郑兰荪（厦门大学化学系固体表面物理化学国家重点实验室３６１００５）１Ｈｃｋｅｌ规则与其应用范围Ｈüｃｋｅｌ规则是判断环烯烃芳香性的重要规则。这个规则是：π电子数为４ｎ＋２个的环烯烃是芳香性的，而π电子数为..

Mapping QTLs for Rice Grain Shape with QTL×Environment Interactions and Epistatic Effects Analysis

利用广陆矮4号x佳辐占水稻重组自交系构建了SSr标记的遗传图谱.联合2007年和2008年获得的两组稻米粒长(gl)、粒宽(gW)、长宽比(l/W)数据应用混合线性模型方法进行QTl定位,并作加性效应、加性x加性上位互作效应以及加性QTl、上位性QTl与环境的互作效应分析.结果显示;(1)在加性效应分析中两个群体共检测到4个控制粒长的QTl,4个控制粒宽的QTl,5个控制长宽比的QTl,贡献率分别为13.81%、15.36%和16.29%.(2)在上位互作效应分析中两个群体共检测到2对控制粒长的互作QTl,1对控制粒宽的互作QTl,3对控制长宽比的互作QTl,贡献率分别为5.77%、2.59%和7.42%.(3)环境互作检测中,发现共有13个加性QTl和4对QTl的加性x加性上位性与环境产生了互作效应.结果表明,上位性效应和加性效应都影响稻米粒形遗传,QE互作效应也对粒形有着显著的影响.In this study,a recombinant inbred line (RIL) population derived from the indica-indica rice cross ‘Guangluai 4’בJiafuzhan’ was used in mapping of Quantitative trait loci (QTLs).Based on mixed linear model QTLmapper1.6,mapping was carried out for grain shape such as grain length (GL),grain width (GW) and length-width ratio (L/W) in rice in 2007 and 2008.QTLs were determined at the one-locus and two-locus levels,and QTL-by-environment (QE) interactions were analyzed.Four,four and five QTLs were detected to have significant additive effects for GL,GW and L/W,and the contribution rate were 13.81%,15.36% and 16.29%,respectively.Two,one and three pairs of epistatic QTLs with significant additive-by-additive (AA) interaction effects (epistatic effects) were identified for the three traits,and the contribution rate were 5.77%,2.59% and 7.42%,respectively.Significant QE interactions were found for thirteen QTLs with additive effects and four pairs of epistatic QTLs.The results indicated that the epistatic and additive effects played an important role on the inheritance of grain shape,and the environmental factor had significant effects on the three traits.国家863计划项目(2007AA10Z179);福建省科技计划重点项目(2008N0122);厦门大学科技创新项目(XDKJCX20063004

紫外辐射诱导C_(60)聚合的扫描隧道显微研究

C60 molecule was adsorbed on the Au(111)surface and irradiated with UV light.The coalescence under the UV radiation was followed by STM in situ. According to the STMobservation, the coalesced products have larger cages and finally form a film

氯仿至全氯代稠环芳烃的液相电弧合成

以石墨电极在惰性气氛中放电,已成功地合成了C_（60）等碳原子簇。Grosser等人将此反应在氰气与氯气氛中进行,获得了一系列“棒状分子”与全氯代芳烃。我们又将这样的放电反应进一步扩展至溶液体系,将产生原子团簇的物理方法与传统的化学合成方法结合起来。最近,我们分析和研究了在液态的氯仿中放电的产物,在其中先后分离出六氯代苯（Ⅰ）、全

多氯代甲烷在液相电弧中的聚合反应

将氯仿或四氯化碳在液相中以高压电弧放电,得到多种聚合产物。通过对反应产物的分离与分析,发现它们主要是全氯代有机化合物(包括烷烃、烯烃与芳烃)及球烯。由此可以肯定所有反应物在电弧的作用下首先生成二氯卡宾,然后进一步聚合成各种产物。值得注意的是,反应生成的全氯代苊烯、苯并苊烯、碗烯、“半球烯”等均为C_(60)的全氯代碎片,是生成C_(60)的中间产物。其中苊烯或苯并苊烯的生成在体系中引入了五元环,是生成C_(60)的一个关键步骤。据此提出了反应的详细历程,由此可能揭示出C_(60)等球烯的生成过程与机理

基于电子鼻的慢性胃炎气滞证患者常见病位的口腔呼气气味图谱研究

目的:运用电子鼻探讨慢性胃炎气滞证患者常见病位的口腔呼气气味图谱特征。方法:采用证素辨证的方法,筛选出397例慢性胃炎气滞证患者并判断病位证素,同时运用基于阵列式气体传感器技术的医用电子鼻(EN0l1103-A)采集其口腔呼气的气味图谱,选择气味图谱响应曲线的振幅、斜率作为图谱特征参数,借助分类器算法对慢性胃炎气滞证与非气滞证的口腔呼气气味图谱特征进行模式识别,比较慢性胃炎气滞证患者常见病位的口腔呼气气味图谱特征。结果:慢性胃炎气滞证的主要病位证素分布是胃(91.18%)、脾(38.29%)、肝(23.68%);主要病位为胃、脾胃、肝脾胃、肝胃;采用分类器算法对慢性胃炎气滞证的气味图谱进行模式识别时,运用随机森林算法,对气滞证的准确率可以达到65.85%;病位胃组、脾胃组的气味图谱响应曲线B、C、D、E、F、I、J的振幅均显著低于病位肝脾胃组(P<0.01);病位胃组、脾胃组的气味图谱响应曲线C、D、E、F、I的斜率均显著低于病位肝脾胃组(P<0.01),脾胃组曲线A的斜率低于病位肝脾胃组(P<0.05)。结论:运用电子鼻结合模式识别方法可初步判断慢性胃炎气滞证及其不同病位间的口腔呼气气味差异。国家自然科学基金项目(No.81373552);;福建省自然科学基金项目(No.2014J01362);;福建省中医药科研项目(No.wzpw201313);;福建省教育厅A类项目(No.JA14212);;载人航天领域预先研究项目(No.020104)~

Copper(Ⅱ) Ion Coordination-Controlled Twisted Intramolecular Charge Transfer Dual Fluorescence Emission

设计合成了2个分子内扭转电荷转移(TICT)荧光体(1和2),铜离子的配位作用可开关其双重荧光发射。2在乙腈/水溶液(1∶1,V/V)中的双重荧光发射随着铜离子的加入以类似电子转移机制“开-关“形式猝灭,而1在铜离子与其计量比为1之内的乙腈/水溶液(1∶1,V/V)中,其双重荧光发射随着铜离子的加入逐渐猝灭;在计量比之后其长波长的TICT荧光发射随着铜离子的加入逐渐增强。即1的TICT荧光发射以“开-关-开“的机制被铜离子诱导。同时还获得了铜离子与1形成的配合物的晶体结构以及配合物的荧光性质。1H nMr波谱滴定实验表明荧光体的电荷转移程度是影响TICT发射的主要因素,1是一个新的且其TICT发射可以被铜离子调制为“开-关-开“的TICT荧光体。Two twisted intramolecular charge transfer(TICT) fluorophores(1 and 2) were designed and synthesized to control the dual fluorescence emission by Cu2 +coordination.The dual fluorescence of 2 is quenched upon the addition of Cu2+ions in an "on-off" process similar to PET inhibition.The dual fluorescence of 1 exhibits emission quenching initially and then long-wavelength band(TICT band) emission enhancement with "on-off-on" signalling behaviour.The crystal structure of the Cu2+complex with 1 was also obtained, and its fluorescence properties were reported.1H NMR spectral titration results indicate that the degree of charge transfer is a crucial factor for the resulting TICT state emission.Fluorophore 1 is a new TICT compound in which TICT emission can be tuned by copper ions with a dramatic change via "on-off-on" signalling behaviour.CCDC: 899958, Cu2+-1.国家自然科学基金(No.21271150); 国家基础科学人才培养基金(No.J1310024)资助项

Research on the Evolution & Innovation for Modular Product Family

针对当前产品族动态演进机制和系统化创新方法研究的不足,提出模块化产品族在技术层次上的创新演进方法。通过构建产品族的需求—功能—技术(rEQuIrEMEnT-funCTIOn-TECHnOlOgy,r-f-T)映射关系模型,分析当前模块化产品族的技术状况,并通过gM(1,1)模型预测模块化产品族的未来技术重要度情况;在企业内部数据的支持下,通过对模块化产品族初始问题的分析,集成应用创新思维通用理论和传统TrIz(OTSM–TrIz)的问题流网络(PrOblEM flOW nETWOrk,Pfn)技术识别并解决产品族中多个冲突问题;在技术重要度预测和新功能模块—技术关联矩阵(funCTIOn MOdulE-TECHnICAl MATrIX,fMTM)的基础上,以平台比率为依据,通过计算概念化产品族中功能模块的多样性程度,获得概念化产品族规划方案。对小型轮式装载机产品族进行了实例分析,并验证了该方法的有效性。Focusing on the shortage of dynamic evolutionary mechanism and systematic innovation methods of current product family,an innovative and evolutional method at the technical level of modular product family is put forward.The current technical condition of the modular product family is analyzed by constructing requirement-function-technology(R-F-T) mapping model of product family,and the importance of future technology of modular product family is predicted by GM(1,1) model.The multiple conflicts of product family is identified and resolved using PFN technology in the OTSM –TRIZ process,through the analysis of the initial problem of modular product family in support of enterprise data.Moreover,based on prediction of technology importance and the new function module-technical matrix(FMTM),the conceptual planning of product family is obtained by calculating the diversity of function modules of conceptual product family according to platform ratio.An analysis example of product family of small wheel loader show the effectiveness of the method.国家自然科学基金(70772093;71172055);科技部创新方法工作专项(2011M020400);国家科技支撑计划(2011BAF11B00-01);福建省科技重大(2011H6024)资助项