Bioethanol Production from Vineyard Waste by Autohydrolysis Pretreatment and Chlorite Delignification via Simultaneous Saccharification and Fermentation

In this paper, the production of a second-generation bioethanol from lignocellulosic vineyard cutting wastes was investigated in order to define the optimal operating conditions of the autohydrolysis pretreatment, chlorite delignification and simultaneous saccharification and fermentation (SSF). The autohydrolysis of vine-shoot wastes resulted in liquors containing mainly a mixture of monosaccharides, degradation products and spent solids (rich in cellulose and lignin), with potential utility in obtaining valuable chemicals and bioethanol. The autohydrolysis of the vine-shoot wastes was carried out at 165 and 180 °C for 10 min residence time, and the resulted solid and liquid phases composition were analysed. The resulted liquid fraction contained hemicellulosic sugars as a mixture of alpha (α) and beta (β) sugar anomers, and secondary by-products. The solid fraction was delignified using the sodium chlorite method for the separation of lignin and easier access of enzymes to the cellulosic sugars, and then, converted to ethanol by the SSF process. The maximum bioethanol production (6%) was obtained by autohydrolysis (165 °C), chlorite delignification and SSF process at 37 °C, 10% solid loading, 72 h. The principal component analysis was used to identify the main parameters that influence the chemical compositions of vine-shoot waste for different varieties

Characterization of biobriquettes produced from vineyard wastes as a solid biofuel resource

The large amount of biomass waste generated by vineyard pruning causes many environmental concerns. The production of briquettes represents an alternative to obtaining a value-added product. The transformation of vineyard wastes into briquettes could produce a densified product having high energy potential. The study investigates the production and chemical, structural, and thermal characterization of briquettes. The thermogravimetric analysis (TGA) shows that the briquettes have different stages of decomposition depending on temperature, such as drying, heating, devolatilization, and char aggregation. All the briquettes are decomposed around 600 C. The analysis by X-ray diffraction (XRD) shows the crystallinity of briquettes. The pollutant emissions resulted from briquettes burning were measured as 444.7 mg N1m1 nitrogen oxide (NOX), 157.0 mg N1m1 sulphur dioxide (SO2) and 2165.0 mg N1m1 carbon monoxide (CO). The flue gases are below the admitted limits, with the exception of carbon monoxide content due to the incomplete combustion and high lignin content. Therefore, it can be concluded that briquettes produced from vineyard wastes have similar properties to briquettes produced from wood. This study demonstrates the potential of the obtained briquettes to replace the wood or charcoal through a desulphurization method

Copper-releasing, borate-based glasses with antibacterial properties: synthesis and in vitro characterization

In this study, glasses within the system (60-x) B2O3⋅x ZnO⋅34CaO⋅1CuO, with x=5, 10, 15, 20, 25 mol% and with B2O3/ZnO ratios 11; 5; 3; 2; 1.4 have been synthesized and characterized in vitro. After being immersed in simulated body fluid (SBF) and saline solution, weight loss reduction and pH measurments, followed by inductively coupled plasma optical emission spectometry (ICP-OES), scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis were performed, in order to evaluate the changes in glass morphology. In vitro biodegradation and surface reaction were observed in all of the glasses, especially in the x=10, 15, 20 samples. SEM and XRD results revealed the presence of a hydrotalcite-like structure (double layered hydroxid) at the aqueous solution-glass surface interface, while Cu, Zn, Ca and B ions, with proangiogenic properties, were detected in the immersion fluid

Sustainable biomass pellets production using vineyard wastes

Vineyards waste has a great importance as biomass, a renewable source of energy. In this paper eight vine shoot varieties were used for the production of pellets by densification of feedstock materials with four ranges of moisture contents (6–8%, 8–10%, 10–12% and 12–15%). A moisture content of 10% gave durability higher than 97.5% and a calorific value greater than 17 MJ kg−1 and the small durability was obtained for 6–8% moisture. The study shows the significant influence of water during densification. The physicochemical and energetic properties of pellets were evaluated in accordance with ISO 17225-6 (2014). The obtained pellets were also structurally characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). SEM analysis showed the formation of carbon microsphere after pelletization, due to the increase of bulk density and durability of pellets. Also, XRD analysis revealed the crystallinity of cellulose, while TGA analysis showed a total decomposition of pellets. The obtained pellets were burned in a domestic boiler and the flue gases were measured. The preliminary results showed that the vineyard residues had higher emissions, but below the admitted limits, with the exception of carbon monoxide content. The obtained results suggested that the biomass wastes can be used for the production of pellets, aiming to enhance the research for the manufacturing of these sustainable biofuels with some remarks regarding risk of corrosion and slag formation during prolonged use

Spatio-temporal insights into microbiology of the freshwater-to-hypersaline, oxic-hypoxic-euxinic waters of Ursu Lake

Ursu Lake is located in the Middle Miocene salt deposit of Central Romania. It is stratified, and the water column has three distinct water masses: an upper freshwater-to-moderately saline stratum (0–3 m), an intermediate stratum exhibiting a steep halocline (3–3.5 m), and a lower hypersaline stratum (4 m and below) that is euxinic (i.e. anoxic and sulphidic). Recent studies have characterized the lake's microbial taxonomy and given rise to intriguing ecological questions. Here, we explore whether the communities are dynamic or stable in relation to taxonomic composition, geochemistry, biophysics, and ecophysiological functions during the annual cycle. We found: (i) seasonally fluctuating, light-dependent communities in the upper layer (≥0.987–0.990 water-activity), a stable but phylogenetically diverse population of heterotrophs in the hypersaline stratum (water activities down to 0.762) and a persistent plate of green sulphur bacteria that connects these two (0.958–0.956 water activity) at 3–3.5 to 4 m; (ii) communities that might be involved in carbon- and sulphur-cycling between and within the lake's three main water masses; (iii) uncultured lineages including Acetothermia (OP1), Cloacimonetes (WWE1), Marinimicrobia (SAR406), Omnitrophicaeota (OP3), Parcubacteria (OD1) and other Candidate Phyla Radiation bacteria, and SR1 in the hypersaline stratum (likely involved in the anaerobic steps of carbon- and sulphur-cycling); and (iv) that species richness and habitat stability are associated with high redox-potentials. Ursu Lake has a unique and complex ecology, at the same time exhibiting dynamic fluctuations and stability, and can be used as a modern analogue for ancient euxinic water bodies and comparator system for other stratified hypersaline systems

Removal of Cesium and Strontium Ions from Aqueous Solutions by Thermally Treated Natural Zeolite

The radionuclides of cesium (Cs) and strontium (Sr) are dangerous products of nuclear fission that can be accidentally released into wastewater. In the present work, the capacity of thermally treated natural zeolite (NZ) from Macicasu (Romania) to remove Cs+ and Sr2+ ions from aqueous solutions in batch mode was investigated by contacting different zeolite quantities (0.5, 1, and 2 g) of 0.5–1.25 mm (NZ1) and 0.1–0.5 mm (NZ2) particle size fractions with 50 mL working solutions of Cs+ and Sr2+ (10, 50, and 100 mg L−1 initial concentrations) for 180 min. The concentration of Cs in the aqueous solutions was determined by inductively coupled plasma mass spectrometry (ICP-MS), whereas the Sr concentration was determined by inductively coupled plasma optical emission spectrometry (ICP-OES). The removal efficiency of Cs+ varied between 62.8 and 99.3%, whereas Sr2+ ranged between 51.3 and 94.5%, depending on the initial concentrations, the contact time, the amount, and particle size of the adsorbent material. The sorption of Cs+ and Sr2+ was analyzed using the nonlinear form of Langmuir and Freundlich isotherm models and pseudo-first-order (PFO) and pseudo-second-order (PSO) kinetic models. The results indicated that the sorption kinetics of Cs+ and Sr2+ on thermally treated natural zeolite was described by the PSO kinetic model. Chemisorption dominates the retention of both Cs+ and Sr2+ by strong coordinate bonds with an aluminosilicate zeolite skeleton

Investigation of Sterile Mining Dumps Resulting from Ore Exploitation and Processing in Maramures County, Romania

Abandoned sterile dumps can be a significant source of environmental pollution, therefore the distribution of trace elements throughout mining is vital. Monitoring environmental factors in closed mining perimeters aims to track the quality of discharged waters in the emissary and assess acid mine drainage, the quality of the soil and vegetation, stability, and the condition of the land surfaces within the perimeter of the sterile deposits. One of the primary sources of land, water and air pollution is sterile mining dumps. Knowing the source of pollution is the first step in adequately managing the affected areas. This paper investigates the physical–chemical properties and the concentrations of heavy metals in sterile dumps resulting from mining. We studied one sterile dump that was the result of ore processing and whose surface was covered with abandoned mixed ore concentrate (Pb, Zn), located in the Băiuț mining area (Romania), and a second sterile mining dump that was the result of exploration and exploitation work in the Ilba mining area (Romania). In order to determine the physicochemical characteristics of the studied sterile dumps and to determine the concentration of heavy metals, 27 sterile samples and one soil sample were taken from the Băiuț dump. Additionally, 10 sterile samples and one soil sample were collected from the Ilba dump. Aqua regia extractable concentrations of heavy metals were determined by inductively coupled plasma optical emission spectrometry. At the same time, using a portable XRF, we analyzed selected samples from each site for total metal concentrations. Furthermore, from each site, one sample was analyzed by FT–IR spectrometry. The pH values in both sterile dumps were highly acidic (≤3.5) and the content of heavy metals was generally increased

Investigation of Sterile Mining Dumps Resulting from Ore Exploitation and Processing in Maramures County, Romania

Abandoned sterile dumps can be a significant source of environmental pollution, therefore the distribution of trace elements throughout mining is vital. Monitoring environmental factors in closed mining perimeters aims to track the quality of discharged waters in the emissary and assess acid mine drainage, the quality of the soil and vegetation, stability, and the condition of the land surfaces within the perimeter of the sterile deposits. One of the primary sources of land, water and air pollution is sterile mining dumps. Knowing the source of pollution is the first step in adequately managing the affected areas. This paper investigates the physical–chemical properties and the concentrations of heavy metals in sterile dumps resulting from mining. We studied one sterile dump that was the result of ore processing and whose surface was covered with abandoned mixed ore concentrate (Pb, Zn), located in the Băiuț mining area (Romania), and a second sterile mining dump that was the result of exploration and exploitation work in the Ilba mining area (Romania). In order to determine the physicochemical characteristics of the studied sterile dumps and to determine the concentration of heavy metals, 27 sterile samples and one soil sample were taken from the Băiuț dump. Additionally, 10 sterile samples and one soil sample were collected from the Ilba dump. Aqua regia extractable concentrations of heavy metals were determined by inductively coupled plasma optical emission spectrometry. At the same time, using a portable XRF, we analyzed selected samples from each site for total metal concentrations. Furthermore, from each site, one sample was analyzed by FT–IR spectrometry. The pH values in both sterile dumps were highly acidic (≤3.5) and the content of heavy metals was generally increased

REMOVAL OF HEAVY METALS FROM AQUEOUS SOLUTIONS USING ACTIVATED CARBON

A carbon used for the filtration of fresh water was activated using HCl and tested its capacity of heavy metals (Cd, Ni and Pb) removal from aqueous solutions. The initial concentration of heavy metals was 5 mg/L and the adsorption experiments were conducting using different quantity of sorbent (from 2.5 g to 20 g). The equilibrium was touched using the right relation between the sorbent quantity and exposure time. The obtaining activated carbon was successfully applied for adsorptive removal of Cd, Ni and Pb from stock solutions. The degree of decrease of the three metals was in the order of Pb>Cd>Ni