8 research outputs found

    Experience with light dynamic penetration in a landslide locality

    Get PDF
    Because of vital prevention and redevelopment measures in problem localities affected by slope instability, geotechnical investigations must be carried out. One of the applicable methods is Light Dynamic Penetration (LDP). Although it was designed for easy field investigations in planning line structures to identify parameters, such load bearing capacity, and compactness, its use proves to be much wider. Using LDP it is possible to detect the interfaces between the discrete layers, potential slip surfaces, or groundwater level. However, it is important to note that the results of LDP are always related to one point only and to investigate a whole area, a complementary survey is needed. In the paper we report research where we used a geophysical method of Electrical Resistivity Tomography (ERT) to validate the results rendered by Light Dynamic Penetration in a redeveloped post-mining locality characteristic of landslides. The results of both measurement methods were unified for better interpretation and clarification to find out whether LDP is suitable to investigate a landslide locality. It shows that LDP provides relevant information on the massif structure in a given locality, but as opposed to other geophysical methods LDP informs only about one point only. The authors thus recommend carrying out surveys in landslide areas combining LDP and ERT as complementary measurements of groundwater level in the openings made using LDP. Mutually combining these two methods, it is possible to obtain a number of valuable information on landslide conditions (depth and course of shear plane, groundwater level, structure of layers, etc.) and physical-mechanical properties of soils

    Determination of the Uniaxial Compressive Strength of Rocks from the Strength Index

    Get PDF
    The uniaxial compressive strength (UCS) is classified as one of the basic mechanical properties of rocks, which is widely used in mining and construction practice. For example, it allows geomechanics to classify individual rocks and soils into groups with the same or similar mechanical properties. An example is the (RMR) Rock Mass Rating, Barton’s Q system. [1,2]. As a rule, only an indicative determination of the uniaxial compressive strength is sufficient for this classification.The uniaxial compressive strength is determined in the laboratory on regular test pieces. The preparation of these test bodies is often a time-consuming and costly process, and in some cases, the recommended shape cannot be prepared for a small amount of rock sample or, in the case of highly fractured and friable rock. For this reason, alternative methods for determining compressive strength are being sought. These methods are supposed to be faster and cheaper and to provide results directly in situ. The paper presents information obtained from the indirect determination of the uniaxial compressive strength according to the strength index measured with a field press on various rock types from the Czech Republic

    Possibilities for Using Light Dynamic Penetration for Exploration Landslide Areas

    No full text
    Cílem této disertační práce je objasnění využitelnosti lehké dynamické penetrace pro průzkum sesuvného území. Za tímto účelem byly vybrány k řešení této problematiky čtyři lokality ovlivněné svahovými deformacemi. Na každé z nich bylo provedeno množství lehkých dynamických penetračních zkoušek převážně za účelem odhalení potencionálních smykových ploch a doplňujících geotechnických informací (změna fyzikálně mechanických vlastností, hladiny podzemních vod atd.). Zjištěné hodnoty odporů z těchto měření jsou analyzovány v této práci, s cílem zjistit využitelnost této metody pro oblasti zasažené instabilitou. Kvůli lepší interpretaci výsledků jednotlivých penetračních bodů bylo součástí průzkumu každé lokality provedeno doplňující měření pomocí elektrické rezistivní tomografie. Aplikace této geofyzikální metody nám poskytla interpretaci naměřených dat v podobě profilů, které bylo možno porovnat s výsledky jednotlivých bodů získaných ze zkoušek lehké dynamické penetrace. Na základě poznatků získaných v rámci řešení této disertační práce je možné shrnout případné využití lehké dynamické penetrace pro posouzení sesuvných území.The clarifiaction of a light dynamic penetration usability for a landslide area research is an aim of this dissertation. Four locations affected by this slope deformations were chosen for this purpose. A specific amount of a light dynamic penetraion tests were made at each of this locations to reveal potential surface of sliding and completive geotechnical information (change of physico-mechanical features, underground water level etc.). Proven resistence values from this measurings are analyzed in this thesis to find out an usability of this method for locations affected by instability. An additional measuring with electrical resistence tomography was done as a part of a research because of better result interpretation of signle penetration points. Aplication of this geophysical method provided us an interpretation of measuerd data as profiles, which was possible to compare with the separate point results gained from the light dynamic penetraion tests. The appropriate light dynamic penetraion usage for a landslide areas assesment is possible to summarize on the basis of knowledge gained from a resolution of this dissertation thesis.542 - Katedra hornického inženýrství a bezpečnostivyhově

    System of mucking and evaluation of its capacity at the Mining plant 3, OKD, a.s.

    No full text
    Import 02/11/2016V předložené diplomové práci je popsán princip odtěžení a zpracováno posouzení kapacit jednotlivých větví na Důlním závodu 3, OKD, a.s. Úvodní část práce se zabývá jak samotnou historií důlního závodu, tak hlavně důlně geologickými podmínkami v dané lokalitě. Další kapitola se věnuje samotnému popisu dopravního systému hmot na zmiňovaném závodě. Je zde popsána jak vertikální, tak horizontální a úklonná doprava. Následující kapitola je stěžejní pro celou práci. Je zde provedena výpočetní kontrola kapacity odtěžení pásových linek podle nových požadavků OKD na jednotlivé pásové dopravníky. V poslední kapitole jsou shrnuta technická opatření, která by byla nutná v případě nevyhovujících kapacit dopravníků a jejich ekonomické aspekty pro Důlní závod 3, OKD, a.s.In submitted thesis is described principle of excavation mucking and assessment of capacities of each invdividual strands of Mining plant 3, OKD, a.s. Introduction part is dealing with history of mining plant, and also mine-geological conditions in this area. In the next chapter is described mining systém of mass on this particular establishment. There is also mentioned vertical, horizontal and hading transfer. Following chapter is the key of whole thesis. It concerned computational control of capacities mucking belt lines, according to new requires OKD on individuals „conveyor belt“. In the last chapter are summarized technical measures, which would be necessary in case of inconvenient capacities conveyors and their economical aspects for Mining plant 3, OKD, a.s.Prezenční542 - Institut hornického inženýrství a bezpečnostivýborn

    Importance of the Mohelnice Furrow for Geology

    No full text
    Import 11/07/2012V předložené bakalářské práci je zpracována geologická charakteristika daného geomorfologického území Mohelnické brázdy, se kterou pak úzce souvisí i její význam pro těžbu nerostných surovin. První část práce zahrnuje geomorfologické, regionální a geologické vymezení Mohelnické brázdy spolu s hydrologií a klimatem v dané lokalitě. Další část je zaměřena na význam brázdy z hlediska těžby a to jak z historického, tak i ze současného hlediska. Závěr práce je zaměřen na charakteristiku mikroregionu Mohelnice s jeho turistickými zajímavostmi a památkami.This bachelor’s thesis handles the geological characterics of the geomorphological territory of the Mohelnice furrow, to which the mining of raw materials is related. The first part of the thesis includes the geomorphological, regional and geological definition of the Mohelnice furrow together with hydrology and the climate of the location. The next portion is focused on the meaning of the furrow from both the historical and current view of mining. The conclusion focuses on the characteristics of the Mohelnice microregion and its touristic points of interest and sights.Prezenční541 - Institut geologického inženýrstvívýborn

    THE MODULAR SOLUTIONS OF INTERMODAL TERMINAL

    No full text
    V příspěvku se autoři zabývají modulovým řešením návrhu nového terminálu kombinované přepravy se všemi dopady na používanou technologii překládky. Autoři pak dle navržených modulů terminálu provedli zhodnocení vlastních návrhů řešení, zejména po stránce technologické.The first part of the paper analyzes several new proposals to modular terminal solutions and their influences to technology of transshipment. The aim is to compare the individual technologies, one of them selected and introduced to the modular intermodal terminal. In conclusion the author provides an evaluation of suggested proposal solutions, mainly focusing on technological

    THE MODULAR SOLUTIONS OF INTERMODAL TERMINAL

    No full text
    V příspěvku se autoři zabývají modulovým řešením návrhu nového terminálu kombinované přepravy se všemi dopady na používanou technologii překládky. Autoři pak dle navržených modulů terminálu provedli zhodnocení vlastních návrhů řešení, zejména po stránce technologické.The first part of the paper analyzes several new proposals to modular terminal solutions and their influences to technology of transshipment. The aim is to compare the individual technologies, one of them selected and introduced to the modular intermodal terminal. In conclusion the author provides an evaluation of suggested proposal solutions, mainly focusing on technological
    corecore