New alien mediterranean biodiversity records (March 2020)

none26siThe current article presents 18 new records from seven Mediterranean countries. These records include one rhodophyte, four nudibranchs, two crustaceans, one stingray and 10 bony fishes. They are grouped by country as follows: Lebanon-first record of the Striped bass Morone saxatilis, the stingray Himantura leoparda, the Areolate grouper Epinephelus areolatus and the Spot-fin porcupinefish Diodon hystrix from various parts of the country; Turkey-first record of the invasive red alga Grateloupia turuturu from the sea of Marmara (region of Bandirma), the sea slug Goniobranchus obsoletus and the crab Arcania brevifrons from the Gulf of Antalya and the cladoceran Pleopis schmackeri from several locations along the Aegean Sea; Cyprus-first record of the alien sea slug Berthellina citrina from the region of Cape Greco and an observation of a butterflyfish Heniochus sp. from the northeastern side of the island; Greece-first record of the alien sea slug Anteaeolidiella lurana from the region of Heraklion in Crete and the record of the Atlantic spadefish Chaetodipterus faber and the Black surgeonfish Acanthurus cfr gahhm from Salamina Island; Slovenia-first record of the alien sea slug Thecacera pennigera from Izola; Italy-first record of the hybrid Striped bass (Morone saxatilis x Morone chrysops) from the northern Tyrrhenian Sea and a first record of the goldfish Carassius auratus from the region of Apulia; Libya-first record of the Red Sea goatfish Parupeneus forsskali and the African surgeonfish Acanthurus monroviae, respectively from the eastern (Al-Tamimi area) and the western shore (Al-Khums area).openBariche M.; Al-Mabruk S.A.A.; Ates M.A.; Buyuk A.; Crocetta F.; Dritsas M.; Edde D.; Fortic A.; Gavriil E.; Gerovasileiou V.; Gokoglu M.; Huseyinoglu M.F.; Karachle P.K.; Kleitou P.; Kurt T.T.; Langeneck J.; Lardicci C.; Lipej L.; Pavloudi C.; Pinna M.; Rizgalla J.; Ozen M.R.; Sedano F.; Taskin E.; Yildiz G.; Zangaro F.Bariche, M.; Al-Mabruk, S. A. A.; Ates, M. A.; Buyuk, A.; Crocetta, F.; Dritsas, M.; Edde, D.; Fortic, A.; Gavriil, E.; Gerovasileiou, V.; Gokoglu, M.; Huseyinoglu, M. F.; Karachle, P. K.; Kleitou, P.; Kurt, T. T.; Langeneck, J.; Lardicci, C.; Lipej, L.; Pavloudi, C.; Pinna, M.; Rizgalla, J.; Ozen, M. R.; Sedano, F.; Taskin, E.; Yildiz, G.; Zangaro, F

Evaluation of planar silicon pixel sensors with the RD53A readout chip for the Phase-2 Upgrade of the CMS Inner Tracker

The Large Hadron Collider at CERN will undergo an upgrade in order to increase its luminosity to 7.5 × 10³⁴ cm⁻²s⁻¹. The increased luminosity during this High-Luminosity running phase, starting around 2029, means a higher rate of proton-proton interactions, hence a larger ionizing dose and particle fluence for the detectors. The current tracking system of the CMS experiment will be fully replaced in order to cope with the new operating conditions. Prototype planar pixel sensors for the CMS Inner Tracker with square 50 μm × 50 μm and rectangular 100 μm × 25 μm pixels read out by the RD53A chip were characterized in the lab and at the DESY-II testbeam facility in order to identify designs that meet the requirements of CMS during the High-Luminosity running phase. A spatial resolution of approximately 3.4 μm (2 μm) is obtained using the modules with 50 μm × 50 μm (100 μm × 25 μm) pixels at the optimal angle of incidence before irradiation. After irradiation to a 1 MeV neutron equivalent fluence of Φeq = 5.3 × 10¹⁵ cm⁻², a resolution of 9.4 μm is achieved at a bias voltage of 800 V using a module with 50 μm × 50 μm pixel size. All modules retain a hit efficiency in excess of 99% after irradiation to fluences up to 2.1 × 10¹⁶ cm⁻². Further studies of the electrical properties of the modules, especially crosstalk, are also presented in this paper

FPGA Implementation of a Statistical Saturation Attack against PRESENT

Statistical attacks against block ciphers usually exploit “characteristics”. A characteristic essentially defines a relation between (parts of) the block cipher’s inputs, outputs and intermediate values. Intuitively, a good characteristic is one for which the relation between the cipher’s inputs and outputs exhibit a significant deviation from the uniform distribution. Due to its intensive computational complexity, the search for good characteristics generally relies on heuristics, e.g. based on a branch-and-bound algorithm. But the use of such heuristics directly raises the question whether these good characteristics remain good, as the number of cipher rounds increases. This question relates to the so-called hull effect, expressing the idea that in a practically secure cipher, only the combination of many characteristics can explain the statistical deviations exploited in cryptanalysis. As characteristics are also a central tool when estimating the data complexities of statistical attacks, determining whether a hull effect can be observed is essential in the security evaluation of a block cipher. Unfortunately, this is again a computationally intensive task, as it ideally requires to sample over the full input space. In this paper, we consequently discuss the interest of hardware assistance, in order to improve the understanding of statistical attacks against block ciphers. More precisely, we propose an FPGA design that allowed us to evaluate a statistical saturation attack against the block cipher PRESENT, for overall complexities up to 250. Compared to previous software solutions, it corresponds to an increase of the maximum data complexity experimentally reached up to now by a factor 214. Our experiments confirm that up to 19 rounds of PRESENT can be broken with 248 plaintext/ciphertext pairs. They also serve as a basis for discussing the statistical hull effect and suggest that 31-round PRESENT should be safe against such statistical attacks

Linear (Hull) and Algebraic Cryptanalysis of the Block Cipher PRESENT

The contributions of this paper include the first linear hull and a revisit of the algebraic cryptanalysis of reduced-round variants of the block cipher PRESENT, under known-plaintext and ciphertext-only settings. We introduce a pure algebraic cryptanalysis of 5-round PRESENT and in one of our attacks we recover half of the bits of the key in less than three minutes using an ordinary desktop PC. The PRESENT block cipher is a design by Bogdanov et al., announced in CHES 2007 and aimed at RFID tags and sensor networks. For our linear attacks, we can attack 25-round PRESENT with the whole code book, 2 96.68 25round PRESENT encryptions, 2 40 blocks of memory and 0.61 success rate. Further we can extend the linear attack to 26-round with small success rate. As a further contribution of this paper we computed linear hulls in practice for the original PRESENT cipher, which corroborated and even improved on the predicted bias (and the corresponding attack complexities) of conventional linear relations based on a single linear trail

Multiple differential cryptanalysis: Theory and practice

Abstract. Differential cryptanalysis is a well-known statistical attack on block ciphers. We present here a generalisation of this attack called multiple differential cryptanalysis. We study the data complexity, the time complexity and the success probability of such an attack and we experimentally validate our formulas on a reduced version of PRESENT. Finally, we propose a multiple differential cryptanalysis on 18-round PRESENT for both 80-bit and 128-bit master keys

New Mediterranean Biodiversity Records (October, 2014)

The Collective Article 'New Mediterranean Biodiversity Records' of the Mediterranean Marine Science journal offers the means to publish biodiversity records in the Mediterranean Sea. The current article is divided in two parts, for records of alien and native species respectively. The new records of alien species include: the red alga Asparagopsis taxiformis (Crete and Lakonikos Gulf, Greece); the red alga Grateloupia turuturu (along the Israeli Mediterranean shore); the mantis shrimp Clorida albolitura (Gulf of Antalya, Turkey); the mud crab Dyspanopeus sayi (Mar Piccolo of Taranto, Ionian Sea); the blue crab Callinectes sapidus (Chios Island, Greece); the isopod Paracerceis sculpta (northern Aegean Sea, Greece); the sea urchin Diadema setosum (Gökova Bay, Turkey); the molluscs Smaragdia souverbiana, Murex forskoehlii, Fusinus verrucosus, Circenita callipyga, and Aplysia dactylomela (Syria); the cephalaspidean mollusc Haminoea cyanomarginata (Baia di Puolo, Massa Lubrense, Campania, southern Italy); the topmouth gudgeon Pseudorasbora parva (Civitavecchia, Tyrrhenian Sea); the fangtooth moray Enchelycore anatina (Plemmirio marine reserve, Sicily); the silver-cheeked toadfish Lagocephalus sceleratus (Saros Bay, Turkey; and Ibiza channel, Spain); the Indo-Pacific ascidian Herdmania momus in Kastelorizo Island (Greece); and the foraminiferal Clavulina multicamerata (Saronikos Gulf, Greece). The record of L. sceleratus in Spain consists the deepest (350-400m depth) record of the species in the Mediterranean Sea. The new records of native species include: first record of the ctenophore Cestum veneris in Turkish marine waters; the presence of Holothuria tubulosa and Holothuria polii in the Bay of Igoumenitsa (Greece); the first recorded sighting of the bull ray Pteromylaeus bovinus in Maltese waters; and a new record of the fish Lobotes surinamensis from Maliakos Gulf

Measurement of the fractional radiation length of a pixel module for the CMS Phase-2 upgrade via the multiple scattering of positrons

High-luminosity particle collider experiments such as the ones planned at the High-Luminosity Large Hadron Collider require ever-greater vertexing precision of the tracking detectors, necessitating also reductions in the material budget of the detectors. Traditionally, the fractional radiation length ($x/X_0$) of detectors is either estimated using known properties of the constituent materials, or measured in dedicated runs of the final detector. In this paper, we present a method of direct measurement of the material budget of a CMS prototype module designed for the Phase-2 upgrade of the CMS detector using a 40-65 MeV positron beam. A total of 630 million events were collected at the Paul Scherrer Institut PiE1 experimental area using a three-plane telescope consisting of the prototype module as the central plane, surrounded by two MALTA monolithic pixel detectors. Fractional radiation lengths were extracted from scattering angle distributions using the Highland approximation for multiple scattering. A statistical technique recovered runs suffering from trigger desynchronisation, and several corrections were introduced to compensate for local inefficiencies related to geometric and beam shape constraints. An overall average $x/X_0$ of $(0.84 \pm 0.10)$\% across the surveyed regions was measured, which is compatible with an empirical estimate of 0.825\% computed from known material properties. Higher-granularity maps of the fractional radiation length were produced for both rectangular regions and regions of uniform material composition. The results bode well for the CMS Phase-2 upgrade modules, which will play a key role in the minimisation of the material budget of the upgraded detector.High-luminosity particle collider experiments such as theones planned at the High-Luminosity Large Hadron Collider requireever-greater vertexing precision of the tracking detectors,necessitating reductions in the material budget of the detectors.Traditionally, the fractional radiation length (x/X$_{0}$) ofdetectors is either estimated using known properties of theconstituent materials, or measured in dedicated runs of the finaldetector. In this paper, we present a method of direct measurementof the material budget of a CMS prototype module designed for thePhase-2 upgrade of the CMS detector using a 40–65 MeV positronbeam. A total of 630 million events were collected at the PaulScherrer Institut PiE1 experimental area using a three-planetelescope consisting of the prototype module as the central plane,surrounded by two MALTA monolithic pixel detectors. Fractionalradiation lengths were extracted from scattering angle distributionsusing the Highland approximation for multiple scattering. Astatistical technique recovered runs suffering from triggerdesynchronisation, and several corrections were introduced tocompensate for local inefficiencies related to geometric and beamshape constraints. Two regions of the module were surveyed andyielded average x/X$_{0}$ values of (0.72 ± 0.05)% and(0.95 ± 0.09)%, which are compatible with empirical estimatesfor these regions computed from known material properties of 0.753%and 0.892%, respectively. Two types of higher-granularity maps ofthe fractional radiation length were produced, subdivided eitherinto rectangular regions of uniform size, or polygonal-shapedregions of uniform material composition. The results bode well forthe CMS Phase-2 upgrade modules, which will play a key role in theminimisation of the material of the upgraded detector.High-luminosity particle collider experiments such as the ones planned at the High-Luminosity Large Hadron Collider require ever-greater vertexing precision of the tracking detectors, necessitating also reductions in the material budget of the detectors. Traditionally, the fractional radiation length ($x/X_0$) of detectors is either estimated using known properties of the constituent materials, or measured in dedicated runs of the final detector. In this paper, we present a method of direct measurement of the material budget of a CMS prototype module designed for the Phase-2 upgrade of the CMS detector using a 40-65 MeV positron beam. A total of 630 million events were collected at the Paul Scherrer Institut PiE1 experimental area using a three-plane telescope consisting of the prototype module as the central plane, surrounded by two MALTA monolithic pixel detectors. Fractional radiation lengths were extracted from scattering angle distributions using the Highland approximation for multiple scattering. A statistical technique recovered runs suffering from trigger desynchronisation, and several corrections were introduced to compensate for local inefficiencies related to geometric and beam shape constraints. Two regions of the module were surveyed and yielded average $x/X_0$ values of $(0.72 \pm 0.05)\%$ and $(0.95 \pm 0.09)\%$, which are compatible with empirical estimates for these regions computed from known material properties of 0.753% and 0.892%, respectively. Higher-granularity maps of the fractional radiation length were produced for both rectangular regions and regions of uniform material composition. The results bode well for the CMS Phase-2 upgrade modules, which will play a key role in the minimisation of the material budget of the upgraded detector

Evaluation of HPK n+n^+-pp planar pixel sensors for the CMS Phase-2 upgrade

To cope with the challenging environment of the planned high luminosity upgrade of the Large Hadron Collider (HL-LHC), scheduled to start operation in 2029, CMS will replace its entire tracking system. The requirements for the tracker are largely determined by the long operation time of 10~years with an instantaneous peak luminosity of up to $7.5\times 10^{34}$~cm$^{-2}$s$^{-1}$ in the ultimate performance scenario. Depending on the radial distance from the interaction point, the silicon sensors will receive a particle fluence corresponding to a non-ionizing energy loss of up to $\Phi_{\text{eq}} = 3.5\times 10^{16}$~cm$^{-2}$. This paper focuses on planar pixel sensor design and qualification up to a fluence of $\Phi_{\text{eq}} = 1.4\times 10^{16}$~cm$^{-2}$. For the development of appropriate planar pixel sensors an R\&D program was initiated, which includes $n^+$-$p$ sensors on 150 mm (6'') wafers with an active thickness of 150~$\mu$m with pixel sizes of $100\times 25$~$\mu$m$^2$ and $50\times 50$~$\mu$m$^2$ manufactured by Hamamatsu Photonics K.K.\ (HPK). Single chip modules with ROC4Sens and RD53A readout chips were made. Irradiation with protons and neutrons, as well was an extensive test beam campaign at DESY were carried out. This paper presents the investigation of various assemblies mainly with ROC4Sens readout chips. It demonstrates that multiple designs fulfill the requirements in terms of breakdown voltage, leakage current and efficiency. The single point resolution for $50\times 50$~$\mu$m$^2$ pixels is measured as 4.0~$\mu$m for non-irradiated samples, and 6.3~$\mu$m after irradiation to $\Phi_{\text{eq}} = 7.2\times 10^{15}$~cm$^{-2}$.To cope with the challenging environment of the planned high luminosity upgrade of the Large Hadron Collider (HL-LHC), sched- uled to start operation in 2029, CMS will replace its entire tracking system. The requirements for the tracker are largely determined by the long operation time of 10 years with an instantaneous peak luminosity of up to 7.5 × 1034 cm−2 s−1 in the ultimate perfor- mance scenario. Depending on the radial distance from the interaction point, the silicon sensors will receive a particle fluence corresponding to a non-ionizing energy loss of up to Φeq = 3.5 × 1016 cm−2. This paper focuses on planar pixel sensor design and qualification up to a fluence of Φeq = 1.4 × 1016 cm−2. For the development of appropriate planar pixel sensors an R&D program was initiated, which includes n+-p sensors on 150 mm (6”) wafers with an active thickness of 150 μm with pixel sizes of 100 × 25 μm2 and 50 × 50 μm2 manufactured by Hamamatsu. Single chip modules with ROC4Sens and RD53A readout chips were made. Irradiation with protons and neutrons, as well was an extensive test beam campaign at DESY were carried out. This paper presents the investigation of various assemblies mainly with ROC4Sens readout chips. It demonstrates that multiple designs fulfill the requirements in terms of breakdown voltage, leakage current and efficiency. The single point resolution for 50 × 50 μm2 pixels is measured as 4.0 μm for non-irradiated samples, and 6.3 μm after irradiation to Φeq = 7.2 × 1015 cm−2.To cope with the challenging environment of the planned high luminosity upgrade of the Large Hadron Collider (HL-LHC), scheduled to start operation in 2029, CMS will replace its entire tracking system. The requirements for the tracker are largely determined by the long operation time of 10 years with an instantaneous peak luminosity of up to 7.5 × 1034cm−2s−1 in the ultimate performance scenario. Depending on the radial distance from the interaction point, the silicon sensors will receive a particle fluence corresponding to a non-ionising energy loss of up to Φeq= 3.5 × 1016cm−2. This paper focuses on planar pixel sensor design and qualification up to a fluence of Φeq = 1.4 × 1016cm−2. For the development of appropriate planar pixel sensors an R&D program was initiated, which includes n+-p sensors on 150mm (6”) wafers with an active thickness of 150µm with pixel sizes of 100×25 µm2 and 50×50 µm2 manufactured by Hamamatsu Photonics K.K. (HPK). Single chip modules with ROC4Sens and RD53A readout chips were made. Irradiation with protons and neutrons, as well was an extensive test beam campaign at DESY were carried out. This paper presents the investigation of various assemblies mainly with ROC4Sens readout chips. It demonstrates that multiple designs fulfil the requirements in terms of breakdown voltage, leakage current and efficiency. The single point resolution for 50×50 µm2 pixels is measured as 4.0µm for non-irradiated samples, and 6.3µm after irradiation to Φeq = 7.2 × 1015cm−2