1,182 research outputs found
Environmental effects of SPS: The middle atmosphere
The heavy lift launch vehicle associated with the solar power satellite (SPS) would deposit in the upper atmosphere exhaust and reentry products which could modify the composition of the stratosphere, mesosphere, and lower ionosphere. In order to assess such effects, atmospheric model simulations were performed, especially considering a geographic zone centered at the launch and reentry latitudes
Stratospheric aerosol modification by supersonic transport operations with climate implications
The potential effects on stratospheric aerosois of supersonic transport emissions of sulfur dioxide gas and submicron size soot granules are estimated. An interactive particle-gas model of the stratospheric aerosol is used to compute particle changes due to exhaust emissions, and an accurate radiation transport model is used to compute the attendant surface temperature changes. It is shown that a fleet of several hundred supersonic aircraft, operating daily at 20 km, could produce about a 20% increase in the concentration of large particles in the stratosphere. Aerosol increases of this magnitude would reduce the global surface temperature by less than 0.01 K
Thermal Frontal Polymerization with a Thermally Released Redox Catalyst
We studied thermal frontal polymerization using a redox
systemin an attempt to lower the temperature of the frontally
polymerizable system while increasing the front velocity so as to
obtain a self-sustaining front in a thinner layer than without the
redox components. A cobalt-containing polymer with a melting
point of 63 C (Intelimer 6050X11) and cumene hydroperoxide
were used with a triacrylate. The use of the Intelimer decreased
the front velocity but allowed fronts to propagate in thinner layers
and withmore filler while still having a pot life of days. Nonplanar
modes of propagation occurred. Fronts propagated faster when
6-O-palmitoyl-L-ascorbic acid was used as a reductant. Interestingly,
fronts were also faster with the reductant even without the
Intelimer if kaolin clay was the filler; however, the pot life was significantly
reduce
An analysis tool for collision avoidance manoeuvres using aerodynamic drag
Aerodynamic collision avoidance manoeuvres provide an opportunity for
satellites in Low Earth Orbits to reduce the risk during close encounters. With
rising numbers of satellites and objects in orbit, satellites experience close
encounters more frequently. Especially those satellites without thrusting
capabilities face the problem of not being able to performimpulsive evasive
manoeuvres. For satellites in Low Earth Orbits, though, perturbing forces due
to aerodynamic drag may be used to influence their trajectories, thus offering
a possibility to avoid collisions. This work introduces a tool for the analysis
of aerodynamic collision avoidance manoeuvres. Current space-weather data are
employed to estimate the density the satellite encounters. Achievable in-track
separation distances following a variation of the ballistic coefficient through
a change in attitude are then derived by evaluating an analytical equation from
literature. Considering additional constraints for the attitude, e.g., charging
phases, and uncertainties in the used parameters, the influence of a manoeuvre
on the conjunction geometry and the collision probability is examined. The
university satellite Flying Laptop of the University of Stuttgart is used as an
exemplary satellite for analysis, which show the general effectiveness of
evasive manoeuvres employing aerodynamic drag. First manoeuvring strategies can
be deducted and the influence of parameter uncertainties is assessed.Comment: 18 pages, 13 figure
Evidence for the Existence of an Effective Interfacial Tension between Miscible Fluids: Isobutyric Acid-Water and 1-Butanol-Water in a Spinning-Drop Tensiometer
We report definitive evidence for an effective interfacial tension between two types of miscible fluids using spinning-drop tensiometry (SDT). Isobutyric acid (IBA) and water have an upper critical solution temperature (UCST) of 26.3 degrees C. We created a drop of the IBA-rich phase in the water-rich phase below the UCST and then increased the temperature above it. Long after the fluids have reached thermal equilibrium, the drop persists. By plotting the inverse of the drop radius cubed (r(-3)) vs the rotation rate squared (omega(2)), we confirmed that an interfacial tension exists and estimated its value. The transition between the miscible fluids remained sharp instead of becoming more diffuse, and the drop volume decreased with time. We observed droplet breakup via the Rayleigh-Tomotika instability above the UCST when the rotation rate was decreased by 80%, again demonstrating the existence of an effective inter-facial tension. When pure IBA was injected into water above the UCST, drops formed inside the main drop even as the main drop decreased in volume with time. We also studied 1-butanol in water below the solubility limit. Effective interfacial tension values measured over time were practically constant, while the interface between the two phases remains sharp as the volume of the drop declines. The effective interfacial tension was found to be insensitive to changes in temperature and always larger than the equilibrium interfacial tension. Although these results may not apply to all miscible fluids, they clearly show that an effective interfacial tension can exist and be measured by SDT for some systems
The Atmospheric Effects of Stratospheric Aircraft: a First Program Report
Studies have indicated that, with sufficient technology development, high speed civil transport aircraft could be economically competitive with long haul subsonic aircraft. However, uncertainty about atmospheric pollution, along with community noise and sonic boom, continues to be a major concern; and this is addressed in the planned 6 yr HSRP begun in 1990. Building on NASA's research in atmospheric science and emissions reduction, the AESA studies particularly emphasizing stratospheric ozone effects. Because it will not be possible to directly measure the impact of an HSCT aircraft fleet on the atmosphere, the only means of assessment will be prediction. The process of establishing credibility for the predicted effects will likely be complex and involve continued model development and testing against climatological patterns. Lab simulation of heterogeneous chemistry and other effects will continue to be used to improve the current models
Population trends and urbanization. Simulating density effects using a local regression approach
7siopenDensity-dependent population growth regulates long-term urban expansion and shapes distinctive socioeconomic trends. Despite a marked heterogeneity in the spatial distribution of the resident population, Mediterranean European countries are considered more homogeneous than countries in other European regions as far as settlement structure and processes of metropolitan growth are concerned. However, rising socioeconomic inequalities among Southern European regions reflect latent demographic and territorial transformations that require further investigation. An integrated assessment of the spatio-temporal distribution of resident populations in more than 1000 municipalities (1961-2011) was carried out in this study to characterize density-dependent processes of metropolitan growth in Greece. Using geographically weighted regressions, the results of our study identified distinctive local relationships between population density and growth rates over time. Our results demonstrate that demographic growth rates were non-linearly correlated with other variables, such as population density, with positive and negative impacts during the first (1961-1971) and the last (2001-2011) observation decade, respectively. These findings outline a progressive shift over time from density-dependent processes of population growth, reflecting a rapid development of large metropolitan regions (Athens, Thessaloniki) in the 1960s, to density-dependent processes more evident in medium-sized cities and accessible rural regions in the 2000s. Density-independent processes of population growth have been detected in the intermediate study period (1971-2001). This work finally discusses how a long-term analysis of demographic growth, testing for density-dependent mechanisms, may clarify the intrinsic role of population concentration and dispersion in different phases of the metropolitan cycle in Mediterranean Europe.openPolinesi G.; Recchioni M.C.; Turco R.; Salvati L.; Rontos K.; Rodrigo-Comino J.; Benassi F.Polinesi, G.; Recchioni, M. C.; Turco, R.; Salvati, L.; Rontos, K.; Rodrigo-Comino, J.; Benassi, F
A nonlinear Lagrangian particle model for grains assemblies including grain relative rotations
International audienceWe formulate a discrete Lagrangian model for a set of interacting grains, which is purely elastic. The considered degrees of freedom for each grain include placement of barycenter and rotation. Further, we limit the study to the case of planar systems. A representative grain radius is introduced to express the deformation energy to be associated to relative displacements and rotations of interacting grains. We distinguish inter‐grains elongation/compression energy from inter‐grains shear and rotations energies, and we consider an exact finite kinematics in which grain rotations are independent of grain displacements. The equilibrium configurations of the grain assembly are calculated by minimization of deformation energy for selected imposed displacements and rotations at the boundaries. Behaviours of grain assemblies arranged in regular patterns, without and with defects, and similar mechanical properties are simulated. The values of shear, rotation, and compression elastic moduli are varied to investigate the shapes and thicknesses of the layers where deformation energy, relative displacement, and rotations are concentrated. It is found that these concentration bands are close to the boundaries and in correspondence of grain voids. The obtained results question the possibility of introducing a first gradient continuum models for granular media and justify the development of both numerical and theoretical methods for including frictional, plasticity, and damage phenomena in the proposed model
Resultados econômicos da produção de tilápia Gift, Supreme e Chitralada, utilizando duas frequencias alimentares.
- …