Upside-Down Gore Excluder as an Endoprosthesis for Aortoiliac Aneurysm Exclusion:A Retrospective Multicenter Study

Objective: The upside-down configuration of a Gore Excluder contralateral leg endoprosthesis has been used to overcome diameter differences in the endovascular treatment of aortoiliac aneurysms. Our goal was not to describe the technique but to study the applicability and safety. Material and methods: Patients were retrospectively enrolled. The indication and details of the procedure were at the discretion of the treating physicians. A case report form was completed including baseline characteristics, indication for treatment, procedural data, and outcomes during follow-up. Results: A total of 31 subjects were enrolled with a range of indications, including 3 patients treated in the emergency setting (9.7%). In 64.5% (n=20), it was a primary intervention for a common iliac aneurysm (n=10), internal iliac aneurysm (n=4), or abdominal aortic aneurysm (n=6). In 11 subjects (35.5%), treatment was performed after previous aortoiliac interventions, including anastomotic iliac artery aneurysm (n=5), type III endoleak (n=3), and endograft thrombus (n=3). Median follow-up was 13 months (range=1-142 months). During follow-up, 2 patients required an upside-down contralateral leg–related secondary intervention, one for an occlusion and another for a type Ia endoleak. There was no type Ib or III endoleak, and no migration, kinking/stenosis, or conversion to open repair was observed. The aneurysm-related mortality was 3.3% (n=1). Conclusion: An upside-down contralateral leg is a valuable technique that can be used to achieve adequate aneurysm exclusion or resolve complications. It is associated with a limited number of complications. Clinical impact: This article studies the use of an upside-down iliac endograft. We describe a wide range of indications in which this previously published technique has been applied. In elective and acute settings and as primary and revision intervention an upside-down iliac endograft was performed successfully. Furthermore, follow-up data is presented showing the effectiveness of the technique. Knowledge of this procedure is a valuable addition to the skillset of every interventionalist.</p

Intraperitoneal photodynamic therapy of the rat CC531 adenocarcinoma.

The goal of this study was to investigate the efficacy of photodynamic therapy (PDT) of a single tumour growing intraperitoneally. For this purpose the CC531 colon carcinoma, implanted in an intraperitoneal fat pad of Wag/RijA rats, was treated with intraperitoneal photodynamic therapy (IPPDT) using Photofrin as the photosensitiser. Two illumination techniques have been compared. An invasive illumination technique using Perspex blocks to illuminate 30 cm2 of the lower abdomen gave a significant delay in tumour growth with 25 J cm-2 applied 1 day after Photofrin. A minimally invasive illumination technique using a balloon catheter to illuminate 14 cm2 resulted in an equivalent growth delay with 75 J cm-2. The route of administration of the photosensitiser did not influence regrowth times of the tumour. Mitomycin C (MMC), a bioreductive agent, was used to exploit the known PDT-induced hypoxia. The combination of IPPDT with MMC resulted in an increased tumoricidal effect. In conclusion, IPPDT led to a significant growth delay for a single tumour implanted intraperitoneally and repetition of the PDT treatment was possible using a minimally invasive illumination technique. Repeated treatments resulted in increased tumour response

Trapping of drops by wetting defects

Controlling the motion of drops on solid surfaces is crucial in many natural phenomena and technological processes including the collection and removal of rain drops, cleaning technology and heat exchangers. Topographic and chemical heterogeneities on solid surfaces give rise to pinning forces that can capture and steer drops in desired directions. Here we determine general physical conditions required for capturing sliding drops on an inclined plane that is equipped with electrically tunable wetting defects. By mapping the drop dynamics on the one-dimensional motion of a point mass, we demonstrate that the trapping process is controlled by two dimensionless parameters, the trapping strength measured in units of the driving force and the ratio between a viscous and an inertial time scale. Complementary experiments involving superhydrophobic surfaces with wetting defects demonstrate the general applicability of the concept. Moreover, we show that electrically tunable defects can be used to guide sliding drops along actively switchable tracks—with potential applications in microfluidic

Wood Dust in Joineries and Furniture Manufacturing: An Exposure Determinant and Intervention Study.

: To assess wood dust exposures and determinants in joineries and furniture manufacturing and to evaluate the efficacy of specific interventions on dust emissions under laboratory conditions. Also, in a subsequent follow-up study in a small sample of joinery workshops, we aimed to develop, implement, and evaluate a cost-effective and practicable intervention to reduce dust exposures. : Personal inhalable dust (n = 201) was measured in 99 workers from 10 joineries and 3 furniture-making factories. To assess exposure determinants, full-shift video exposure monitoring (VEM) was conducted in 19 workers and task-based VEM in 32 workers (in 7 joineries and 3 furniture factories). We assessed the efficacy of vacuum extraction on hand tools and the use of vacuum cleaners instead of sweeping and dry wiping under laboratory conditions. These measures were subsequently implemented in three joinery workshops with 'high' (&gt;4 mg m-3) and one with 'low' (&lt;2 mg m-3) baseline exposures. We also included two control workshops (one 'low' and one 'high' exposure workshop) in which no interventions were implemented. Exposures were measured 4 months prior and 4 months following the intervention. : Average (geometric means) exposures in joinery and furniture making were 2.5 mg m-3 [geometric standard deviations (GSD) 2.5] and 0.6 mg m-3 (GSD 2.3), respectively. In joinery workers cleaning was associated with a 3.0-fold higher (P &lt; 0.001) dust concentration compared to low exposure tasks (e.g. gluing), while the use of hand tools showed 3.0- to 11.0-fold higher (P &lt; 0.001) exposures. In furniture makers, we found a 5.4-fold higher exposure (P &lt; 0.001) with using a table/circular saw. Laboratory efficiency experiments showed a 10-fold decrease in exposure (P &lt; 0.001) when using a vacuum cleaner. Vacuum extraction on hand tools combined with a downdraft table reduced exposures by 42.5% for routing (P &lt; 0.1) and 85.5% for orbital sanding (P &lt; 0.001). Following intervention measures in joineries, a borderline statistically significant (P &lt; 0.10) reduction in exposure of 30% was found in workshops with 'high' baseline exposures, but no reduction was shown in the workshop with 'low' baseline exposures. : Wood dust exposure is high in joinery workers and (to a lesser extent) furniture makers with frequent use of hand tools and cleaning being key drivers of exposure. Vacuum extraction on hand tools and alternative cleaning methods reduced workplace exposures substantially, but may be insufficient to achieve compliance with current occupational exposure limits.<br/

Risk of urinary bladder cancer: a case-control analysis of industry and occupation

<p>Abstract</p> <p>Background</p> <p>Uncertainty remains about urinary bladder cancer (UBC) risk for many occupations. Here, we investigate the association between occupation, industry and UBC.</p> <p>Methods</p> <p>Lifetime occupational history was collected by in-person interview for 604 newly diagnosed UBC patients and 604 cancer-free controls. Each job title was assigned a two-digit industry code and a three-digit occupation code. Odds ratios (ORs) for UBC associated with ever being employed in an industry or occupation were calculated by unconditional logistic regression adjusting for age, gender and smoking status. We also examined UBC risk by duration of employment (>0 to <10, ≥10 years) in industry or occupation.</p> <p>Results</p> <p>Significantly increased risk of UBC was observed among waiters and bartenders (OR 2.87; 95% CI 1.05 to 7.72) and occupations related to medicine and health (OR 2.17; 95% CI 1.21 to 3.92), agricultural production, livestock and animal specialties (OR 1.90; 95% CI 1.03 to 3.49), electrical assembly, installation and repair (OR 1.69; 95% CI 1.07 to 2.65), communications (OR 1.74; 95% CI 1.00 to 3.01), and health services (OR 1.58; 95% CI 1.02 to 2.44). For these occupations we also observed a significant excess risk of UBC for long-term work (i.e. ≥10 years), with the exception of waiters and bartenders. Employment for 10 years or more was associated with increased risk of UBC in general farmers (OR 9.58; 95% CI 2.18 to 42.05), agricultural production of crops (OR 3.36; 95% CI 1.10 to 10.27), occupations related to bench working (OR 4.76; 95% CI 1.74 to 13.01), agricultural, fishery, forestry & related (OR 4.58; 95% CI 1.97 to 10.65), transportation equipment (OR 2.68; 95% CI 1.03 to 6.97), and structural work (OR 1.85; 95% CI 1.16 to 2.95).</p> <p>Conclusions</p> <p>This study provides evidence of increased risk of UBC for occupations that were previously reported as at-risk. Workers in several occupation and industry groups have a significantly higher risk of UBC, particularly when duration of employment is 10 years or more.</p

Occupational exposures to pesticides and other chemicals: a New Zealand motor neuron disease case-control study.

OBJECTIVES: To assess associations between occupational exposures to pesticides and other chemicals and motor neuron disease (MND). METHODS: A population-based case-control study that included 319 MND cases (64% male/36% female) recruited through the New Zealand MND Association complemented with hospital discharge data, and 604 controls identified from the Electoral Roll. For each job held, a questionnaire collected information on 11 exposure categories (dust, fibres, tobacco smoke, fumes, gas, fumigants, oils/solvents, acids/alkalis, pesticides, other chemicals and animals/animal products). ORs were estimated using logistic regression adjusting for age, sex, ethnicity, socioeconomic status, education, smoking, alcohol consumption, physical activities, head/spine injury and other occupational exposures. RESULTS: Two exposure categories were associated with increased MND risks: pesticides (OR 1.70, 95% CI 1.17 to 2.48) and fumigants (OR 3.98, 95% CI 1.81 to 8.76), with risks increasing with longer exposure duration (p<0.01). Associations were also observed for: methyl bromide (OR 5.28, 95% CI 1.63 to 17.15), organochlorine insecticides (OR 3.28, 95% CI 1.18 to 9.07), organophosphate insecticides (OR 3.11, 95% CI 1.40 to 6.94), pyrethroid insecticides (OR 6.38, 95% CI 1.13 to 35.96), inorganic (copper) fungicides (OR 4.66, 95% CI 1.53 to 14.19), petrol/diesel fuel (OR 2.24, 95% CI 1.27 to 3.93) and unspecified solvents (OR 1.91, 95% CI 1.22 to 2.99). In women, exposure to textile fibres (OR 2.49, 95% CI 1.13 to 5.50), disinfectants (OR 9.66, 95% CI 1.29 to 72.44) and cleaning products (OR 3.53, 95% CI 1.64 to 7.59) were also associated with MND; this was not observed in men (OR 0.80, 95% CI 0.44 to 1.48; OR 0.72, 95% CI 0.29 to 1.84; OR 0.57, 95% CI 0.21 to 1.56, respectively). CONCLUSIONS: This study adds to the evidence that pesticides, especially insecticides, fungicides, and fumigants, are risk factors for MND

Occupation and motor neuron disease: a New Zealand case-control study.

OBJECTIVES: To assess associations between occupation and motor neuron disease (MND). METHODS: We conducted a population-based case-control study with cases (n=321) recruited through the New Zealand Motor Neurone Disease Association and hospital discharge data. Controls (n=605) were recruited from the Electoral Roll. Information on personal and demographic details, lifestyle factors and a full occupational history was collected using questionnaires and interviews. Associations with ever/never employed and employment duration were estimated using logistic regression stratified by sex and adjusted for age, ethnicity, socioeconomic deprivation, education and smoking. RESULTS: Elevated risks were observed for field crop and vegetable growers (OR 2.93, 95% CI 1.10 to 7.77); fruit growers (OR 2.03, 95% CI 1.09 to 3.78); gardeners and nursery growers (OR 1.96, 95% CI 1.01 to 3.82); crop and livestock producers (OR 3.61, 95% CI 1.44 to 9.02); fishery workers, hunters and trappers (OR 5.62, 95% CI 1.27 to 24.97); builders (OR 2.90, 95% CI 1.41 to 5.96); electricians (OR 3.61, 95% CI 1.34 to 9.74); caregivers (OR 2.65, 95% CI 1.04 to 6.79); forecourt attendants (OR 8.31, 95% CI 1.79 to 38.54); plant and machine operators and assemblers (OR 1.42, 95% CI 1.01 to 2.01); telecommunications technicians (OR 4.2, 95% CI 1.20 to 14.64); and draughting technicians (OR 3.02, 95% CI 1.07 to 8.53). Industries with increased risks were agriculture (particularly horticulture and fruit growing), construction, non-residential care services, motor vehicle retailing, and sport and recreation. Positive associations between employment duration and MND were shown for the occupations fruit growers, gardeners and nursery growers, and crop and livestock producers, and for the horticulture and fruit growing industry. CONCLUSIONS: This study suggests associations between MND and occupations in agriculture and several other occupations

Wet Adhesion and Adhesive Locomotion of Snails on Anti-Adhesive Non-Wetting Surfaces

Creating surfaces capable of resisting liquid-mediated adhesion is extremely difficult due to the strong capillary forces that exist between surfaces. Land snails use this to adhere to and traverse across almost any type of solid surface of any orientation (horizontal, vertical or inverted), texture (smooth, rough or granular) or wetting property (hydrophilic or hydrophobic) via a layer of mucus. However, the wetting properties that enable snails to generate strong temporary attachment and the effectiveness of this adhesive locomotion on modern super-slippy superhydrophobic surfaces are unclear. Here we report that snail adhesion overcomes a wide range of these microscale and nanoscale topographically structured non-stick surfaces. For the one surface which we found to be snail resistant, we show that the effect is correlated with the wetting response of the surface to a weak surfactant. Our results elucidate some critical wetting factors for the design of anti-adhesive and bio-adhesion resistant surfaces