Towards Energy-Efficient and Reliable Computing: From Highly-Scaled CMOS Devices to Resistive Memories

The continuous increase in transistor density based on Moore\u27s Law has led us to highly scaled Complementary Metal-Oxide Semiconductor (CMOS) technologies. These transistor-based process technologies offer improved density as well as a reduction in nominal supply voltage. An analysis regarding different aspects of 45nm and 15nm technologies, such as power consumption and cell area to compare these two technologies is proposed on an IEEE 754 Single Precision Floating-Point Unit implementation. Based on the results, using the 15nm technology offers 4-times less energy and 3-fold smaller footprint. New challenges also arise, such as relative proportion of leakage power in standby mode that can be addressed by post-CMOS technologies. Spin-Transfer Torque Random Access Memory (STT-MRAM) has been explored as a post-CMOS technology for embedded and data storage applications seeking non-volatility, near-zero standby energy, and high density. Towards attaining these objectives for practical implementations, various techniques to mitigate the specific reliability challenges associated with STT-MRAM elements are surveyed, classified, and assessed herein. Cost and suitability metrics assessed include the area of nanomagmetic and CMOS components per bit, access time and complexity, Sense Margin (SM), and energy or power consumption costs versus resiliency benefits. In an attempt to further improve the Process Variation (PV) immunity of the Sense Amplifiers (SAs), a new SA has been introduced called Adaptive Sense Amplifier (ASA). ASA can benefit from low Bit Error Rate (BER) and low Energy Delay Product (EDP) by combining the properties of two of the commonly used SAs, Pre-Charge Sense Amplifier (PCSA) and Separated Pre-Charge Sense Amplifier (SPCSA). ASA can operate in either PCSA or SPCSA mode based on the requirements of the circuit such as energy efficiency or reliability. Then, ASA is utilized to propose a novel approach to actually leverage the PV in Non-Volatile Memory (NVM) arrays using Self-Organized Sub-bank (SOS) design. SOS engages the preferred SA alternative based on the intrinsic as-built behavior of the resistive sensing timing margin to reduce the latency and power consumption while maintaining acceptable access time

Impact of Magnetic Coupling and Density on STT-MRAM Performance

As a unique mechanism for MRAMs, magnetic coupling needs to be accounted for when designing memory arrays. This paper models both intra- and inter-cell magnetic coupling analytically for STT-MRAMs and investigates their impact on the write performance and retention of MTJ devices, which are the data-storing elements of STT-MRAMs. We present magnetic measurement data of MTJ devices with diameters ranging from 35nm to 175nm, which we use to calibrate our intra-cell magnetic coupling model. Subsequently, we extrapolate this model to study inter-cell magnetic coupling in memory arrays. We propose the inter-cell magnetic coupling factor Psi to indicate coupling strength. Our simulation results show that Psi=2% maximizes the array density under the constraint that the magnetic coupling has negligible impact on the device's performance. Higher array densities show significant variations in average switching time, especially at low switching voltages, caused by inter-cell magnetic coupling, and dependent on the data pattern in the cell's neighborhood. We also observe a marginal degradation of the data retention time under the influence of inter-cell magnetic coupling

Reverse Connection of MTJ Device in STT-RAM Cell

STT-RAM technology is an emerging memory technology which is a future replacement for conventional memory technologies. STT-RAM promises fast read-write-access speeds, low power consumption, high density, non-volatility and very long life time. As with any emerging technology, however, STT-RAM has its own set of characteristic disadvantages which must first be overcome before it can be considered a viable replacement for existing solutions, an example of such being its asymmetric behavior during write operations. Currently, reverse connection of the MTJ device in STT-RAM cells is being proposed as a novel solution for compensating for this asymmetric write operation. In this work, two different MTJ devices are examined to determine which one is better suited for use with conventional connection method and which is more convenient to use with the proposed reverse connection method. Thereafter, the results of the study are applied to determine what properties of an MTJ device most heavily influence whether it is best utilized with a reverse connection versus a conventional connection

DESTINY: A Comprehensive Tool with 3D and Multi-Level Cell Memory Modeling Capability

To enable the design of large capacity memory structures, novel memory technologies such as non-volatile memory (NVM) and novel fabrication approaches, e.g., 3D stacking and multi-level cell (MLC) design have been explored. The existing modeling tools, however, cover only a few memory technologies, technology nodes and fabrication approaches. We present DESTINY, a tool for modeling 2D/3D memories designed using SRAM, resistive RAM (ReRAM), spin transfer torque RAM (STT-RAM), phase change RAM (PCM) and embedded DRAM (eDRAM) and 2D memories designed using spin orbit torque RAM (SOT-RAM), domain wall memory (DWM) and Flash memory. In addition to single-level cell (SLC) designs for all of these memories, DESTINY also supports modeling MLC designs for NVMs. We have extensively validated DESTINY against commercial and research prototypes of these memories. DESTINY is very useful for performing design-space exploration across several dimensions, such as optimizing for a target (e.g., latency, area or energy-delay product) for a given memory technology, choosing the suitable memory technology or fabrication method (i.e., 2D v/s 3D) for a given optimization target, etc. We believe that DESTINY will boost studies of next-generation memory architectures used in systems ranging from mobile devices to extreme-scale supercomputers. The latest source-code of DESTINY is available from the following git repository: https://bitbucket.org/sparsh_mittal/destiny_v2