Design of a multiple bloom filter for distributed navigation routing

Unmanned navigation of vehicles and mobile robots can be greatly simplified by providing environmental intelligence with dispersed wireless sensors. The wireless sensors can work as active landmarks for vehicle localization and routing. However, wireless sensors are often resource scarce and require a resource-saving design. In this paper, a multiple Bloom-filter scheme is proposed to compress a global routing table for a wireless sensor. It is used as a lookup table for routing a vehicle to any destination but requires significantly less memory space and search effort. An error-expectation-based design for a multiple Bloom filter is proposed as an improvement to the conventional false-positive-rate-based design. The new design is shown to provide an equal relative error expectation for all branched paths, which ensures a better network load balance and uses less memory space. The scheme is implemented in a project for wheelchair navigation using wireless camera motes. © 2013 IEEE

On-Body Channel Measurement Using Wireless Sensors

© 2012 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.This post-acceptance version of the paper is essentially complete, but may differ from the official copy of record, which can be found at the following web location (subscription required to access full paper): http://dx.doi.org/10.1109/TAP.2012.219693

Wireless sensors networks

After studying in depth look at wireless sensor networks are quite clear improvement compared to traditional wireless networks due to several factors as are the durability of the lifetime of the batteries, allowing greater portability of sensor nodes and that can record more events to power stay longer in some places, the routing protocols networks sensors allow gain than in durability also gain in efficiency the avoidance of collisions between packets, which also ensures a lower number of unnecessary network traffic. Because of the great features of such networks are currently using sensor networks in many projects related to different fields such as: environment, health, military, construction and structures, automotive, home automation, agriculture, etc. This type of network currently is leading a technological revolution similar to that had appearance of internet, because the applications appear to be infinite, also speaks global surveillance network on the planet capable of recording and tracking people specific goods and research projects have generated great interest for application in practice

Online Estimation of Battery Lifetime for Wireless Sensors Network

Battery is a major hardware component of wireless sensor networks. Most of them have no power supply and are generally deployed for a long time. Researches have been done on battery physical model and their adaptation for sensors. We present an implementation on a real sensor operating system and how architectural constraints have been assumed. Experiments have been made in order to test the impact of some parameter, as the application throughput, on the battery lifetime

Wireless sensors and IoT platform for intelligent HVAC control

Energy consumption of buildings (residential and non-residential) represents approximately 40% of total world electricity consumption, with half of this energy consumed by HVAC systems. Model-Based Predictive Control (MBPC) is perhaps the technique most often proposed for HVAC control, since it offers an enormous potential for energy savings. Despite the large number of papers on this topic during the last few years, there are only a few reported applications of the use of MBPC for existing buildings, under normal occupancy conditions and, to the best of our knowledge, no commercial solution yet. A marketable solution has been recently presented by the authors, coined the IMBPC HVAC system. This paper describes the design, prototyping and validation of two components of this integrated system, the Self-Powered Wireless Sensors and the IOT platform developed. Results for the use of IMBPC in a real building under normal occupation demonstrate savings in the electricity bill while maintaining thermal comfort during the whole occupation schedule.QREN SIDT [38798]; Portuguese Foundation for Science & Technology, through IDMEC, under LAETA [ID/EMS/50022/2013

Energy harvesting from earthquake for vibration-powered wireless sensors

Wireless sensor networks can facilitate the acquisition of useful data for the assessment and retrofitting of existing structures and infrastructures. In this perspective, recent studies have presented numerical and experimental results about self-powered wireless nodes for structural monitoring applications in the event of earthquake, wherein the energy is scavenged from seismic accelerations. A general computational approach for the analysis and design of energy harvesters under seismic loading, however, has not yet been presented. Therefore, this paper proposes a rational method that relies on the random vibrations theory for the electromechanical analysis of piezoelectric energy harvesters under seismic ground motion. In doing so, the ground acceleration is simulated by means of the Clough-Penzien filter. The considered piezoelectric harvester is a cantilever bimorph modeled as Euler-Bernoulli beam with concentrated mass at the free-end, and its global behavior is approximated by the dynamic response of the fundamental vibration mode only (which is tuned with the dominant frequency of the site soil). Once the Lyapunov equation of the coupled electromechanical problem has been formulated, mean and standard deviation of the generated electric energy are calculated. Numerical results for a cantilever bimorph which piezoelectric layers made of electrospun PVDF nanofibers are discussed in order to understand issues and perspectives about the use of wireless sensor nodes powered by earthquakes. A smart monitoring strategy for the experimental assessment of structures in areas struck by seismic events is finally illustrated

Indoor Wireless RF Energy Transfer for Powering Wireless Sensors

For powering wireless sensors in buildings, rechargeable batteries may be used. These batteries will be recharged remotely by dedicated RF sources. Far-field RF energy transport is known to suffer from path loss and therefore the RF power available on the rectifying antenna or rectenna will be very low. As a consequence, the RF-to-DC conversion efficiency of the rectenna will also be very low. By optimizing not only the subsystems of a rectenna but also taking the propagation channel into account and using the channel information for adapting the transmit antenna radiation pattern, the RF energy transport efficiency will be improved. The rectenna optimization, channel modeling and design of a transmit antenna are discussed