The use of multiple antenna techniques for uwb wireless personal area networks (UWB-MIMO WPANS)

The research activities over the three years were presented in this thesis. The work centred on the use of multiple spatial elements for Ultra wide band wireless system in order to increase the throughput, and for wireless range requirement applications, increases the coverage area. The challenges and problems of this type of implementation are identified and analysed when considered at the physical layer. The study presents a model design that integrates the multiple antenna configurations on the short range wireless communication systems. As the demand for capacity increases in Wireless Personal Area Networks (WPAN); to address this issue, the framework of the Wi-Media Ultra Wide Band (UWB) standard has been implemented in many WPAN systems. However, challenging issues still remain in terms of increasing throughput, as well as extending cellular coverage range. Multiple Input Multiple Output (MIMO) technology is a well-established antenna technology that can increase system capacity and extend the link coverage area for wireless communication systems. The work started by carrying out an investigation into integrated MIMO technology for WPANs based on the Wi-Media framework using Multi-band Orthogonal Frequency Division Multiplexing (MB-OFDM). It considered an extensive review of applicable research, the potential problems posed by some approaches and some novel approaches to resolve these issues. The proposed ECMA-368 standard was considered, and a UWB system with a multiple antenna configuration was undertaken as a basis for the analysis. A novel scheme incorporating Dual Circular 32 - QAM was proposed for MB-OFDM based systems in order to enhance overall throughput, and could be modified to increase the coverage area at compromise of the data rate. The scheme was incorporated into a spatial multiplexing model with measured computational complexity and practical design issues. This way the capacity could be increased to twice the theoretical levels, which could pay the way to high speed multi-media wireless indoor communication between devices. Furthermore, the range of the indoor wireless network could be increased in practical wireless sensor networks. The inherent presence of spatial and frequency diversity that is associated with this multiple radiators configuration enlarge the signal space, by introducing additional degrees of freedom that provide a linear increase in the system capacity, for the same available spectrum. By incorporating the spatial elements with a Dual Circular modulation that is specified within the standard, it can be shown that a substantial gain in spectral efficiency could be possible. A performance analysis of this system and the use of spatial multiplexing for potential data rates above Gigabit per second transmission were considered. In this work, a model design was constructed that increases the throughput of indoor wireless network systems with the use of dual radiating elements at the both transmitter and receiver. A simulation model had been developed that encapsulate the proposed design. Tests were carried out which investigate the performance characteristics of various spatial and modulation proposals and identifies the challenges surrounding their deployments. Results analysis based on various simulation tests including the IEEE802.15.3a UWB channel model had shown a lower error rate performance in the implementation of the model. The proposed model can be integrated in commercial indoor wireless networks and devices with relatively low implementation cost. Further, the design used in future work to address the current challenges in this field and provides a framework for future systems development

Oblique Sounding and HF Communication Techniques for Very Long Haul Ionospheric Links

El sistema de comunicació ràdio d’alta freqüència (HF, en anglès) és usat arreu del món per agències governamentals i no governamentals sempre que calgui una alternativa a les comunicacions via satèl•lit: vaixells a alta mar, avions fora de cobertura de xarxes ràdio amb visió directa, operacions militars, zones on la infraestructura ha estat destruïda per algun tipus de desastre o bé zones llunyanes sense cap altre tipus de comunicació. La ràdio HF representa una alternativa, o un sistema de backup al satèl•lit per a comunicacions de llarg abast i en redueix els costos, evita la vulnerabilitat i els problemes de sobirania. En aquesta tesi s’ha estudiat l’enllaç HF entre la base antàrtica espanyola Juan Carlos I, situada a l’illa Livingston a l’arxipèlag de les Shetland del Sud, i Espanya. L’objectiu d’aquest treball és estudiar els problemes que afecten la propagació; és a dir, la relació senyal a soroll i interferència, la dispersió multicamí i la dispersió per efecte Doppler, i dissenyar la capa física d’un enllaç HF de baixa velocitat, poca potència i llarg abast. Pel que fa aquest últim punt es fan un parell de propostes: espectre eixamplat per seqüència directa (DSSS, en anglès) i multiplexació per divisió en freqüència ortogonal (OFDM, en anglès). El repte que es planteja és el de la definició de les característiques dels símbols que millor encaixen en aquest canal per tal d’obtenir un benefici de la diversitat temporal i freqüencial que ofereix el canal. Des de l’any 2003 diverses campanyes han permès estudiar aquest canal HF, però no va ser fins la campanya 2009/2010 que s’obtingué un foto de les característiques, diürnes i nocturnes, de la ionosfera. En els articles que es presenten en aquesta tesi hem estès el rang freqüencial d’estudi respecte a investigacions prèvies i hem mostrat diferències de comportament entre el dia i la nit. Hem usat els resultats de la caracterització del canal per a dissenyar i comparar la bondat dels símbols DSSS i OFDM. Ambdues possibilitats han resultat ser candidates a implementar l’enllaç HF entre l’Antàrtida i Espanya. Tot i així, ambdues tècniques representen visions diferents de la implementació del mòdem: mentre que DSSS obté bons resultats a baixa velocitat en entorns amb baixa relació senyal a soroll, OFDM aconsegueix tasses de velocitat més elevades en canals més benignes.Los sistemas de radio de alta frecuencia (HF, en inglés) son usados por agencias gubernamentales y no gubernamentales en todo el mundo siempre que se necesite una alternativa a las comunicaciones por satélite: barcos en alta mar, aviones fuera del rango de cobertura de las redes radio de visión directa, operaciones militares, zonas donde la infraestructura ha sido destruida por algún desastre. Ésta ofrece una alternativa, o representa un sistema de backup, a las comunicaciones vía satélite, evitando los costes, la vulnerabilidad y los problemas de soberanía de las comunicaciones por satélite. En esta tesis se ha estudiado el enlace HF entre la base antártica española Juan Carlos I en la isla Livingston, en las Shetland del sur y España. El objetivo de este trabajo es el estudio de las limitaciones de la propagación ionosférica (como la relación señal a ruido e interferencia, la dispersión multicamino y la dispersión por efecto Doppler) y el diseño de la capa física de un enlace HF de baja velocidad, baja potencia y largo alcance. Se han estudiado un par de propuestas para este enlace, como son el espectro ensanchado por secuencia directa (DSSS, en inglés) y la multiplexación por división en frecuencia ortogonal (OFDM, en inglés). El reto ha sido definir las características que mejor se adecuan a este enlace para poder aprovechar la diversidad temporal y frecuencial que ofrece el canal HF. Desde el año 2003 diversas campañas de sondeo han permitido estudiar el canal HF pero no es hasta la campaña 2009/2010 que se consigue una fotografía de la actividad ionosférica tanto nocturna como diurna. En los artículos que se presentan en esta tesis hemos extendido los estudios previos a todo el rango de frecuencias HF y hemos mostrado las diferencias entre el día y la noche. Hemos usado estos resultados de caracterización del canal para diseñar y comparar símbolos DSSS y símbolos OFDM. Ambas posibilidades han resultado ser posibles candidatas para implementar un enlace HF de baja velocidad entre la Antártida y España. Sin embargo ambas técnicas representan dos aproximaciones distintas a la implementación del módem. Mientras que DSSS consigue un buen funcionamiento a baja velocidad en escenarios con baja relación señal a ruido, OFDM consigue tasas de transmisión más altas en escenarios más benignos.High Frequency (HF) radio is used by governmental and non nongovernmental agencies worldwide whenever an alternative to satellites for sky wave communication is needed: ships at sea, aircraft out of range of line-of-sight radio networks, military operations, disaster areas with communication infrastructure destroyed or distant regions lacking other communications. It offers an alternative to satellites, or a backup, for long-haul communications, thus avoiding the costs, vulnerabilities and sovereignty concerns of satellite communications. In this thesis the HF link between the Antarctic Spanish Station Juan Carlos I in Livingston Island, South Shetlands and Spain is studied. The aim of this study is to address the impairments that affect HF propagation (i.e., signal-to-noise plus interference ratio, multipath and Doppler shift and spread) and to design the physical layer of a low rate, low power and long-haul HF link. Some proposals regarding this last issue are addressed, i.e., direct sequence spread spectrum (DSSS) and orthogonal frequency division multiplexing (OFDM). The challenge is to define the symbol characteristics that best fit the link to benefit from time and frequency diversity that offers the HF channel. Since 2003 several transmission campaigns have allowed to study the HF channel but it is not until the 2009/2010 campaign that we have achieved a whole picture of both diurnal and nocturnal ionospheric activity. In the papers presented in this thesis we have extended the previous research to the whole range of HF frequencies and we have shown the differences on performance between day and night. We have used the results from channel characterization to design and compare the performance of DSSS and OFDM symbols. Both techniques have turned out to be possible candidates to implement a low rate HF link between Antarctica and Spain. However, both techniques stand for different approaches of the modem: DSSS achieves good performance at low data rate in low SNR scenarios, whereas OFDM achieves higher data rate in benign channel