Fixed and reconfigurable multiband antennas

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel UniversityWith the current scenario of development of antennas in the wireless communication field, the need of compact multiband, multifunctional and cost effective antenna is on the rise. The objective of this thesis is to present fixed and reconfigurable techniques and methods for small and slim multiband antennas, which are applicable to serve modern small and slime wireless, mobile and cognitive radio applications. In the fixed designs, independent control of the operating frequencies is investigated to enhance the antennas capabilities and to give the designer an additional level of freedom to design the antenna for other bands easily without altering the shape or the size of the antenna. In addition, for mobile phone antenna, the effect of user’s hand and mobile phone housing are studied to be with minimum effect. Although fixed multiband antennas can widely be used in many different systems or devices, they lack flexibility to accommodate new services compared with reconfigurable antennas. A reconfigurable antenna can be considered as one of the key advances for future wireless communication transceivers. The advantage of using a reconfigurable antenna is to operate in multiband where the total antenna volume can be reused and therefore the overall size can be reduced. Moreover, the future of cell phones and other personal mobile devices require compact multiband antennas and smart antennas with reconfigurable features. Two different types of frequency reconfigurability are investigated in this thesis: switchable and tunable. In the switchable reconfigurability, PIN diodes have been used so the antenna’s operating frequencies can hop between different services whereas varactor diode with variable capacitance allow the antenna’s operating frequencies to be fine-tuned over the operating bands. With this in mind, firstly, a switchable compact and slim antenna with two patch elements is presented for cognitive radio applications where the antenna is capable of operating in wideband and narrow bands depending on the states of the switches. In addition to this, a switchable design is proposed to switch between single, dual and tri bands applications (using a single varactor diode to act as a switch at lower capacitance values) with some fine tuning capabilities for the first and third bands when the capacitance of the diode is further increased. Secondly, the earlier designed fixed antennas are modified to be reconfigurable with fine-tuning so that they can be used for more applications in both wireless and mobile applications with the ability to control the bands simultaneously or independently over a wide range. Both analytical and numerical methods are used to implement a realistic and functional design. Parametric analyses using simulation tools are performed to study critical parameters that may affect the designs. Finally, the simulated designs are fabricated, and measured results are presented that validate the design approaches

2009 Index IEEE Antennas and Wireless Propagation Letters Vol. 8

This index covers all technical items - papers, correspondence, reviews, etc. - that appeared in this periodical during the year, and items from previous years that were commented upon or corrected in this year. Departments and other items may also be covered if they have been judged to have archival value. The Author Index contains the primary entry for each item, listed under the first author\u27s name. The primary entry includes the coauthors\u27 names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, month, and inclusive pagination. The Subject Index contains entries describing the item under all appropriate subject headings, plus the first author\u27s name, the publication abbreviation, month, and year, and inclusive pages. Note that the item title is found only under the primary entry in the Author Index

2008 Index IEEE Transactions on Control Systems Technology Vol. 16

This index covers all technical items - papers, correspondence, reviews, etc. - that appeared in this periodical during the year, and items from previous years that were commented upon or corrected in this year. Departments and other items may also be covered if they have been judged to have archival value. The Author Index contains the primary entry for each item, listed under the first author\u27s name. The primary entry includes the coauthors\u27 names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, month, and inclusive pagination. The Subject Index contains entries describing the item under all appropriate subject headings, plus the first author\u27s name, the publication abbreviation, month, and year, and inclusive pages. Note that the item title is found only under the primary entry in the Author Index

Wideband and UWB antennas for wireless applications. A comprehensive review

A comprehensive review concerning the geometry, the manufacturing technologies, the materials, and the numerical techniques, adopted for the analysis and design of wideband and ultrawideband (UWB) antennas for wireless applications, is presented. Planar, printed, dielectric, and wearable antennas, achievable on laminate (rigid and flexible), and textile dielectric substrates are taken into account. The performances of small, low-profile, and dielectric resonator antennas are illustrated paying particular attention to the application areas concerning portable devices (mobile phones, tablets, glasses, laptops, wearable computers, etc.) and radio base stations. This information provides a guidance to the selection of the different antenna geometries in terms of bandwidth, gain, field polarization, time-domain response, dimensions, and materials useful for their realization and integration in modern communication systems

U-Shaped Microstrip Patch Antenna for WLAN/WIMAX Applications

A full-duplex radio design communication systems design based on the WiMax/WLAN antenna. The design an antenna in this report presented a triple-band operation with significant impedance bandwidth for WLAN/WiMAX system. The designed antenna having the compact size of 10 x 26 mm2 and shaped of antenna is U-shaped. The overall performance of the antenna three different bands 1) band-1:- 2.40 to 2.53 GHz, 2) band-2:-3.40 o 3.60 GHz and 3) band-3:- 5.00 to 6.00 GHz, these bands cover the WiMAX (2.5, 3.5, 5.5) and WLAN (2.4, 5.2, 5.8) bands. Here HFSS simulator used to simulate and validate the results. By combining the performance of complete WLAN/WiMAX antenna with MIMO antenna, the proposed MIMO antenna with wide operating frequencies 2.4 GHz. Thus the simulation results along with the given parameter values show that the antenna can simultaneously operate over WLAN, WiMAX and MIMO frequency bands

Bandwidth Optimization of Microstrip Patch Antenna- A Basic Overview

An antenna is a very important device in wireless applications. It converts the electrical energy into RF signal at the transmitter and RF signal into electrical energy at the receiver side. A micro strip antenna consists of a rectangular patch on a ground plane separated by dielectric substrate. The patch in the antenna is made of a conducting material Cu (Copper) or Au (Gold) and this can be in any shape of rectangular, circular, triangular, elliptical or some other common shape. Researches of past few year shows that, various work on Microstrip Patch Antenna is attentive on designing compact sized Microstrip Antenna with efficiency and bandwidth optimized. But inherently Microstrip Patch Antenna have narrow bandwidth so to enhance bandwidth various techniques are engaged. Today’s Communication devices need several applications which require higher bandwidth; such as mobile phones these days are getting thinner and smarter but many applications supported by them require higher bandwidth, so microstrip antenna used for performing this operation should provide wider bandwidth as well as their shape should be more efficient and size should be compact so that it should occupy less space while keeping the size of device as small as possible. In this review paper, a review of different techniques used for bandwidth optimization & various shapes of compact and broadband microstrip patch antenna is given

Design of a printed multiband MIMO antenna

A multiband MIMO antenna using planar technology is proposed for next generation mobile communication system. The antenna consists of two symmetrical monopole elements printed in parallel to each other at the upper and lower corners of a printed-circuit board (PCB) with a size 50×110 mm2 which is similar to the side of a mobile phone. The two monopoles have two branch strips to generate two frequency bands. By using a parasitic element in each monopole, a much enhanced bandwidth in the upper band can be obtained. A lumped-impedance network is designed to enhance matching at the input ports for the two antenna elements. Computer simulation is used to study, design and optimize the antenna. Results indicate that the proposed MIMO antenna has a very bandwidth enough to cover the LTE (lower band), DCS1800, PCS1900, UMTS-2100, Wibro Band, 2.4G-WLAN, and Wimax (upper band) systems. To enhance the isolation between the two monopole elements within the desirable frequency bands, a slit is cut in the middle on the PCB ground. The MIMO antenna a very low profile and low cost which makes the design very attractive for mobile phone applications. © 2013 EurAAP.published_or_final_versio

Dual-Band Integrated Antennas for DVB-T Receivers

An overview on compact Planar Inverted-F Antennas (PIFAs) that are suitable for monitor-equipped devices is presented. In particular, high efficiency PIFAs (without any dielectric layer) with a percentage bandwidth (%BW) greater than 59% (470–862 MHz DVB-T band) are considered. In this context, two PIFA configurations are reviewed, where a dual-band feature has been obtained, in the 3300–3800 MHz (14% percentage bandwidth) WiMAX and 2400–2484 MHz (2.7% percentage bandwidth) WLAN IEEE 802.11b,g frequency bands, respectively, to also guarantee web access to on-demand services. The two PIFAs fill an overall volume of  mm3 and  mm3, respectively. They are composed of a series of branches, properly dimensioned and separated to generate the required resonances. Finally, to show the extreme flexibility of the previous two configurations, a novel dual-band L-shape PIFA has been designed. A reflection coefficient less than −6 dB and −10 dB and an antenna gain of around 2 dBi and 6.3 dBi have been obtained in the 470–862 MHz DVB-T band and the 2400–2484 MHz WLAN band, respectively. The L-shape PIFA prototype can be obtained by properly cutting and folding a single metal sheet, thus resulting in a relatively low-cost and mechanically robust antenna configuration

A Review on Different Techniques of Mutual Coupling Reduction Between Elements of Any MIMO Antenna. Part 1: DGSs and Parasitic Structures

This two-part article presents a review of different techniques of mutual coupling (MC) reduction. MC is a major issue when an array of antennas is densely packed. When the separation between the antennas i