Saving Energy in Mobile Devices for On-Demand Multimedia Streaming -- A Cross-Layer Approach

This paper proposes a novel energy-efficient multimedia delivery system called EStreamer. First, we study the relationship between buffer size at the client, burst-shaped TCP-based multimedia traffic, and energy consumption of wireless network interfaces in smartphones. Based on the study, we design and implement EStreamer for constant bit rate and rate-adaptive streaming. EStreamer can improve battery lifetime by 3x, 1.5x and 2x while streaming over Wi-Fi, 3G and 4G respectively.Comment: Accepted in ACM Transactions on Multimedia Computing, Communications and Applications (ACM TOMCCAP), November 201

Prediction-Based Energy Saving Mechanism in 3GPP NB-IoT Networks

The current expansion of the Internet of things (IoT) demands improved communication platforms that support a wide area with low energy consumption. The 3rd Generation Partnership Project introduced narrowband IoT (NB-IoT) as IoT communication solutions. NB-IoT devices should be available for over 10 years without requiring a battery replacement. Thus, a low energy consumption is essential for the successful deployment of this technology. Given that a high amount of energy is consumed for radio transmission by the power amplifier, reducing the uplink transmission time is key to ensure a long lifespan of an IoT device. In this paper, we propose a prediction-based energy saving mechanism (PBESM) that is focused on enhanced uplink transmission. The mechanism consists of two parts: first, the network architecture that predicts the uplink packet occurrence through a deep packet inspection; second, an algorithm that predicts the processing delay and pre-assigns radio resources to enhance the scheduling request procedure. In this way, our mechanism reduces the number of random accesses and the energy consumed by radio transmission. Simulation results showed that the energy consumption using the proposed PBESM is reduced by up to 34% in comparison with that in the conventional NB-IoT method

Performance Evaluation of Power Efficient Mechanisms on Multimedia over LTE-A Networks

Power optimization is a critical challenge in multimedia services over cellular communication systems. Long Term Evolution-Advanced (LTE-A) has been developed for higher bandwidth access for accommodating today’s heavy data applications to provide better performance. Idle mode permits cellularstations to manipulate power and sources with the aid of limiting its activity for discrete periods and this eliminates the lively requirement for handover and other ordinary operations. Also, provides a periodical method for the cell station for pending downlink traffic directed to the cellularstation and as a result gets rid network handover traffic from basically inactive cellular stations. Discontinuous Reception (DRX) has been carried out to decrease the power intake of the consumer device, and transmission of big quantity of data. At data transfer, mobile device and the network phases negotiation occur. During other times, the device turns its receiver off and enters a low power state. Thereby similarly assisting numerous services and big quantities of information transmissions. This study prepossession of a massive quantity of data. Also proposes the two-power optimization modes idle mode and DRX mode parameters to achieve maximum possible power saving with the higher quality of multimedia services. Furthermore, the effectiveness of using DRX short cycles and DRX long cycles on multimedia services and the overall performance. Using OPNET Simulator 17.5, it concluded that DRX mechanism is preferred to operate compared with the Idle mechanism, also resulted that the DRX long cycles are a very good choice for all multimedia services and the overall network performance

Apport de la Qualité de l’Expérience dans l’optimisation de services multimédia : application à la diffusion de la vidéo et à la VoIP

The emerging and fast growth of multimedia services have created new challenges for network service providers in order to guarantee the best user's Quality of Experience (QoE) in diverse networks with distinctive access technologies. Usually, various methods and techniques are used to predict the user satisfaction level by studying the combined impact of numerous factors. In this thesis, we consider two important multimedia services to evaluate the user perception, which are: video streaming service, and VoIP. This study investigates user's QoE that follows three directions: (1) methodologies for subjective QoE assessment of video services, (2) regulating user's QoE using video a rate adaptive algorithm, and (3) QoE-based power efficient resource allocation methods for Long Term Evaluation-Advanced (LTE-A) for VoIP. Initially, we describe two subjective methods to collect the dataset for assessing the user's QoE. The subjectively collected dataset is used to investigate the influence of different parameters (e.g. QoS, video types, user profile, etc.) on user satisfaction while using the video services. Later, we propose a client-based HTTP rate adaptive video streaming algorithm over TCP protocol to regulate the user's QoE. The proposed method considers three Quality of Service (QoS) parameters that govern the user perception, which are: Bandwidth, Buffer, and dropped Frame rate (BBF). The BBF method dynamically selects the suitable video quality according to network conditions and user's device properties. Lastly, we propose a QoE driven downlink scheduling method, i.e. QoE Power Escient Method (QEPEM) for LTE-A. It esciently allocates the radio resources, and optimizes the use of User Equipment (UE) power utilizing the Discontinuous Reception (DRX) method in LTE-AL'émergence et la croissance rapide des services multimédia dans les réseaux IP ont créé de nouveaux défis pour les fournisseurs de services réseau, qui, au-delà de la Qualité de Service (QoS) issue des paramètres techniques de leur réseau, doivent aussi garantir la meilleure qualité de perception utilisateur (Quality of Experience, QoE) dans des réseaux variés avec différentes technologies d'accès. Habituellement, différentes méthodes et techniques sont utilisées pour prédire le niveau de satisfaction de l'utilisateur, en analysant l'effet combiné de multiples facteurs. Dans cette thèse, nous nous intéressons à la commande du réseau en intégrant à la fois des aspects qualitatifs (perception du niveau de satisfaction de l'usager) et quantitatifs (mesure de paramètres réseau) dans l'objectif de développer des mécanismes capables, à la fois, de s'adapter à la variabilité des mesures collectées et d'améliorer la qualité de perception. Pour ce faire, nous avons étudié le cas de deux services multimédia populaires, qui sont : le streaming vidéo, et la voix sur IP (VoIP). Nous investiguons la QoE utilisateur de ces services selon trois aspects : (1) les méthodologies d'évaluation subjective de la QoE, dans le cadre d'un service vidéo, (2) les techniques d'adaptation de flux vidéo pour garantir un certain niveau de QoE, et (3) les méthodes d'allocation de ressource, tenant compte de la QoE tout en économisant l'énergie, dans le cadre d'un service de VoIP (LTE-A). Nous présentons d'abord deux méthodes pour récolter des jeux de données relatifs à la QoE. Nous utilisons ensuite ces jeux de données (issus des campagnes d'évaluation subjective que nous avons menées) pour comprendre l'influence de différents paramètres (réseau, terminal, profil utilisateur) sur la perception d'un utilisateur d'un service vidéo. Nous proposons ensuite un algorithme de streaming vidéo adaptatif, implémenté dans un client HTTP, et dont le but est d'assurer un certain niveau de QoE et le comparons à l'état de l'art. Notre algorithme tient compte de trois paramètres de QoS (bande passante, taille de mémoires tampons de réception et taux de pertes de paquets) et sélectionne dynamiquement la qualité vidéo appropriée en fonction des conditions du réseau et des propriétés du terminal de l'utilisateur. Enfin, nous proposons QEPEM (QoE Power Efficient Method), un algorithme d'ordonnancement basé sur la QoE, dans le cadre d'un réseau sans fil LTE, en nous intéressant à une allocation dynamique des ressources radio en tenant compte de la consommation énergétiqu

Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks

Soaring capacity and coverage demands dictate that future cellular networks need to soon migrate towards ultra-dense networks. However, network densification comes with a host of challenges that include compromised energy efficiency, complex interference management, cumbersome mobility management, burdensome signaling overheads and higher backhaul costs. Interestingly, most of the problems, that beleaguer network densification, stem from legacy networks' one common feature i.e., tight coupling between the control and data planes regardless of their degree of heterogeneity and cell density. Consequently, in wake of 5G, control and data planes separation architecture (SARC) has recently been conceived as a promising paradigm that has potential to address most of aforementioned challenges. In this article, we review various proposals that have been presented in literature so far to enable SARC. More specifically, we analyze how and to what degree various SARC proposals address the four main challenges in network densification namely: energy efficiency, system level capacity maximization, interference management and mobility management. We then focus on two salient features of future cellular networks that have not yet been adapted in legacy networks at wide scale and thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and device-to-device (D2D) communications. After providing necessary background on CoMP and D2D, we analyze how SARC can particularly act as a major enabler for CoMP and D2D in context of 5G. This article thus serves as both a tutorial as well as an up to date survey on SARC, CoMP and D2D. Most importantly, the article provides an extensive outlook of challenges and opportunities that lie at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201

System optimisation and radio planning for future LTE-advanced

This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonThis work is related to wireless communication. In this Thesis three main issues are addressed for future cellular networks: power consumption, interference and mobility. These issues continue to be a burden on the system’s performance as long as technology keeps evolving. In the presented chapters, the focus was to introduce greater intelligence to the LTE system algorithms and bring to them a dynamic and self-organizing approach. The first approach concerns power consumption in wireless terminals. The currently applied solution to save energy is the DRX mechanism. It organizes the time when the terminal wakes up and starts receiving data, and when it goes into sleep mode in order to save its battery power. The current DRX is described as static or fixed which makes its parameters unsuitable for the nature of the bursty traffic. In this work an adaptive DRX mechanism is proposed and evaluated as the wireless terminal battery saving algorithm. The second approach is co-channel interference mitigation. To increase the system’s capacity and avoid spectrum scarcity, small cells such as Femtocells are deployed and operate on the same frequency bands as the Macrocell. Although these small nodes increase the system capacity, however, the challenges will be in the femtocells planning and management in addition to the interference issues. Here a dynamic interference cancellation approach is presented to enable the Femtocell to track the allocated resources to the Macro-users, and to avoid using them. The third approach concerns mobility management in heterogeneous networks. The wireless terminal may have different mobility levels during handover which increases the handover failures due to failure in handover commands and aging of the reported parameters. This issue is presented in detail with the aim to avoid performance degradation and improve the reporting mechanisms during fast mobility levels. For this regard the presented method proposes more cooperation between the serving cell and the end-user so that the large amount of overhead and measurement are reduced. Simulations with different configurations are conducted to present the results of the proposed models. Results show that the proposed models bring improvements to the LTE system. The enhanced self-organized architecture in the three presented approaches performs well in terms of power saving, dynamic spectrum utilization by Femtocells, and mitigation of sudden throughput degradation due to the serving cell’s downlink signal outage during mobility.Brunel University Londo