Smart environment monitoring through micro unmanned aerial vehicles

In recent years, the improvements of small-scale Unmanned Aerial Vehicles (UAVs) in terms of flight time, automatic control, and remote transmission are promoting the development of a wide range of practical applications. In aerial video surveillance, the monitoring of broad areas still has many challenges due to the achievement of different tasks in real-time, including mosaicking, change detection, and object detection. In this thesis work, a small-scale UAV based vision system to maintain regular surveillance over target areas is proposed. The system works in two modes. The first mode allows to monitor an area of interest by performing several flights. During the first flight, it creates an incremental geo-referenced mosaic of an area of interest and classifies all the known elements (e.g., persons) found on the ground by an improved Faster R-CNN architecture previously trained. In subsequent reconnaissance flights, the system searches for any changes (e.g., disappearance of persons) that may occur in the mosaic by a histogram equalization and RGB-Local Binary Pattern (RGB-LBP) based algorithm. If present, the mosaic is updated. The second mode, allows to perform a real-time classification by using, again, our improved Faster R-CNN model, useful for time-critical operations. Thanks to different design features, the system works in real-time and performs mosaicking and change detection tasks at low-altitude, thus allowing the classification even of small objects. The proposed system was tested by using the whole set of challenging video sequences contained in the UAV Mosaicking and Change Detection (UMCD) dataset and other public datasets. The evaluation of the system by well-known performance metrics has shown remarkable results in terms of mosaic creation and updating, as well as in terms of change detection and object detection

Enhancement of Underwater Video Mosaics for Post-Processing

Mosaics of seafloor created from still images or video acquired underwater have proved to be useful for construction of maps of forensic and archeological sites, species\u27 abundance estimates, habitat characterization, etc. Images taken by a camera mounted on a stable platform are registered (at first pair-wise and then globally) and assembled in a high resolution visual map of the surveyed area. While this map is usually sufficient for a human orientation and even quantitative measurements, it often contains artifacts that complicate an automatic post-processing (for example, extraction of shapes for organism counting, or segmentation for habitat characterization). The most prominent artifacts are inter-frame seams caused by inhomogeneous artificial illumination, and local feature misalignments due to parallax effects - result of an attempt to represent a 3D world on a 2D map. In this paper we propose two image processing techniques for mosaic quality enhancement - median mosaic-based illumination correction suppressing appearance of inter-frame seams, and micro warping decreasing influence of parallax effects

Mosaics from arbitrary stereo video sequences

lthough mosaics are well established as a compact and non-redundant representation of image sequences, their application still suffers from restrictions of the camera motion or has to deal with parallax errors. We present an approach that allows construction of mosaics from arbitrary motion of a head-mounted camera pair. As there are no parallax errors when creating mosaics from planar objects, our approach first decomposes the scene into planar sub-scenes from stereo vision and creates a mosaic for each plane individually. The power of the presented mosaicing technique is evaluated in an office scenario, including the analysis of the parallax error

Retrieval and Registration of Long-Range Overlapping Frames for Scalable Mosaicking of In Vivo Fetoscopy

Purpose: The standard clinical treatment of Twin-to-Twin Transfusion Syndrome consists in the photo-coagulation of undesired anastomoses located on the placenta which are responsible to a blood transfer between the two twins. While being the standard of care procedure, fetoscopy suffers from a limited field-of-view of the placenta resulting in missed anastomoses. To facilitate the task of the clinician, building a global map of the placenta providing a larger overview of the vascular network is highly desired. Methods: To overcome the challenging visual conditions inherent to in vivo sequences (low contrast, obstructions or presence of artifacts, among others), we propose the following contributions: (i) robust pairwise registration is achieved by aligning the orientation of the image gradients, and (ii) difficulties regarding long-range consistency (e.g. due to the presence of outliers) is tackled via a bag-of-word strategy, which identifies overlapping frames of the sequence to be registered regardless of their respective location in time. Results: In addition to visual difficulties, in vivo sequences are characterised by the intrinsic absence of gold standard. We present mosaics motivating qualitatively our methodological choices and demonstrating their promising aspect. We also demonstrate semi-quantitatively, via visual inspection of registration results, the efficacy of our registration approach in comparison to two standard baselines. Conclusion: This paper proposes the first approach for the construction of mosaics of placenta in in vivo fetoscopy sequences. Robustness to visual challenges during registration and long-range temporal consistency are proposed, offering first positive results on in vivo data for which standard mosaicking techniques are not applicable.Comment: Accepted for publication in International Journal of Computer Assisted Radiology and Surgery (IJCARS

Under vehicle perception for high level safety measures using a catadioptric camera system

In recent years, under vehicle surveillance and the classification of the vehicles become an indispensable task that must be achieved for security measures in certain areas such as shopping centers, government buildings, army camps etc. The main challenge to achieve this task is to monitor the under frames of the means of transportations. In this paper, we present a novel solution to achieve this aim. Our solution consists of three main parts: monitoring, detection and classification. In the first part we design a new catadioptric camera system in which the perspective camera points downwards to the catadioptric mirror mounted to the body of a mobile robot. Thanks to the catadioptric mirror the scenes against the camera optical axis direction can be viewed. In the second part we use speeded up robust features (SURF) in an object recognition algorithm. Fast appearance based mapping algorithm (FAB-MAP) is exploited for the classification of the means of transportations in the third part. Proposed technique is implemented in a laboratory environment

Multiperspective mosaics and layered representation for scene visualization

This thesis documents the efforts made to implement multiperspective mosaicking for the purpose of mosaicking undervehicle and roadside sequences. For the undervehicle sequences, it is desired to create a large, high-resolution mosaic that may used to quickly inspect the entire scene shot by a camera making a single pass underneath the vehicle. Several constraints are placed on the video data, in order to facilitate the assumption that the entire scene in the sequence exists on a single plane. Therefore, a single mosaic is used to represent a single video sequence. Phase correlation is used to perform motion analysis in this case. For roadside video sequences, it is assumed that the scene is composed of several planar layers, as opposed to a single plane. Layer extraction techniques are implemented in order to perform this decomposition. Instead of using phase correlation to perform motion analysis, the Lucas-Kanade motion tracking algorithm is used in order to create dense motion maps. Using these motion maps, spatial support for each layer is determined based on a pre-initialized layer model. By separating the pixels in the scene into motion-specific layers, it is possible to sample each element in the scene correctly while performing multiperspective mosaicking. It is also possible to fill in many gaps in the mosaics caused by occlusions, hence creating more complete representations of the objects of interest. The results are several mosaics with each mosaic representing a single planar layer of the scene

Virtual viewpoint three-dimensional panorama

Conventional panoramic images are known to provide for an enhanced field of view in which the scene always has a fixed appearance. The idea presented in this paper focuses on the use of the concept of virtual viewpoint creation to generate different panoramic images of the same scene with three-dimensional component. Three-dimensional effect in a resultant panorama is realized by superimposing a stereo-pair of panoramic images

Automated 3D object modeling from aerial video imagery

Research in physically accurate 3D modeling of a scene is gaining momentum because of its far reaching applications in civilian and defense sectors. The modeled 3D scene must conform both geometrically and spectrally to the real world for all the applications. Geometric modeling of a scene can be achieved in many ways of which the two most popular methods are - a) using multiple 2D passive images of the scene also called as stereo vision and b) using 3D point clouds like Lidar (Light detection and ranging) data. In this research work, we derive the 3D models of objects in a scene using passive aerial video imagery. At present, this geometric modeling requires a lot of manual intervention due to a variety of factors like sensor noise, low contrast conditions during image capture, etc. Hence long time periods, in the order of weeks and months, are required to model even a small scene. This thesis focuses on automating the process of geometric modeling of objects in a scene from passive aerial video imagery. The aerial video frames are stitched into stereo mosaics. These stereo mosaics not only provide the elevation information of a scene but also act as good 3D visualization tools. The 3D information obtained from the stereo mosaics is used to identify the various 3D objects, especially man-made buildings using probabilistic inference provided by Bayesian Networks. The initial 3D building models are further optimized by projecting them on to the individual video frames. The limitations of the state-of-art technology in attaining these goals are presented along with the techniques to overcome them. The improvement that can be achieved in the accuracy of the 3D models when Lidar data is fused with aerial video during the object identification process is also examined