Incipient fault diagnosis of roller bearing using optimized wavelet transform based multi-speed vibration signatures

Condition monitoring and incipient fault diagnosis of rolling bearing is of great importance to detect failures and ensure reliable operations in rotating machinery. In this paper, a new multi-speed fault diagnostic approach is presented by using self-adaptive wavelet transform components generated from bearing vibration signals. The proposed approach is capable of discriminating signatures from four conditions of rolling bearing, i.e. normal bearing and three different types of defected bearings on outer race, inner race and roller separately. Particle Swarm Optimization (PSO) and Broyden-Fletcher-Goldfarb-Shanno (BFGS) based quasi-Newton minimization algorithms are applied to seek optimal parameters of Impulse Modelling based Continuous Wavelet Transform (IMCWT) model. Then, a three-dimensional feature space of the statistical parameters and a Nearest Neighbor (NN) classifier are respectively applied for fault signature extraction and fault classification. Effectiveness of this approach is then evaluated, and the results have achieved an overall accuracy of 100%. Moreover, the generated discriminatory fault signatures are suitable for multi-speed fault data sets. This technique will be further implemented and tested in a real industrial environment

Development of new fault detection methods for rotating machines (roller bearings)

Abstract Early fault diagnosis of roller bearings is extremely important for rotating machines, especially for high speed, automatic and precise machines. Many research efforts have been focused on fault diagnosis and detection of roller bearings, since they constitute one the most important elements of rotating machinery. In this study a combination method is proposed for early damage detection of roller bearing. Wavelet packet transform (WPT) is applied to the collected data for denoising and the resulting clean data are break-down into some elementary components called Intrinsic mode functions (IMFs) using Ensemble empirical mode decomposition (EEMD) method. The normalized energy of three first IMFs are used as input for Support vector machine (SVM) to recognize whether signals are sorting out from healthy or faulty bearings. Then, since there is no robust guide to determine amplitude of added noise in EEMD technique, a new Performance improved EEMD (PIEEMD) is proposed to determine the appropriate value of added noise. A novel feature extraction method is also proposed for detecting small size defect using Teager-Kaiser energy operator (TKEO). TKEO is applied to IMFs obtained to create new feature vectors as input data for one-class SVM. The results of applying the method to acceleration signals collected from an experimental bearing test rig demonstrated that the method can be successfully used for early damage detection of roller bearings. Most of the diagnostic methods that have been developed up to now can be applied for the case stationary working conditions only (constant speed and load). However, bearings often work at time-varying conditions such as wind turbine supporting bearings, mining excavator bearings, vehicles, robots and all processes with run-up and run-down transients. Damage identification for bearings working under non-stationary operating conditions, especially for early/small defects, requires the use of appropriate techniques, which are generally different from those used for the case of stationary conditions, in order to extract fault-sensitive features which are at the same time insensitive to operational condition variations. Some methods have been proposed for damage detection of bearings working under time-varying speed conditions. However, their application might increase the instrumentation cost because of providing a phase reference signal. Furthermore, some methods such as order tracking methods still can be applied when the speed variation is limited. In this study, a novel combined method based on cointegration is proposed for the development of fault features which are sensitive to the presence of defects while in the same time they are insensitive to changes in the operational conditions. It does not require any additional measurements and can identify defects even for considerable speed variations. The signals acquired during run-up condition are decomposed into IMFs using the performance improved EEMD method. Then, the cointegration method is applied to the intrinsic mode functions to extract stationary residuals. The feature vectors are created by applying the Teager-Kaiser energy operator to the obtained stationary residuals. Finally, the feature vectors of the healthy bearing signals are utilized to construct a separating hyperplane using one-class support vector machine. Eventually the proposed method was applied to vibration signals measured on an experimental bearing test rig. The results verified that the method can successfully distinguish between healthy and faulty bearings even if the shaft speed changes dramatically

Condition Monitoring Methods for Large, Low-speed Bearings

In all industrial production plants, well-functioning machines and systems are required for sustained and safe operation. However, asset performance degrades over time and may lead to reduced effiency, poor product quality, secondary damage to other assets or even complete failure and unplanned downtime of critical systems. Besides the potential safety hazards from machine failure, the economic consequences are large, particularly in offshore applications where repairs are difficult. This thesis focuses on large, low-speed rolling element bearings, concretized by the main swivel bearing of an offshore drilling machine. Surveys have shown that bearing failure in drilling machines is a major cause of rig downtime. Bearings have a finite lifetime, which can be estimated using formulas supplied by the bearing manufacturer. Premature failure may still occur as a result of irregularities in operating conditions and use, lubrication, mounting, contamination, or external environmental factors. On the contrary, a bearing may also exceed the expected lifetime. Compared to smaller bearings, historical failure data from large, low-speed machinery is rare. Due to the high cost of maintenance and repairs, the preferred maintenance arrangement is often condition based. Vibration measurements with accelerometers is the most common data acquisition technique. However, vibration based condition monitoring of large, low-speed bearings is challenging, due to non-stationary operating conditions, low kinetic energy and increased distance from fault to transducer. On the sensor side, this project has also investigated the usage of acoustic emission sensors for condition monitoring purposes. Roller end damage is identified as a failure mode of interest in tapered axial bearings. Early stage abrasive wear has been observed on bearings in drilling machines. The failure mode is currently only detectable upon visual inspection and potentially through wear debris in the bearing lubricant. In this thesis, multiple machine learning algorithms are developed and applied to handle the challenges of fault detection in large, low-speed bearings with little or no historical data and unknown fault signatures. The feasibility of transfer learning is demonstrated, as an approach to speed up implementation of automated fault detection systems when historical failure data is available. Variational autoencoders are proposed as a method for unsupervised dimensionality reduction and feature extraction, being useful for obtaining a health indicator with a statistical anomaly detection threshold. Data is collected from numerous experiments throughout the project. Most notably, a test was performed on a real offshore drilling machine with roller end wear in the bearing. To replicate this failure mode and aid development of condition monitoring methods, an axial bearing test rig has been designed and built as a part of the project. An overview of all experiments, methods and results are given in the thesis, with details covered in the appended papers.publishedVersio

Self-adaptive fault diagnosis of roller bearings using infrared thermal images

Fault diagnosis of roller bearings in rotating machinery is of great significance to identify latent abnormalities and failures in industrial plants. This paper presents a new self-adaptive fault diagnosis system for different conditions of roller bearings using InfraRed Thermography (IRT). In the first stage of the proposed system, 2-Dimensional Discrete Wavelet Transform (2D-DWT) and Shannon entropy are applied respectively to decompose images and seek for the desired decomposition level of the approximation coefficients. After that, the histograms of selected coefficients are used as an input of the feature space selection method by using Genetic Algorithm (GA) and Nearest Neighbor (NN), for the purpose of selecting two salient features that can achieve the highest classification accuracy. The results have demonstrated that the proposed scheme can be employed effectively as an intelligent system for bearing fault diagnosis in rotating machinery

A Feature Extraction Method Based on Information Theory for Fault Diagnosis of Reciprocating Machinery

This paper proposes a feature extraction method based on information theory for fault diagnosis of reciprocating machinery. A method to obtain symptom parameter waves is defined in the time domain using the vibration signals, and an information wave is presented based on information theory, using the symptom parameter waves. A new way to determine the difference spectrum of envelope information waves is also derived, by which the feature spectrum can be extracted clearly and machine faults can be effectively differentiated. This paper also compares the proposed method with the conventional Hilbert-transform-based envelope detection and with a wavelet analysis technique. Practical examples of diagnosis for a rolling element bearing used in a diesel engine are provided to verify the effectiveness of the proposed method. The verification results show that the bearing faults that typically occur in rolling element bearings, such as outer-race, inner-race, and roller defects, can be effectively identified by the proposed method, while these bearing faults are difficult to detect using either of the other techniques it was compared to