Vibration suppression of the horizontal flexible plate using proportional– integral–derivative controller tuned by particle swarm optimization

This paper presents the development of an active vibration control for vibration suppression of the horizontal flexible plate structure using proportional–integral–derivative controller tuned by a conventional method via Ziegler–Nichols and an intelligent method known as particle swarm optimization algorithm. Initially, the experimental rig was designed and fabricated with all edges clamped at the horizontal position of the flexible plate. Data acquisition and instrumentation systems were designed and integrated into the experimental rig to collect input–output vibration data of the flexible plate. The vibration data obtained through experimental study was used to model the system using system identification technique based on auto-regressive with exogenous input structure. The plate system was modeled using particle swarm optimization algorithm and validated using mean squared error, one-step ahead prediction, and correlation tests. The stability of the model was assessed using pole zero diagram stability. The fitness function of particle swarm optimization algorithm is defined as the mean squared error between the measured and estimated output of the horizontal flexible plate system. Next, the developed model was used in the development of an active vibration control for vibration suppression on the horizontal flexible plate system using a proportional–integral–derivative controller. The proportional–integral–derivative gains are optimally determined using two different ways, the conventional method tuned by Ziegler–Nichols tuning rules and the intelligent method tuned by particle swarm optimization algorithm. The performances of developed controllers were assessed and validated. Proportional–integral–derivative-particle swarm optimization controller achieved the highest attenuation value for first mode of vibration by achieving 47.28 dB attenuation as compared to proportional–integral–derivative-Ziegler–Nichols controller which only achieved 34.21 dB attenuation

Optimal fuzzy iterative learning control based on artificial bee colony for vibration control of piezoelectric smart structures

Combining P-type iterative learning (IL) control, fuzzy logic control and artificial bee colony (ABC) algorithm, a new optimal fuzzy IL controller is designed for active vibration control of piezoelectric smart structures. In order to accelerate the learning speed of feedback gain, the fuzzy logic controller is integrated into the ANSYS finite element (FE) models by using APDL (ANSYS Parameter Design Language) approach to adjust adaptively the learning gain of P-type IL control. For improving the performance and robustness of the fuzzy logic controller as well as diminishing human intervention in the operation process, ABC algorithm is used to automatically identify the optimal configurations for values in fuzzy query table, fuzzification parameters and defuzzification parameters, and the main program of ABC algorithm is operated in MATLAB. The active vibration equations are driven from the FE equations for the dynamic response of a linear elastic piezoelectric smart structure. Considering the vibrations generated by various external disturbances, the optimal fuzzy IL controller is numerically investigated for a clamped piezoelectric smart plate. Results demonstrate that the proposed control approach makes the feedback gain has a fast learning speed and performs excellent in vibration suppression. This is demonstrated in the results by comparing the new control approach with the P-type IL control

Evolutionary algorithms for active vibration control of flexible manipulator

Flexible manipulator systems offer numerous advantages over their rigid counterparts including light weight, faster system response, among others. However, unwanted vibration will occur when flexible manipulator is subjected to disturbances. If the advantages of flexible manipulator are not to be sacrificed, an accurate model and efficient control system must be developed. This thesis presents the development of a Proportional-Integral-Derivative (PID) controller tuning method using evolutionary algorithms (EA) for a single-link flexible manipulator system. Initially, a single link flexible manipulator rig, constrained to move in horizontal direction, was designed and fabricated. The input and output experimental data of the hub angle and endpoint acceleration of the flexible manipulator were acquired. The dynamics of the system was later modeled using a system identification (SI) method utilizing EA with linear auto regressive with exogenous (ARX) model structure. Two novel EAs, Genetic Algorithm with Parameter Exchanger (GAPE) and Particle Swarm Optimization with Explorer (PSOE) have been developed in this study by modifying the original Genetic Algorithm (GA) and Particle Swarm Optimization (PSO) algorithms. These novel algorithms were introduced for the identification of the flexible manipulator system. Their effectiveness was then evaluated in comparison to the original GA and PSO. Results indicated that the identification of the flexible manipulator system using PSOE is better compared to other methods. Next, PID controllers were tuned using EA for the input tracking and the endpoint vibration suppression of the flexible manipulator structure. For rigid motion control of hub angle, an auto-tuned PID controller was implemented. While for vibration suppression of the endpoint, several PID controllers were tuned using GA, GAPE, PSO and PSOE. The results have shown that the conventional auto-tuned PID was effective enough for the input tracking of the rigid motion. However, for end-point vibration suppression, the result showed the superiority of PID-PSOE in comparison to PID-GA, PID-GAPE and PID-PSO. The performance of the best simulated controller was validated experimentally later. Through experimental validation, it was found that the PID-PSOE was capable to suppress the vibration of the single-link flexible manipulator with highest attenuation of 31.3 dB at the first mode of the vibration. The outcomes of this research revealed the effectiveness of the PID controller tuned using PSOE for the endpoint vibration suppression of the flexible manipulator amongst other evolutionary methods

Evolutionary optimisation and real-time self-tuning active vibration control of a flexible beam system

Active vibration control has long been recognised as a solution for flexible beam structure to achieve sufficient vibration suppression. The flexible beam dynamic model is derived according to the Euler Bernoulli beam theory. The resonance frequencies of the beam are investigated analytically and the validity was experimentally verified. This thesis focuses on two main parts: proportional-integralderivative (PID) controller tuning methods based on evolutionary algorithms (EA) and real-time self-tuning control using iterative learning algorithm and poleplacement methods. Optimisation methods for determining the optimal values of proportional-integral-derivative (PID) controller parameters for active vibration control of a flexible beam system are presented. The main objective of tuning the PID controller is to obtain a fast and stable system using EA such as genetic algorithm (GA) and differential evolution (DE) algorithms. The PID controller is tuned offline based on the identified model obtained using experimental input-output data. Experimental results have shown that PID parameters tuned by EA outperformed conventional tuning method in term of better transient response. However, in term of vibration attenuation, the performance between DE, GA and Ziegler-Nichols (ZN) method produced about the same value. For real-time selftuning control, successful design and implementation has been accomplished. Two techniques, self-tuning using iterative learning algorithm and self-tuning poleplacement control were implemented to adapt the controller parameters to meet the desired performances. In self-tuning using iterative learning algorithm, its learning mechanism will automatically find new control parameters. Whereas the self tuning pole-placement control uses system identification in real time and then the control parameters are calculated online. It is observed that self-tuning using iterative learning algorithm does not require accurate model of the plant and control the vibration based on the reference error, but it is unable to maintain its transient performance due to the change of physical parameters. Meanwhile, self-tuning poleplacement controller has shown its ability to maintain its transient performance as it was designed based on the desired closed loop poles where the control system can track changes in the plant and disturbance characteristics at every sampling time. Overall results revealed the effectiveness of both control schemes in suppressing the unwanted vibration over conventional fixed gain controllers

Evolutionary swarm algorithm for modelling and control of horizontal flexible plate structures

Numerous advantages offered by the horizontal flexible structure have attracted increasing industrial applications in many engineering fields particularly in the airport baggage conveyor system, micro hand surgery and semiconductor manufacturing industry. Nevertheless, the horizontal flexible structure is often subjected to disturbance forces as vibration is easily induced in the system. The vibration reduces the performance of the system, thus leading to the structure failure when excessive stress and noise prevail. Following this, it is crucial to minimize unwanted vibration so that the effectiveness and the lifetime of the structure can be preserved. In this thesis, an intelligent proportional-integral-derivative (PID) controller has been developed for vibration suppression of a horizontal flexible plate structure. Initially, a flexible plate experimental rig was designed and fabricated with all clamped edges boundary conditions at horizontal position. Then, the data acquisition and instrumentation systems were integrated into the experimental rig. Several experimental procedures were conducted to acquire the input-output vibration data of the system. Next, the dynamics of the system was modeled using linear auto regressive with exogenous, which is optimized with three types of evolutionary swarm algorithm, namely, the particle swarm optimization (PSO), artificial bee colony (ABC) and bat algorithm (BAT) model structure. Their effectiveness was then validated using mean squared error, correlation tests and pole zero diagram stability. Results showed that the PSO algorithm has superior performance compared to the other algorithms in modeling the system by achieving lowest mean squared error of 6103947.4 , correlation of up to 95 % confidence level and good stability. Next, five types of PID based controllers were chosen to suppress the unwanted vibration, namely, PID-Ziegler Nichols (ZN), PID-PSO, PID-ABC, Fuzzy-PID and PID-Iterative Learning Algorithm (ILA). The robustness of the controllers was validated by exerting different types of disturbances on the system. Amongst all controllers, the simulation results showed that PID tuned by ABC outperformed other controllers with 47.60 dB of attenuation level at the first mode (the dominant mode) of vibration, which is equivalent to 45.99 % of reduction in vibration amplitude. By implementing the controllers experimentally, the superiority of PID-ABC based controller was further verified by achieving an attenuation of 23.83 dB at the first mode of vibration and 21.62 % of reduction in vibration amplitude. This research proved that the PID controller tuned by ABC is superior compared to other tuning algorithms for vibration suppression of the horizontal flexible plate structure

Vibration control of beams with piezoelectric sensors and actuators using particle swarm optimization

Summarization: This paper presents the design of a vibration control mechanism for a beam with bonded piezoelectric sensors and actuators. The mechanical modeling of the structure and the subsequent finite element approximation are based on the classical equations of motion, as they are derived from Hamilton’s principle, in connection with simplified modeling of the piezoelectric sensors and actuators. One nature-inspired intelligence method, the Particle Swarm Optimization, is used for the vibration control of the beam. Three different variants of the Particle Swarm Optimization were tested, namely, the simple Particle Swarm Optimization, the inertia Particle Swarm Optimization and the Constriction Particle Swarm Optimization. A linear feedback control law and a quadratic cost function are used, so that the results are comparable with the classical linear quadratic regulator approach. The same problem has been solved with two other stochastic based optimization algorithms, namely a Genetic Algorithm and a Differential Evolution and the results are used for comparison. The numerical simulation shows that sufficient vibration suppression can be achieved by means of this method.Presented on: Expert Systems with Application